Subject: ACPI kernel on Thinkpad X30
To: None <kanaoka@ann.hi-ho.ne.jp, port-i386@netbsd.org>
From: Gilbert Fernandes <gilbertf@netbsd-fr.org>
List: port-i386
Date: 04/12/2003 01:23:07
Here is the dmesg for the current ACPI kernel
on a Thinkpad X30 laptop model from IBM.
Thanks to Kanaoka for the kernel ;-)
Here we go :
----
NetBSD 1.6R (GENERIC_ACPI) #0: Thu Apr 10 10:12:16 JST 2003
root@idea.k.vnop.net:/sys/arch/i386/compile/GENERIC_ACPI
total memory = 246 MB
avail memory = 223 MB
using 3187 buffers containing 12748 KB of memory
BIOS32 rev. 0 found at 0xfd7f0
PCI BIOS rev. 2.1 found at 0xfd90e
pcibios: config mechanism [1][x], special cycles [x][x], last bus 7
PCI IRQ Routing Table rev. 1.0 found at 0xfdec0, size 240 bytes (13 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
PCI fixup examining 8086:3575
PCI fixup examining 8086:3577
PCI fixup examining 8086:3577
PCI fixup examining 8086:2482
PCI fixup examining 8086:2484
PCI fixup examining 8086:2487
PCI fixup examining 8086:2448
PCI fixup examining 1180:476
PCI bridge 1: primary 1, secondary 2, subordinate 2
PCI fixup examining 1180:476
PCI bridge 2: primary 1, secondary 3, subordinate 3
PCI fixup examining 1180:552
PCI fixup examining 1260:3873
PCI fixup examining 8086:1031
PCI bridge 0: primary 0, secondary 1, subordinate 3
PCI fixup examining 8086:248c
PCI fixup examining 8086:248a
PCI fixup examining 8086:2483
PCI fixup examining 8086:2485
PCI fixup examining 8086:2486
PCI bus #3 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3575
[OK]
000:02:0 0x8086 0x3577
10h mem 0xe0000000 0x08000000
14h mem 0xd0000000 0x00080000
[OK]
000:02:1 0x8086 0x3577
10h mem 0xe8000000 0x08000000
14h mem 0xd0080000 0x00080000
[OK]
000:29:0 0x8086 0x2482
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x2484
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x2487
20h port 0x00001840 0x00000020
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x248c
[OK]
000:31:1 0x8086 0x248a
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x00001860 0x00000010
24h mem 0x00000000 0x00000400
[NG]
000:31:3 0x8086 0x2483
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x2485
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
[OK]
000:31:6 0x8086 0x2486
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:00:0 0x1180 0x0476
10h mem 0x50000000 0x00001000
[OK]
001:00:1 0x1180 0x0476
10h mem 0x50100000 0x00001000
[OK]
001:00:2 0x1180 0x0552
10h mem 0xd0201000 0x00000800
[OK]
001:02:0 0x1260 0x3873
10h mem 0xf8000000 0x00001000
[OK]
001:08:0 0x8086 0x1031
10h mem 0xd0200000 0x00001000
14h port 0x00007000 0x00000040
[OK]
--------------------------[ 1 devices bogus]
Physical memory end: 0x0f75c000
PCI memory mapped I/O space start: 0x0f800000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3575
[OK]
000:02:0 0x8086 0x3577
10h mem 0xe0000000 0x08000000
14h mem 0xd0000000 0x00080000
[OK]
000:02:1 0x8086 0x3577
10h mem 0xe8000000 0x08000000
14h mem 0xd0080000 0x00080000
[OK]
000:29:0 0x8086 0x2482
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x2484
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x2487
20h port 0x00001840 0x00000020
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x248c
[OK]
000:31:1 0x8086 0x248a
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x00001860 0x00000010
24h mem 0x0f800000 0x00000400
[OK]
000:31:3 0x8086 0x2483
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x2485
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
[OK]
000:31:6 0x8086 0x2486
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:00:0 0x1180 0x0476
10h mem 0x50000000 0x00001000
[OK]
001:00:1 0x1180 0x0476
10h mem 0x50100000 0x00001000
[OK]
001:00:2 0x1180 0x0552
10h mem 0xd0201000 0x00000800
[OK]
001:02:0 0x1260 0x3873
10h mem 0xf8000000 0x00001000
[OK]
001:08:0 0x8086 0x1031
10h mem 0xd0200000 0x00001000
14h port 0x00007000 0x00000040
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
tbxface-0198 [01] AcpiLoadTables : ACPI Tables successfully acquired
Parsing all Control Methods:......................................................................................................................................................................................................................................................................................................................................................................................................................
Table [DSDT] - 1276 Objects with 61 Devices 406 Methods 18 Regions
Parsing all Control Methods:
Table [SSDT] - 0 Objects with 0 Devices 0 Methods 0 Regions
ACPI Namespace successfully loaded at root 0xc05c321c
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium III (686-class), 1196.07 MHz, id 0x6b4
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 512 KB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
acpi0 at mainbus0
acpi0: X/RSDT: OemId <IBM ,TP-1K ,00001030>, AslId < LTP,00000000>
evxfevnt-0173 [02] AcpiEnable : Transition to ACPI mode successful
evgpeblk-0513 [04] EvCreateGpeBlock : GPE Block: 2 registers at 0000000000001028
evgpeblk-0518 [04] EvCreateGpeBlock : GPE Block defined as GPE0 to GPE15
evgpeblk-0217 [06] EvSaveMethodInfo : GPE number associated with method _L18 is not valid
evgpeblk-0513 [04] EvCreateGpeBlock : GPE Block: 2 registers at 000000000000102C
evgpeblk-0518 [04] EvCreateGpeBlock : GPE Block defined as GPE16 to GPE31
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
acpi_pci_fixup starts:
acpi0: fixup: _BBN success, bus # was 0 now 0
acpi0: fixing up PCI bus 0 at level 1
acpi0: fixing up intr link \134_SB_.LNKH
acpi fixup pci intr: 0:31:1 A: 255 -> 11
acpi0: fixing up PCI bus 1 at level 2
acpi0: fixing up PCI bus 2 at level 3
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C01 at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0800 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0 irq 13
npx1: using exception 16
PNP0B00 at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (IBM3780): aux port
pckbc2: irq 12
com3 at acpi0 (PNP0501)
com3: io 0x3f8-0x3ff irq 4
com3: ns16550a, working fifo
lpt3 at acpi0 (PNP0401)
lpt3: io 0x3bc-0x3be,0x7bc-0x7be irq 7 drq 0
com4 at acpi0 (IBM0071)
com4: io 0x2f8-0x2ff irq 3 drq 3
com4: ns16550a, working fifo
acpiec0 at acpi0 (PNP0C09-<null>): ACPI Embedded Controller
acpiec0: io 0x62,0x66
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-<null>): ACPI Battery (Control Method)
acpibat1 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003-<null>): ACPI AC Adapter
IBM0068 at acpi0 not configured
acpitz0 at acpi0 (): ACPI Thermal Zone
acpitz0: failed to evaluate _TZP: 5
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82830MP CPU to I/O Bridge 1 (rev. 0x04)
agp0 at pchb0: detected 8060k stolen memory
agp0: aperture size is 128M
: aperture at 0xe0000000, size 0x8000000
vga1 at pci0 dev 2 function 0: Intel 82830MP Integrated Video (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
Intel 82830MP Integrated Video (miscellaneous display) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x42)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
cbb0 at pci1 dev 0 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa8)
cbb1 at pci1 dev 0 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa8)
Ricoh 5C552 PCI-CardBus bridge/Firewire (Firewire serial bus, interface 0x10) at pci1 dev 0 function 2 not configured
Intersil Intersil PRISM2.5 Mini-PCI WLAN (miscellaneous network, revision 0x01) at pci1 dev 2 function 0 not configured
fxp0 at pci1 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:09:6b:a0:3a:19
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
pciide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 11
auich0: Analog Devices AD1981A codec; headphone, 20 bit DAC, no 3D stereo
auich0: variable rate audio
audio0 at auich0: full duplex, mmap, independent
Intel 82801CA/CAM Modem (modem communications, revision 0x02) at pci0 dev 31 function 6 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 39160 Hz, will use 48000 Hz
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
----
--
Gilbert Fernandes