Subject: built-in wi on sony vaio
To: None <port-i386@netbsd.org>
From: Manuel Bouyer <bouyer@antioche.lip6.fr>
List: port-i386
Date: 03/26/2003 15:20:31
--6c2NcOVqGQ03X4Wi
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi,
I tried to get the build-in wireless interface on a sony vaio (model
PGC-R600HMDP) to work, without success. The bios doens't assign it an
interrupt, and the various pcibios options fails to allocate one too.
Attached is the message boot (from a 1.6.1_RC2 kernel with intel 830MP support
pulled up; I tried a current kernel with the same result).
It looks like the device doens't even appear in the messages from
PCIBIOS interrupt routines (but it appears in the IO/Mem PCIBIOS table).
Any idea ?
--
Manuel Bouyer, LIP6, Universite Paris VI. Manuel.Bouyer@lip6.fr
NetBSD: 24 ans d'experience feront toujours la difference
--
--6c2NcOVqGQ03X4Wi
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"
NetBSD 1.6.1_RC2 (GENRIC-manu) #3: Tue Mar 25 18:44:09 CET 2003
bouyer@pop:/local/pop1/bouyer/netbsd-1-6/src/sys/arch/i386/compile/GENRIC-manu
cpu0: Intel Pentium III (Tualatin) (686-class), 1193.17 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 512 KB 32b/line 8-way
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
total memory = 254 MB
avail memory = 229 MB
using 3277 buffers containing 13108 KB of memory
BIOS32 rev. 0 found at 0xfd871
PCI BIOS rev. 2.1 found at 0xfd9aa
pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
PCI IRQ Routing Table rev. 1.0 found at 0xfdf30, size 176 bytes (9 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
PIR Entry 0:
Bus: 0 Device: 30
INTA: link 0x00 bitmap 0xdef8
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 1:
Bus: 2 Device: 2
INTA: link 0x00 bitmap 0xdef8
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 2:
Bus: 2 Device: 5
INTA: link 0x69 bitmap 0x0008
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 3:
Bus: 2 Device: 8
INTA: link 0x68 bitmap 0x0200
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 4:
Bus: 0 Device: 0
INTA: link 0x00 bitmap 0xdef8
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 5:
Bus: 0 Device: 31
INTA: link 0x00 bitmap 0xdef8
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 6:
Bus: 0 Device: 29
INTA: link 0x60 bitmap 0x0200
INTB: link 0x63 bitmap 0x0200
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 7:
Bus: 0 Device: 2
INTA: link 0x60 bitmap 0x0200
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 8:
Bus: 0 Device: 1
INTA: link 0x60 bitmap 0x0200
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
pciintr_link_fixup: PIRQ 0x00 already connected to IRQ 9
pciintr_link_fixup: PIRQ 0x03 already connected to IRQ 9
pciintr_link_route: route of PIRQ 0x00 -> IRQ 9 preserved BIOS setting
pciintr_link_route: route of PIRQ 0x03 -> IRQ 9 preserved BIOS setting
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:02:0 0x8086 0x3577 A 0x00 9 0 already assigned
000:29:0 0x8086 0x2482 A 0x00 9 0 already assigned
000:29:1 0x8086 0x2484 B 0x03 9 0 already assigned
pciintr_header_fixup: no entry for link 0x69 (2:5:0:A)
pciintr_header_fixup: no entry for link 0x68 (2:8:0:A)
------------------------------------------
PCI fixup examining 8086:3575
PCI fixup examining 8086:3577
PCI fixup examining 8086:3577
PCI fixup examining 8086:2482
PCI fixup examining 8086:2484
PCI fixup examining 8086:2487
PCI fixup examining 8086:2448
PCI fixup examining 104c:8023
PCI fixup examining 1180:475
PCI bridge 1: primary 1, secondary 2, subordinate 2
PCI fixup examining 8086:1031
PCI fixup examining 1260:3873
PCI bridge 0: primary 0, secondary 1, subordinate 2
PCI fixup examining 8086:248c
PCI fixup examining 8086:248a
PCI fixup examining 8086:2483
PCI fixup examining 8086:2485
PCI fixup examining 8086:2486
PCI bus #2 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3575
[OK]
000:02:0 0x8086 0x3577
10h mem 0xe8000000 0x08000000
14h mem 0xe0000000 0x00080000
[OK]
000:02:1 0x8086 0x3577
10h mem 0xf0000000 0x08000000
14h mem 0xe0080000 0x00080000
[OK]
000:29:0 0x8086 0x2482
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x2484
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x2487
20h port 0x00001840 0x00000020
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x248c
[OK]
000:31:1 0x8086 0x248a
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x00001860 0x00000010
24h mem 0xe0100000 0x00000400
[OK]
000:31:3 0x8086 0x2483
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x2485
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
[OK]
000:31:6 0x8086 0x2486
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:02:0 0x104c 0x8023
10h mem 0xe0205000 0x00000800
14h mem 0xe0200000 0x00004000
[OK]
001:05:0 0x1180 0x0475
10h mem 0x00000000 0x00001000
[NG]
001:08:0 0x8086 0x1031
10h mem 0xe0204000 0x00001000
14h port 0x00003000 0x00000040
[OK]
001:11:0 0x1260 0x3873
10h mem 0xe0500000 0x00001000
[OK]
--------------------------[ 1 devices bogus]
Physical memory end: 0x0fe7c000
PCI memory mapped I/O space start: 0x0ff00000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3575
[OK]
000:02:0 0x8086 0x3577
10h mem 0xe8000000 0x08000000
14h mem 0xe0000000 0x00080000
[OK]
000:02:1 0x8086 0x3577
10h mem 0xf0000000 0x08000000
14h mem 0xe0080000 0x00080000
[OK]
000:29:0 0x8086 0x2482
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x2484
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x2487
20h port 0x00001840 0x00000020
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x248c
[OK]
000:31:1 0x8086 0x248a
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x00001860 0x00000010
24h mem 0xe0100000 0x00000400
[OK]
000:31:3 0x8086 0x2483
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x2485
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
[OK]
000:31:6 0x8086 0x2486
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:02:0 0x104c 0x8023
10h mem 0xe0205000 0x00000800
14h mem 0xe0200000 0x00004000
[OK]
001:05:0 0x1180 0x0475
10h mem 0x0ff00000 0x00001000
[OK]
001:08:0 0x8086 0x1031
10h mem 0xe0204000 0x00001000
14h port 0x00003000 0x00000040
[OK]
001:11:0 0x1260 0x3873
10h mem 0xe0500000 0x00001000
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82830MP CPU to I/O Bridge 1 (rev. 0x04)
agp0 at pchb0: aperture at 0x0, size 0x8000000
vga1 at pci0 dev 2 function 0: Intel 82830MP Integrated Video (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel 82830MP Integrated Video (miscellaneous display) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA/CAM USB Controller (rev. 0x02)
pci_intr_map: no mapping for pin C (line=ff)
uhci2: couldn't map interrupt
ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x42)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Texas Instruments product 0x8023 (Firewire serial bus, interface 0x10) at pci1 dev 2 function 0 not configured
Ricoh 5C475 PCI-CardBus bridge (CardBus bridge, revision 0x80) at pci1 dev 5 function 0 not configured
fxp0 at pci1 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
fxp0: interrupting at irq 9
fxp0: Ethernet address 08:00:46:77:e9:af
ukphy0 at fxp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: i82562ET 10/100 media interface (OUI 0x005500, model 0x0033), rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wi0 at pci1 dev 11 function 0: Intersil Prism2.5 Wireless Lan
pci_intr_map: no mapping for pin D (line=ff)
wi0: couldn't map interrupt
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
pciide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801CA AC-97 Audio
auich0: interrupting at irq 9
auich0: YMH3 codec; 18 bit DAC, no 3D stereo
auich0: warning, fixed rate codec
audio0 at auich0: full duplex, mmap, independent
Intel 82801CA/CAM Modem (modem communications, revision 0x02) at pci0 dev 31 function 6 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
isapnp0: no ISA Plug 'n Play devices found
biomask ef6d netmask ef6d ttymask ffef
pcic0: controller 0 detecting irqs with mask 0xdeb8: none
pcic0: no available irq; polling for socket events
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
--6c2NcOVqGQ03X4Wi--