1.6.1-\epsilon can't reboot on an Athlon 1200.  IIRC 1.5.3-4 worked
ok.  I had chalked this up to athlon differences, and not gotten
around to figuring this out.

This machine is on a Belkin keyboard/monitor switch, which seems to
work ok.

This machine has another problem, which is that the CD loses after
reading a few blocks.  4 machines behave the same.  I had hoped the
better PCIIDE support for the M5229 in 1.6 would fix this, but it
seems to behave the same as 1.5.x.  I doubt these the CD issue is
related, but I thought I'd mention it.

        Greg Troxel <gdt@ir.bbn.com>

NetBSD 1.6.1_RC1 (FOOCVS) #2: Tue Feb 18 17:13:24 EST 2003
    root@foo:/usr/home/gdt/FOO-current/netbsd/src/sys/arch/i386/compile/FOOCVS
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 1208.91 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 511 MB
avail memory = 470 MB
using 6144 buffers containing 26292 KB of memory
BIOS32 rev. 0 found at 0xf0f70
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Acer Labs product 0x1647 (rev. 0x04)
agp0 at pchb0: aperture at 0xf0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: Acer Labs product 0x5247 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Rage XL (AGP) (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ohci0 at pci0 dev 2 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci0: interrupting at irq 9
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pciide0 at pci0 dev 4 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <ST320011A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19092 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <SONY CD-RW CRX1611, , TYS3> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
ohci1 at pci0 dev 6 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci1: interrupting at irq 9
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
ppb1 at pci0 dev 10 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
tlp0 at pci2 dev 4 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at irq 10
tlp0: Ethernet address
nsphyter0 at tlp0 phy 1: DP83843 10/100 media interface, rev. 0
nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp1 at pci2 dev 5 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at irq 5
tlp1: Ethernet address
nsphyter1 at tlp1 phy 1: DP83843 10/100 media interface, rev. 0
nsphyter1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp2 at pci2 dev 6 function 0: DECchip 21143 Ethernet, pass 4.1
tlp2: interrupting at irq 9
tlp2: Ethernet address
nsphyter2 at tlp2 phy 1: DP83843 10/100 media interface, rev. 0
nsphyter2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp3 at pci2 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp3: interrupting at irq 11
tlp3: Ethernet address
nsphyter3 at tlp3 phy 1: DP83843 10/100 media interface, rev. 0
nsphyter3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 17 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask e345 netmask ef65 ttymask ffe7
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: v3.4.29 initialized.  Default = block all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)