> are caches on? :)

I am not sure. The dmesg is below:


NetBSD 1.6U (GENERIC) #1: Fri Jul  4 21:05:47 PDT 2003

root@hawk.openserve.net:/autobuild/src/sys/arch/i386/compile/obj/GENERIC
total memory = 1023 MB
avail memory = 943 MB
using 6144 buffers containing 52508 KB of memory
BIOS32 rev. 0 found at 0xfdb80
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 2400.31 MHz, id 0xf27
cpu0: features
bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 512 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CMIC_SL Host (rev. 0x32)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CMIC_SL Host (rev. 0x00)
pci1 at pchb1 bus 255
pci1: no spaces enabled!
iop0 at pci0 dev 1 function 0: I2O adapter <ADAPTEC 2010S>
iop0: interrupting at irq 11
vga1 at pci0 dev 6 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
fxp0 at pci0 dev 7 function 0: i82550 Ethernet, rev 16
fxp0: interrupting at irq 5
fxp0: Ethernet address 00:30:48:52:0d:84
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bge0 at pci0 dev 8 function 0: Broadcom BCM5702X Gigabit Ethernet
bge0: interrupting at irq 9
bge0: ASIC BCM5703 A2, Ethernet address 00:30:48:52:0d:85
brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
pchb2 at pci0 dev 15 function 0
pchb2: ServerWorks product 0x0203 (rev. 0xa0)
pciide0 at pci0 dev 15 function 1: ServerWorks CSB6 RAID/IDE Controller
(rev. 0xa0)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 0: <SONY    CD-RW  CRX300E, , KYS1> cdrom
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: primary channel interrupting at irq 14
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
(Ultra/33) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel interrupting at irq 15
ohci0 at pci0 dev 15 function 2: ServerWorks product 0x0221 (rev. 0x05)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3
pcib0: ServerWorks product 0x0227 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
iop0: configuring...
dpti0 at iop0 tid 0: DPT/Adaptec RAID management interface
ld0 at iop0 tid 517: <ADAPTEC R, RAID-1, 3A0JD> direct access, fixed
ld0: 35003 MB, 8889 cyl, 128 head, 63 sec, 512 bytes/sect x 71686144
sectors
iopsp0 at iop0 tid 8: SCSI port <ADAPTEC, AIC-7902, 00000001>
iopsp0: 16-bit, max sync rate 160MHz, initiator ID 7
iopsp0: target 0 (tid 513): 16-bit, synchronous at 156MHz, offset 0x3f
iopsp0: target 0,0 (tid 513): in use by tid 515
iopsp0: target 1 (tid 514): 16-bit, synchronous at 156MHz, offset 0x3f
iopsp0: target 1,0 (tid 514): in use by tid 516
scsibus0 at iopsp0: 16 targets, 8 luns per target
iopsp1 at iop0 tid 9: SCSI port <ADAPTEC, AIC-7902, 00000001>
iopsp1: 16-bit, max sync rate 160MHz, initiator ID 7
scsibus1 at iopsp1: 16 targets, 8 luns per target
Kernelized RAIDframe activated
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)