Hi everybody:

I just got back from Japan with a new Centrino sub-notebook (less than 2 pounds),
the JVC- Victor Interlink XP7310, made by ASUS in Tawain.

	http://www.jvc-victor.co.jp/interlink/xp/mp-xp7310/index.html

It has a 1GHz Centrino (PentiumM + Wi/Fi) and 512MB of ram, and previously
was running Windows XP without any problems.

Unfortunately, I am unable to boot any recent GENERIC_LAPTOP kernel on this new
laptop.  During boot I always get:

=================================================================================
...
ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub0to-PCI Bridge (rev. 0x83)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
cbb0 at pci1 dev3 function function 0: Ricoh 5C475 PCI-CardBus bridge (rev. 0x68)
uvm_fault(0xc0563e40,0,0,1)->9xe
kernel: page fault
=================================================================================

I am however able to boot from GENERIC taken from current (13/12/2003).  But if
I enable ACPI in the GENERIC kernel, it crashes during boot:

=================================================================================
...
ioapic0: enabling
pcic0: controller 0 detecting irqs with mask 0xdeb8:intr_establish: pic ioapic0
pin9: can't share type 3 with 2
panic: can't get interrupt
=================================================================================

I am able to boot with a stock GENERIC kernel taken from current (13/12/2003).
Although the built in ethernet (fxp0) works, there is no Wi/Fi (IEEE 802.11)
and no ACPI.  Below are the entire boot messages from a current GENERIC kernel.
If anyone has any NetBSD kernel that they can successfully boot on a Centrino
laptop that enables the built in Wi/Fi and ACPI, please let me know, so that
I can try it.

Thanks in advance.
Alicia,

=================================================================================
NetBSD 1.6ZG (GEN) #5: Sat Dec 13 21:42:43 EST 2003
	root@luna.engine.ca:/usr/src/sys/arch/i386/compile/GEN
total memory = 502 MB
avail memory = 459 MB
using 6144 buffers containing 25848 KB of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Banias) (686-class), 1000.08 MHz, id 0x695
cpu0: features a7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR>
cpu0: features a7e9fbbf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features a7e9fbbf<FXSR,SSE,SSE2,TM,SBF>
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855GM Host-to-Hub Controller (rev. 0x02)
agp0 at pchb0: detected 8060k stolen memory
agp0: aperture size is 128M
agp0: aperture at 0xf0000000, size 0x8000000
Intel 82855GM GMCH Memory Controller (miscellaneous system, revision 0x02) at pci0 dev 0 function 1 not configured
Intel 82855GM GMCH Configuration Process (miscellaneous system, revision 0x02) at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0: Intel 82855GM GMCH Integrated Graphics Device (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel 82855GM GMCH Integrated Graphics Device (miscellaneous display, revision 0x02) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801DB/DBM USB UHCI Controller #1 (rev. 0x03)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB/DBM USB UHCI Controller #2 (rev. 0x03)
uhci1: interrupting at irq 4
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB/DBM USB UHCI Controller #3 (rev. 0x03)
uhci2: interrupting at irq 7
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
Intel 82801DB/DBM USB EHCI Controller (USB serial bus, interface 0x20, revision 0x03) at pci0 dev 29 function 7 not configured
ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x83)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
cbb0 at pci1 dev 3 function 0: Ricoh 5C475 PCI-CardBus bridge (rev. 0xb8)
cbb0: NOT USED because of unconfigured interrupt
Ricoh 5C551 PCI-CardBus bridge/Firewire (Firewire serial bus, interface 0x10) at pci1 dev 3 function 1 not configured
Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter (miscellaneous network, revision 0x04) at pci1 dev 5 function 0 not configured
fxp0 at pci1 dev 8 function 0: Intel PRO/100 VM (MOB) Network Controller, rev 131
fxp0: interrupting at irq 5
fxp0: Ethernet address 00:80:88:03:51:55
inphy0 at fxp0 phy 1: i82562EM 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801DB ISA Bridge (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: can't map codec i/o space
Intel 82801DB/DBM AC97 Modem Controller (modem communications, revision 0x03) at pci0 dev 31 function 6 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq 
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
isapnp0: no ISA Plug 'n Play devices found
pcic0: controller 0 detecting irqs with mask 0xdeb8: none
pcic0: no available irq; polling for socket events
wd0 at atabus0 drive 0: <IC25N040ATMR04-0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
=================================================================================