In message "NetBSD on the Intel centrino processor ?"
    on 03/04/22, Florence HENRY <Florence.Henry@obspm.fr> writes:
> I plan to replace my old Dell laptop running fine NetBSD by a new Dell
> (latitude D600) shiped with the the Intel Centrino processor.
> 
> I've been told that there were some problems with this new processor
> because Intel refused to give the linux drivers
> (http://www.theregister.co.uk/content/4/29840.html)

NetBSD-current works fine on ThinkPad T40 except 802.11b and
AC97 modem.

-- 
TAMURA Kent <kent2003@hauN.org> <kent@netbsd.org>


NetBSD 1.6R (T40) #1: Fri Apr 25 11:06:00 JST 2003
	kent@t40:/sys/arch/i386/compile/T40
total memory = 510 MB
avail memory = 466 MB
using 6144 buffers containing 26260 KB of memory
BIOS32 rev. 0 found at 0xfd780
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium-M (Banias) (686-class), 1598.73 MHz, id 0x695
cpu0: features a7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
cpu0: features a7e9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features a7e9f9bf<FXSR,SSE,SSE2,TM,SBF>
acpi0 at mainbus0
acpi0: X/RSDT: OemId <IBM   ,TP-1R   ,00001030>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C01 at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0800 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0 irq 13
npx1: using exception 16
PNP0B00 at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (IBM3780): aux port
pckbc2: irq 12
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
    ACPI-1286: *** Error: Method execution failed [\_SB_.PCI0.LPC_.FDC_._FDE] (Node 0xc10b83e0), AE_AML_NO_RETURN_VALUE
acpiec0 at acpi0 (PNP0C09-<null>): ACPI Embedded Controller
acpiec0: io 0x62,0x66
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-<null>): ACPI Battery (Control Method)
acpibat1 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003-<null>): ACPI AC Adapter
IBM0068 at acpi0 not configured
acpitz0 at acpi0 (): ACPI Thermal Zone
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x3340 (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: Intel product 0x3341 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M9 (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801DB/DBM USB UHCI Controller #1 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB/DBM USB UHCI Controller #2 (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB/DBM USB UHCI Controller #3 (rev. 0x01)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB/DBM USB EHCI Controller (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments product 0xac55 (rev. 0x01)
cbb1 at pci2 dev 0 function 1: Texas Instruments product 0xac55 (rev. 0x01)
wm0 at pci2 dev 1 function 0: Intel i82540EP 1000BASE-T Ethernet, rev. 3
wm0: interrupting at irq 11
wm0: Ethernet address 00:09:6b:82:70:5b
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Intel product 0x1043 (miscellaneous network, revision 0x04) at pci2 dev 2 function 0 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x24cc (rev. 0x01)
pciide0 at pci0 dev 31 function 1: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IC25N080ATMR04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 72979 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 149462513 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <UJDA745 DVD/CDRW, , 1.02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
Intel 82801DB/DBM SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 11
auich0: 20 bit precision support
auich0: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ext id 0601<PRIMARY,AC97_22,AMAP,34_78_69,VRA>
audio0 at auich0: full duplex, mmap, independent
Intel 82801DB/DBM AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
auich0: measured ac97 link rate at 45600 Hz, will use 48000 Hz
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Chicony USB Keyboard, rev 1.10/1.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)