I have a Thinkpad 600E (2645-4AU) running very recent -current.
Without cardbus in the kernel it works fine with a Lucent wavelan
(pcmcia card).

With cardbus, the bridges are found but no card is detected.  Not
detected if present on boot, and not detected when inserted.  I'm
wondering if irq11 is correct (i.e. if it really works), and if I need
to change the bios to use a different one.

I have never been able to make cardbus work on NetBSD on this machine
or on a 600 (2645-41U).  (I have not tried FreeBSD 5 or Linux.)

Googling returned two things that don't look like the same situation,
but might be related:

http://mail-index.netbsd.org/netbsd-bugs/2000/06/23/0000.html
http://mail-index.netbsd.org/netbsd-bugs/2000/06/14/0009.html

My dmesg when booting with cardbus support follows.  pcmcia0 and
cardbus0 are both attached to cardslot0/cbb0 (the main one; cbb1 is
for the docking station, or at least pcic1 is when I use them in
pcmcia mode).

I just got some cardbus cards (atheros and admtek 802.11); I'll try
inserting those.

Any clues would be appreciated.

    Thanks,
    Greg

NetBSD 1.6ZE (FOOBAR) #2: Mon Nov  3 20:30:05 EST 2003
	gdt@foobar:/usr/src/sys/arch/i386/compile/FOOBAR
total memory = 191 MB
avail memory = 173 MB
using 2475 buffers containing 9900 KB of memory
BIOS32 rev. 0 found at 0xfd820
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium II (686-class), 363.98 MHz, id 0x66a
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 256 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0x40000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x20)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
cbb0 at pci0 dev 2 function 0: Texas Instruments PCI1251 PCI-CardBus Bridge (rev. 0x00)
cbb1 at pci0 dev 2 function 1: Texas Instruments PCI1251 PCI-CardBus Bridge (rev. 0x00)
Cirrus Logic CS4610 SoundFusion Audio Accelerator (audio multimedia, revision 0x01) at pci0 dev 6 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1
pciide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to compatibility mode
pciide0: primary channel interrupting at irq 14
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel interrupting at irq 15
atabus1 at pciide0 channel 1
pciide0: secondary channel ignored (not responding; disabled or no drives?)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
cbb0: interrupting at irq 11
cbb0: cacheline 0x8 lattimer 0xb0
cbb0: bhlc 0x82a808 lscp 0xb0040200
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cbb1: cacheline 0x8 lattimer 0xb0
cbb1: bhlc 0x82a808 lscp 0xb0070500
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.02
audio0 at sb0: half duplex, mmap, independent
opl at sb0 not configured
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0: <IBM-DJSA-230>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 28615 MB, 58140 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: v3.4.29 initialized.  Default = block all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)