Hi

This is known bug ;-) I see them since 1.5

Greetings


Tsiteerimine David <abs@mono.org>:

> 	I'm getting various 'pciide0:1:0: lost interrupt' errors on two
> 	boxes under load. They are running raidframe on 1.6.1.
> 	Running bonnie++ is a great way to trigger a massive load of them.
> 	I'm not seeing any problems on a variety of other i386 boxes
> 	running raidframe including a virtually identical box (PII 233 rather
> 	than 266). These two are external DNS and gateway boxes hence the
> 	small disks :)
> 
> 	Anything I should be looking for here? (the boxes run fun,
> 	albeit with the occasional stutter)
> 
> 	dmesg1:
> 
> cpu0: Intel Pentium II (Klamath) (686-class), 267.28 MHz
> [...]
> avail memory = 172 MB
> [...]
> pciide0 at pci0 dev 2 function 1: Intel 82371AB IDE controller (PIIX4) (rev.
> 0x0
> 1)
> pciide0: bus-master DMA support present
> pciide0: primary channel wired to compatibility mode
> wd0 at pciide0 channel 0 drive 0: <QUANTUM BIGFOOT_CY4320A>
> wd0: drive supports 16-sector PIO transfers, LBA addressing
> wd0: 4134 MB, 8960 cyl, 15 head, 63 sec, 512 bytes/sect x 8467200 sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2
> pciide0: primary channel interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
> pciide0: secondary channel wired to compatibility mode
> atapibus0 at pciide0 channel 1: 2 targets
> cd0 at atapibus0 drive 1: <MATSHITA CR-585, , ZS15> type 5 cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 3, DMA mode 1
> wd1 at pciide0 channel 1 drive 0: <QUANTUM BIGFOOT_CY4320A>
> wd1: drive supports 16-sector PIO transfers, LBA addressing
> wd1: 4134 MB, 8960 cyl, 15 head, 63 sec, 512 bytes/sect x 8467200 sectors
> wd1: 32-bit data port
> wd1: drive supports PIO mode 4, DMA mode 2
> pciide0: secondary channel interrupting at irq 15
> wd1(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
> cd0(pciide0:1:1): using PIO mode 0, DMA mode 1 (using DMA data transfers)
> 
> 	dmesg2:
> 
> cpu0: Intel Pentium II (Klamath) (686-class), 267.29 MHz
> [...]
> avail memory = 54812 KB
> [...]
> pciide0 at pci0 dev 2 function 1: Intel 82371AB IDE controller (PIIX4) (rev.
> 0x0
> 1)
> pciide0: bus-master DMA support present
> pciide0: primary channel wired to compatibility mode
> wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL SE4.3A>
> wd0: drive supports 16-sector PIO transfers, LBA addressing
> wd0: 4110 MB, 14848 cyl, 9 head, 63 sec, 512 bytes/sect x 8418816 sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
> pciide0: primary channel interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
> data
> transfers)
> pciide0: secondary channel wired to compatibility mode
> atapibus0 at pciide0 channel 1: 2 targets
> cd0 at atapibus0 drive 1: <SAMSUNG CD-ROM SCR-3231, , S104> type 5 cdrom
> removab
> le
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2
> wd1 at pciide0 channel 1 drive 0: <QUANTUM BIGFOOT_CY4320A>
> wd1: drive supports 16-sector PIO transfers, LBA addressing
> wd1: 4134 MB, 8960 cyl, 15 head, 63 sec, 512 bytes/sect x 8467200 sectors
> wd1: 32-bit data port
> wd1: drive supports PIO mode 4, DMA mode 2
> pciide0: secondary channel interrupting at irq 15
> wd1(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
> cd0(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
> 
> 	errors:
> 
> wd1a: error reading fsbn 2721600 of 2721600-2721727 (wd1 bn 2722545; cn 2881
> tn
> 0 sn 0), retrying
> wd1: (aborted command)
> wd1: soft error (corrected)
> wd0a: error reading fsbn 6619840 of 6619840-6619967 (wd0 bn 6620785; cn 7006
> tn
> 1 sn 52), retrying
> wd0: (aborted command)
> wd0: soft error (corrected)
> pciide0:1:0: lost interrupt
>         type: ata tc_bcount: 65536 tc_skip: 0
> pciide0:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd1a: DMA error writing fsbn 6021696 of 6021696-6021823 (wd1 bn 6022641; cn
> 6373
>  tn 2 sn 30), retrying
> pciide0:0:0: lost interrupt
>         type: ata tc_bcount: 65536 tc_skip: 0
> pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
> wd0a: DMA error writing fsbn 6021952 of 6021952-6022079 (wd0 bn 6022897; cn
> 6373
>  tn 6 sn 34), retrying
> wd1: soft error (corrected)
> wd0: soft error (corrected)
> pciide0:1:0: lost interrupt
>         type: ata tc_bcount: 49152 tc_skip: 0
> pciide0:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd1a: DMA error writing fsbn 6039488 of 6039488-6039583 (wd1 bn 6040433; cn
> 6391
>  tn 14 sn 56), retrying
> pciide0:0:0: lost interrupt
>         type: ata tc_bcount: 49152 tc_skip: 0
> pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
> wd0a: DMA error writing fsbn 6039616 of 6039616-6039711 (wd0 bn 6040561; cn
> 6392
>  tn 1 sn 58), retrying
> wd1: soft error (corrected)
> wd0: soft error (corrected)
> pciide0:1:0: lost interrupt
>         type: ata tc_bcount: 32768 tc_skip: 0
> pciide0:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd1a: DMA error writing fsbn 5739136 of 5739136-5739199 (wd1 bn 5740081; cn
> 6074
>  tn 2 sn 25), retrying
> wd1: soft error (corrected)
> pciide0:1:0: lost interrupt
>         type: ata tc_bcount: 49152 tc_skip: 0
> pciide0:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd1a: DMA error writing fsbn 6193504 of 6193504-6193599 (wd1 bn 6194449; cn
> 6554
>  tn 14 sn 37), retrying
> wd1: soft error (corrected)
> 
> 
> -- 
> 		David Brownlee
> 




---------------------------------------------
Powered By "NetBSD" http://www.netbsd.org/