Subject: Re: built-in wi on sony vaio
To: Manuel Bouyer <bouyer@antioche.lip6.fr>
From: Lennart Augustsson <lennart@augustsson.net>
List: port-i386
Date: 03/26/2003 16:48:55
Have you tried ACPI?
-- Lennart
Manuel Bouyer wrote:
>Hi,
>I tried to get the build-in wireless interface on a sony vaio (model
>PGC-R600HMDP) to work, without success. The bios doens't assign it an
>interrupt, and the various pcibios options fails to allocate one too.
>Attached is the message boot (from a 1.6.1_RC2 kernel with intel 830MP support
>pulled up; I tried a current kernel with the same result).
>It looks like the device doens't even appear in the messages from
>PCIBIOS interrupt routines (but it appears in the IO/Mem PCIBIOS table).
>Any idea ?
>
>--
>Manuel Bouyer, LIP6, Universite Paris VI. Manuel.Bouyer@lip6.fr
> NetBSD: 24 ans d'experience feront toujours la difference
>--
>
>
>------------------------------------------------------------------------
>
>NetBSD 1.6.1_RC2 (GENRIC-manu) #3: Tue Mar 25 18:44:09 CET 2003
> bouyer@pop:/local/pop1/bouyer/netbsd-1-6/src/sys/arch/i386/compile/GENRIC-manu
>cpu0: Intel Pentium III (Tualatin) (686-class), 1193.17 MHz
>cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
>cpu0: L2 cache 512 KB 32b/line 8-way
>cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
>cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
>cpu0: features 383f9ff<FXSR,SSE>
>total memory = 254 MB
>avail memory = 229 MB
>using 3277 buffers containing 13108 KB of memory
>BIOS32 rev. 0 found at 0xfd871
>PCI BIOS rev. 2.1 found at 0xfd9aa
>pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
>PCI IRQ Routing Table rev. 1.0 found at 0xfdf30, size 176 bytes (9 entries)
>PCI Interrupt Router at 000:31:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
>PIR Entry 0:
> Bus: 0 Device: 30
> INTA: link 0x00 bitmap 0xdef8
> INTB: link 0x00 bitmap 0xdef8
> INTC: link 0x00 bitmap 0xdef8
> INTD: link 0x00 bitmap 0xdef8
>PIR Entry 1:
> Bus: 2 Device: 2
> INTA: link 0x00 bitmap 0xdef8
> INTB: link 0x00 bitmap 0xdef8
> INTC: link 0x00 bitmap 0xdef8
> INTD: link 0x00 bitmap 0xdef8
>PIR Entry 2:
> Bus: 2 Device: 5
> INTA: link 0x69 bitmap 0x0008
> INTB: link 0x00 bitmap 0xdef8
> INTC: link 0x00 bitmap 0xdef8
> INTD: link 0x00 bitmap 0xdef8
>PIR Entry 3:
> Bus: 2 Device: 8
> INTA: link 0x68 bitmap 0x0200
> INTB: link 0x00 bitmap 0xdef8
> INTC: link 0x00 bitmap 0xdef8
> INTD: link 0x00 bitmap 0xdef8
>PIR Entry 4:
> Bus: 0 Device: 0
> INTA: link 0x00 bitmap 0xdef8
> INTB: link 0x00 bitmap 0xdef8
> INTC: link 0x00 bitmap 0xdef8
> INTD: link 0x00 bitmap 0xdef8
>PIR Entry 5:
> Bus: 0 Device: 31
> INTA: link 0x00 bitmap 0xdef8
> INTB: link 0x00 bitmap 0xdef8
> INTC: link 0x00 bitmap 0xdef8
> INTD: link 0x00 bitmap 0xdef8
>PIR Entry 6:
> Bus: 0 Device: 29
> INTA: link 0x60 bitmap 0x0200
> INTB: link 0x63 bitmap 0x0200
> INTC: link 0x00 bitmap 0xdef8
> INTD: link 0x00 bitmap 0xdef8
>PIR Entry 7:
> Bus: 0 Device: 2
> INTA: link 0x60 bitmap 0x0200
> INTB: link 0x00 bitmap 0xdef8
> INTC: link 0x00 bitmap 0xdef8
> INTD: link 0x00 bitmap 0xdef8
>PIR Entry 8:
> Bus: 0 Device: 1
> INTA: link 0x60 bitmap 0x0200
> INTB: link 0x00 bitmap 0xdef8
> INTC: link 0x00 bitmap 0xdef8
> INTD: link 0x00 bitmap 0xdef8
>pciintr_link_fixup: PIRQ 0x00 already connected to IRQ 9
>pciintr_link_fixup: PIRQ 0x03 already connected to IRQ 9
>pciintr_link_route: route of PIRQ 0x00 -> IRQ 9 preserved BIOS setting
>pciintr_link_route: route of PIRQ 0x03 -> IRQ 9 preserved BIOS setting
>------------------------------------------
> device vendor product pin PIRQ IRQ stage
>------------------------------------------
>000:02:0 0x8086 0x3577 A 0x00 9 0 already assigned
>000:29:0 0x8086 0x2482 A 0x00 9 0 already assigned
>000:29:1 0x8086 0x2484 B 0x03 9 0 already assigned
>pciintr_header_fixup: no entry for link 0x69 (2:5:0:A)
>pciintr_header_fixup: no entry for link 0x68 (2:8:0:A)
>------------------------------------------
>PCI fixup examining 8086:3575
>PCI fixup examining 8086:3577
>PCI fixup examining 8086:3577
>PCI fixup examining 8086:2482
>PCI fixup examining 8086:2484
>PCI fixup examining 8086:2487
>PCI fixup examining 8086:2448
>PCI fixup examining 104c:8023
>PCI fixup examining 1180:475
>PCI bridge 1: primary 1, secondary 2, subordinate 2
>PCI fixup examining 8086:1031
>PCI fixup examining 1260:3873
>PCI bridge 0: primary 0, secondary 1, subordinate 2
>PCI fixup examining 8086:248c
>PCI fixup examining 8086:248a
>PCI fixup examining 8086:2483
>PCI fixup examining 8086:2485
>PCI fixup examining 8086:2486
>PCI bus #2 is the last bus
>[System BIOS Setting]-----------------------
> device vendor product
> register space address size
>--------------------------------------------
>000:00:0 0x8086 0x3575
> [OK]
>000:02:0 0x8086 0x3577
> 10h mem 0xe8000000 0x08000000
> 14h mem 0xe0000000 0x00080000
> [OK]
>000:02:1 0x8086 0x3577
> 10h mem 0xf0000000 0x08000000
> 14h mem 0xe0080000 0x00080000
> [OK]
>000:29:0 0x8086 0x2482
> 20h port 0x00001800 0x00000020
> [OK]
>000:29:1 0x8086 0x2484
> 20h port 0x00001820 0x00000020
> [OK]
>000:29:2 0x8086 0x2487
> 20h port 0x00001840 0x00000020
> [OK]
>000:30:0 0x8086 0x2448
> [OK]
>000:31:0 0x8086 0x248c
> [OK]
>000:31:1 0x8086 0x248a
> 10h port 0x000001f0 0x00000008
> 14h port 0x000003f4 0x00000004
> 18h port 0x00000170 0x00000008
> 1ch port 0x00000374 0x00000004
> 20h port 0x00001860 0x00000010
> 24h mem 0xe0100000 0x00000400
> [OK]
>000:31:3 0x8086 0x2483
> 20h port 0x00001880 0x00000020
> [OK]
>000:31:5 0x8086 0x2485
> 10h port 0x00001c00 0x00000100
> 14h port 0x000018c0 0x00000040
> [OK]
>000:31:6 0x8086 0x2486
> 10h port 0x00002400 0x00000100
> 14h port 0x00002000 0x00000080
> [OK]
>001:02:0 0x104c 0x8023
> 10h mem 0xe0205000 0x00000800
> 14h mem 0xe0200000 0x00004000
> [OK]
>001:05:0 0x1180 0x0475
> 10h mem 0x00000000 0x00001000
> [NG]
>001:08:0 0x8086 0x1031
> 10h mem 0xe0204000 0x00001000
> 14h port 0x00003000 0x00000040
> [OK]
>001:11:0 0x1260 0x3873
> 10h mem 0xe0500000 0x00001000
> [OK]
>--------------------------[ 1 devices bogus]
> Physical memory end: 0x0fe7c000
> PCI memory mapped I/O space start: 0x0ff00000
>[PCIBIOS fixup stage]-----------------------
> device vendor product
> register space address size
>--------------------------------------------
>000:00:0 0x8086 0x3575
> [OK]
>000:02:0 0x8086 0x3577
> 10h mem 0xe8000000 0x08000000
> 14h mem 0xe0000000 0x00080000
> [OK]
>000:02:1 0x8086 0x3577
> 10h mem 0xf0000000 0x08000000
> 14h mem 0xe0080000 0x00080000
> [OK]
>000:29:0 0x8086 0x2482
> 20h port 0x00001800 0x00000020
> [OK]
>000:29:1 0x8086 0x2484
> 20h port 0x00001820 0x00000020
> [OK]
>000:29:2 0x8086 0x2487
> 20h port 0x00001840 0x00000020
> [OK]
>000:30:0 0x8086 0x2448
> [OK]
>000:31:0 0x8086 0x248c
> [OK]
>000:31:1 0x8086 0x248a
> 10h port 0x000001f0 0x00000008
> 14h port 0x000003f4 0x00000004
> 18h port 0x00000170 0x00000008
> 1ch port 0x00000374 0x00000004
> 20h port 0x00001860 0x00000010
> 24h mem 0xe0100000 0x00000400
> [OK]
>000:31:3 0x8086 0x2483
> 20h port 0x00001880 0x00000020
> [OK]
>000:31:5 0x8086 0x2485
> 10h port 0x00001c00 0x00000100
> 14h port 0x000018c0 0x00000040
> [OK]
>000:31:6 0x8086 0x2486
> 10h port 0x00002400 0x00000100
> 14h port 0x00002000 0x00000080
> [OK]
>001:02:0 0x104c 0x8023
> 10h mem 0xe0205000 0x00000800
> 14h mem 0xe0200000 0x00004000
> [OK]
>001:05:0 0x1180 0x0475
> 10h mem 0x0ff00000 0x00001000
> [OK]
>001:08:0 0x8086 0x1031
> 10h mem 0xe0204000 0x00001000
> 14h port 0x00003000 0x00000040
> [OK]
>001:11:0 0x1260 0x3873
> 10h mem 0xe0500000 0x00001000
> [OK]
>--------------------------[ 0 devices bogus]
>mainbus0 (root)
>pci0 at mainbus0 bus 0: configuration mode 1
>pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
>pchb0 at pci0 dev 0 function 0
>pchb0: Intel 82830MP CPU to I/O Bridge 1 (rev. 0x04)
>agp0 at pchb0: aperture at 0x0, size 0x8000000
>vga1 at pci0 dev 2 function 0: Intel 82830MP Integrated Video (rev. 0x04)
>wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
>wsmux1: connecting to wsdisplay0
>Intel 82830MP Integrated Video (miscellaneous display) at pci0 dev 2 function 1 not configured
>uhci0 at pci0 dev 29 function 0: Intel 82801CA/CAM USB Controller (rev. 0x02)
>uhci0: interrupting at irq 9
>usb0 at uhci0: USB revision 1.0
>uhub0 at usb0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1 at pci0 dev 29 function 1: Intel 82801CA/CAM USB Controller (rev. 0x02)
>uhci1: interrupting at irq 9
>usb1 at uhci1: USB revision 1.0
>uhub1 at usb1
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhci2 at pci0 dev 29 function 2: Intel 82801CA/CAM USB Controller (rev. 0x02)
>pci_intr_map: no mapping for pin C (line=ff)
>uhci2: couldn't map interrupt
>ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x42)
>pci1 at ppb0 bus 1
>pci1: i/o space, memory space enabled
>Texas Instruments product 0x8023 (Firewire serial bus, interface 0x10) at pci1 dev 2 function 0 not configured
>Ricoh 5C475 PCI-CardBus bridge (CardBus bridge, revision 0x80) at pci1 dev 5 function 0 not configured
>fxp0 at pci1 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
>fxp0: interrupting at irq 9
>fxp0: Ethernet address 08:00:46:77:e9:af
>ukphy0 at fxp0 phy 1: Generic IEEE 802.3u media interface
>ukphy0: i82562ET 10/100 media interface (OUI 0x005500, model 0x0033), rev. 0
>ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>wi0 at pci1 dev 11 function 0: Intersil Prism2.5 Wireless Lan
>pci_intr_map: no mapping for pin D (line=ff)
>wi0: couldn't map interrupt
>pcib0 at pci0 dev 31 function 0
>pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
>pciide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (rev. 0x02)
>pciide0: bus-master DMA support present
>pciide0: primary channel wired to compatibility mode
>wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
>wd0: drive supports 16-sector PIO transfers, LBA addressing
>wd0: 38154 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
>wd0: 32-bit data port
>wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
>pciide0: primary channel interrupting at irq 14
>wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
>pciide0: secondary channel wired to compatibility mode
>pciide0: disabling secondary channel (no drives)
>Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
>auich0 at pci0 dev 31 function 5: i82801CA AC-97 Audio
>auich0: interrupting at irq 9
>auich0: YMH3 codec; 18 bit DAC, no 3D stereo
>auich0: warning, fixed rate codec
>audio0 at auich0: full duplex, mmap, independent
>Intel 82801CA/CAM Modem (modem communications, revision 0x02) at pci0 dev 31 function 6 not configured
>isa0 at pcib0
>com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
>pckbc0 at isa0 port 0x60-0x64
>pckbd0 at pckbc0 (kbd slot)
>pckbc0: using irq 1 for kbd slot
>wskbd0 at pckbd0: console keyboard, using wsdisplay0
>pms0 at pckbc0 (aux slot)
>pckbc0: using irq 12 for aux slot
>wsmouse0 at pms0 mux 0
>lpt0 at isa0 port 0x378-0x37b irq 7
>pcppi0 at isa0 port 0x61
>midi0 at pcppi0: PC speaker
>sysbeep0 at pcppi0
>isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
>npx0 at isa0 port 0xf0-0xff: using exception 16
>fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
>pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
>pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
>pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
>pcmcia0 at pcic0 controller 0 socket 0
>isapnp0: no ISA Plug 'n Play devices found
>biomask ef6d netmask ef6d ttymask ffef
>pcic0: controller 0 detecting irqs with mask 0xdeb8: none
>pcic0: no available irq; polling for socket events
>Kernelized RAIDframe activated
>boot device: wd0
>root on wd0a dumps on wd0b
>root file system type: ffs
>wsdisplay0: screen 1 added (80x25, vt100 emulation)
>wsdisplay0: screen 2 added (80x25, vt100 emulation)
>wsdisplay0: screen 3 added (80x25, vt100 emulation)
>wsdisplay0: screen 4 added (80x25, vt100 emulation)
>
>