On Sat, 5 Apr 2003, Masanori Kanaoka wrote:
> If possible,Would you please disable PCIBIOS_INTR_FIXUP?
> I hope that it may help for you.

I have disabled all PCIBIOS_* options and only left PCIBIOS itself in, and
still "reboot" doesn't work. It doesn't find space for some devices with
the PCIBIOS_ADDR_FIXUP option though (uhci2, fwohci0, auich0). New dmesg
is attached below.


 - Hubert

NetBSD 1.6Q (NOON) #2: Mon Apr  7 07:06:28 CEST 2003
	feyrer@noon:/sys/arch/i386/compile/NOON
total memory = 511 MB
avail memory = 470 MB
using 6144 buffers containing 26284 KB of memory
BIOS32 rev. 0 found at 0xfb7fd
PCI BIOS rev. 2.1 found at 0xfcd8a
pcibios: config mechanism [1][x], special cycles [x][x], last bus 5
PCI IRQ Routing Table rev. 1.0 found at 0xf01a0, size 176 bytes (9 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 1794.30 MHz, id 0xf24
cpu0: features 3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 3febf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features 3febf9ff<FXSR,SSE,SSE2,SS,HTT,TM>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 512 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
acpi0 at mainbus0
acpi0: X/RSDT: OemId <TOSHIB,5100    ,20020408>, AslId <TASM,04010000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi_allocate_resources: res=1
acpi: activate failed for SMCF010
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
TOS6205 at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
TOS6200 at acpi0 not configured
TOS6201 at acpi0 not configured
TOS6202 at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0 (): ACPI Thermal Zone
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: unable to establish interrupt for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82845 Host (rev. 0x04)
agp0 at pchb0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation product 0x0174 (rev. 0xa3)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci1: interrupting at irq 7
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci2: can't map i/o space
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
fwohci0 at pci2 dev 7 function 0: Texas Instruments TSB43AA22/A OHCI IEEE 1394 Host Controller (rev. 0x00)
fwohci0: can't map OHCI register space
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
fxp0: interrupting at irq 4
fxp0: Ethernet address 00:00:39:a5:8a:c4
ukphy0 at fxp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: i82562ET 10/100 media interface (OUI 0x005500, model 0x0033), rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci2 dev 11 function 0: Toshiba ToPIC100 CardBus-PCI Bridge (rev. 0x32)
cbb0: NOT USED because of unconfigured interrupt
cbb1 at pci2 dev 11 function 1: Toshiba ToPIC100 CardBus-PCI Bridge (rev. 0x32)
cbb1: NOT USED because of unconfigured interrupt
Toshiba product 0x0804 (miscellaneous system, revision 0x03) at pci2 dev 12 function 0 not configured
Toshiba product 0x0805 (miscellaneous system, revision 0x03) at pci2 dev 13 function 0 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
pciide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4019GAX>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <UJDA730 DVD/CDRW, , 1.00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: can't map codec i/o space
Intel 82801CA/CAM Modem (modem communications, revision 0x02) at pci0 dev 31 function 6 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ACPI: WARNING: Callback scheduled before thread present.
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Synaptics Inc. Synaptics Touchpad, rev 1.10/0.04, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons
wsmouse1 at ums0 mux 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Accounting started
pckbc: command timeout
pms_enable: command error 35
pckbc: command timeout
pckbc: command timeout
pms_disable: command error
pckbc: command timeout
pms_enable: command error 35
pckbc: command timeout
pms_disable: command error