I've been trying to get a wireless ethernet card to work in a Sony Vaio
PCG-QR10. The card is recognised, but the driver fails to attach properly
because being unable to find any irqs.

I've switched off PNP OS in the BIOS (which got the onboard ethernet
working). I've updated the BIOS (no change). There are no other relevant
BIOS options.

Attached is a dmesg.

NetBSD 1.6.1 (THINIT) #16: Mon Jun 16 14:56:03 BST 2003
    root@netmanager:/usr/src/sys/arch/i386/compile/THINIT
cpu0: Intel Pentium III (Coppermine) Celeron (686-class), 645.92 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 128 KB 32b/line 4-way
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
total memory = 63548 KB
avail memory = 53284 KB
using 819 buffers containing 3276 KB of memory
BIOS32 rev. 0 found at 0xfd878
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82815 Hub (rev. 0x11)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
vga1 at pci0 dev 2 function 0: Intel 82815 Graphics (rev. 0x11)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Texas Instruments TSB43AA22 OHCI IEEE 1394 Host Controller (Firewire serial bus, interface 0x10, revision 0x02) at pci1 dev 0 function 0 not configured
Ricoh 5C476 PCI-CardBus bridge (CardBus bridge, revision 0x80) at pci1 dev 2 function 0 not configured
Ricoh 5C476 PCI-CardBus bridge (CardBus bridge, revision 0x80) at pci1 dev 2 function 1 not configured
fxp0 at pci1 dev 8 function 0: Intel i82562 Ethernet, rev 3
fxp0: interrupting at irq 9
fxp0: Ethernet address 08:00:46:20:af:a4
ukphy0 at fxp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: i82562ET 10/100 media interface (OUI 0x005500, model 0x0033), rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801BAM LPC Interface Bridge (rev. 0x03)
pciide0 at pci0 dev 31 function 1: Intel 82801BAM IDE Controller (ICH2) (rev. 0x03)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1016GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9590 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19640880 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CD-224E, , 1.5A> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x03)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801BA SMBus Controller (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4: Intel 82801BA USB Controller (rev. 0x03)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5: i82801BA (ICH2) AC-97 Audio
auich0: interrupting at irq 5
auich0: ADS72 codec; headphone, Analog Devices Phat Stereo
audio0 at auich0: full duplex, mmap, independent
Intel 82801BA AC-97 PCI Modem (modem communications, revision 0x03) at pci0 dev 31 function 6 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq 
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
biomask efdd netmask efdd ttymask ffdf
pcic0: controller 0 detecting irqs with mask 0xdeb8: none
pcic0: no available irq; polling for socket events
wi0 at pcmcia1 function 0: NETGEAR MA401 Wireless PC, Card, Version 01.00
wi0: port 0x400-0x43f
wi0: couldn't establish interrupt
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs