Sorry, that was to say, the device remained unconfigured until I
modified the product id value in the diff to the appropriate #define. I
was trying things as I compiled the email. Sorry for the confusion.

James Baldwin

> -----Original Message-----
> From: Baldwin, James
> Sent: Monday, September 08, 2003 1:14 AM
> To: port-i386@NetBSD.org
> Subject: RE: 3CCFEM656BT
>=20
> I found the following in the archives:
> http://mail-index.netbsd.org/port-i386/2001/03/09/0009.html
>=20
> However, this does not appear to work for this model. After
recompiling
> -current with the diffs above the system, modified for the appropriate
> product id, becomes unusable and the device remains unconfigured. The
> system boots, however, any attempt to login fails and a kernel message
> is logged:
> nsendsig: bad version 0
>=20
> the device is configured as such in this case:
> ex0 at cardbus1 dev 0 function 0: 3Com 3c656bt Ethernet
>=20
> dmesg output before patch:
> 3Com Corporation, 3CCFEM656BT, LAN, 0 (manufacturer 0x0, product 0x0)
> 3Com product 0x6560 (Ethernet network, revision 0x02) at cardbus1 dev
0
> function 0 not configured
>=20
> James Baldwin
>=20
> > -----Original Message-----
> > From: Baldwin, James
> > Sent: Sunday, September 07, 2003 3:00 AM
> > To: port-i386@NetBSD.org
> > Subject: 3CCFEM656BT
> >
> > Is anyone currently working on porting the 3CCFEM656BT 3Com Cardbus
> > Network card? I see the product id in dev/cardbus/cardbusdevs.h,
> > however, it is not included in ex_cardbus_products[] from
> > dev/cardbus/if_ex_cardbus.h. I'm not sure how to find out any of the
> > information reqired for the softc clags, CSR flags, or card type. If
> > anyone has a patch for the 3CCFEM656, or ideas where I could find
the
> > appropriate information, I'd be grateful.
> >
> > Excerpt from cardbusdevs.h:
> > #define CARDBUS_PRODUCT_3COM_3C656_E    0x6560          /* 3CCFEM656
> > 10/100 Ethe
> > rnet */
> >
> > Excerpt from if_ex_cardbus.c:
> > const struct ex_cardbus_product {
> >         u_int32_t       ecp_prodid;     /* CardBus product ID */
> >         int             ecp_flags;      /* initial softc flags */
> >         pcireg_t        ecp_csr;        /* PCI CSR flags */
> >         int             ecp_cardtype;   /* card type */
> >         const char      *ecp_name;      /* device name */
> > } ex_cardbus_products[] =3D {
> >         { CARDBUS_PRODUCT_3COM_3C575TX,
> >           EX_CONF_MII | EX_CONF_EEPROM_OFF | EX_CONF_EEPROM_8BIT,
> >           CARDBUS_COMMAND_IO_ENABLE | CARDBUS_COMMAND_MASTER_ENABLE,
> >           EX_CB_BOOMERANG,
> >           "3c575-TX Ethernet" },
> >
> >         { CARDBUS
> > EX_CONF_90XB|EX_CONF_MII|EX_CONF_INV_LED_POLARITY |
> >             EX_CONF_EEPROM_OFF | EX_CONF_EEPROM_8BIT,
> >           CARDBUS_COMMAND_IO_ENABLE | CARDBUS_COMMAND_MEM_ENABLE |
> >               CARDBUS_COMMAND_MASTER_ENABLE,
> >           EX_CB_CYCLONE,
> >           "3c575B-TX Ethernet" },
> >
> >         { CARDBUS_PRODUCT_3COM_3C575CTX,
> >           EX_CONF_90XB | EX_CONF_PHY_POWER | EX_CONF_EEPROM_OFF |
> >             EX_CONF_EEPROM_8BIT,
> >           CARDBUS_COMMAND_IO_ENABLE | CARDBUS_COMMAND_MEM_ENABLE |
> >               CARDBUS_COMMAND_MASTER_ENABLE,
> >           EX_CB_CYCLONE,
> >           "3c575CT Ethernet" },
> >
> >         { 0,
> >           0,
> >           0,
> >           0,
> >           NULL },
> > };_PRODUCT_3COM_3C575BTX,
>=20