This is a multi-part message in MIME format.
--------------080503050003050004050909
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Hello,
my hardware is Intel SE7500CW2 + 2x iXeon/2GHz + Adaptec RAID 3210S.
Software NetBSD 1.6 latest source from cvs.
I would like to use SMP kernel with MPACPI because there is HTT support.
The problem is when kernel wants detect disks attached to the controller:

iop0: configuring...
iop0: unable to retrieve HRT
Kernelized RAIDframe activated
boot device: <unknown>
root device:

The whole dmesg is in attachment.
When I use MPBIOS kernel then everything's alright:

iop0: configuring...
dpti0 at iop0 tid 0: DPT/Adaptec RAID management interface
ld0 at iop0 tid 518: <FUJITSU, MAN3184MC, 0109> direct access, fixed
ld0: 17522 MB, 8900 cyl, 64 head, 63 sec, 512 bytes/sect x 35885431 sectors
ld1 at iop0 tid 519: <FUJITSU, MAN3184MC, 0109> direct access, fixed
ld1: 17522 MB, 8900 cyl, 64 head, 63 sec, 512 bytes/sect x 35885431 sectors
iopsp0 at iop0 tid 8: SCSI port <ADAPTEC, AIC-7899, 00000001>
iopsp0: 16-bit, max sync rate 80MHz, initiator ID 7
iopsp0: target 0 (tid 513): 16-bit, synchronous at 78MHz, offset 0x7e
iopsp0: target 0,0 (tid 513): in use by tid 518
iopsp0: target 1 (tid 514): 16-bit, synchronous at 78MHz, offset 0x7e
iopsp0: target 1,0 (tid 514): in use by tid 519
iopsp0: target 6 (tid 515): 8-bit, asynchronous
scsibus0 at iopsp0: 16 targets, 8 luns per target
iopsp1 at iop0 tid 9: SCSI port <ADAPTEC, AIC-7899, 00000001>
iopsp1: 16-bit, max sync rate 80MHz, initiator ID 7
scsibus1 at iopsp1: 16 targets, 8 luns per target
Kernelized RAIDframe activated
ses0 at scsibus0 target 6 lun 0: <ESG-SHV, SCA HSBP M15, 0.08> processor 
fixed
ses0: SAF-TE Compliant Device
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs


I'll be grateful for any suggestions.

Thanks.

Vasek Musil.

--------------080503050003050004050909
Content-Type: text/plain;
 name="INTELmpACPI.dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="INTELmpACPI.dmesg"

NetBSD 1.6N (INTELmpACPI-$Revision: 1.545 $) #0: Sun Feb  9 19:02:20 CET 2003
    root@intel:/usr/src/sys/arch/i386/compile/INTELmpACPI
total memory = 1023 MB
avail memory = 942 MB
using 6144 buffers containing 52480 KB of memory
BIOS32 rev. 0 found at 0xfd7f0
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium 4 (686-class), 1993.67 MHz, id 0xf24
cpu0: features 3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 3febfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features 3febfbff<FXSR,SSE,SSE2,SS,HTT,TM>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 512 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 16 page colors
cpu0: kstack at 0xe3633000 for 16384 bytes
cpu0: idle pcb at 0xe3633000, idle sp at 0xe3636f98
cpu1 at mainbus0: apid 6 (application processor)
cpu1: starting
cpu1: Intel Pentium 4 (686-class), 1993.54 MHz, id 0xf24
cpu1: features 3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 3febfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features 3febfbff<FXSR,SSE,SSE2,SS,HTT,TM>
cpu1: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu1: L2 cache 512 KB 64b/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
cpu1: kstack at 0xe363f000 for 16384 bytes
cpu1: idle pcb at 0xe363f000, idle sp at 0xe3642f98
cpu2 at mainbus0: apid 1 (application processor)
cpu2: starting
cpu2: Intel Pentium 4 (686-class), 1993.54 MHz, id 0xf24
cpu2: features 3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features 3febfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu2: features 3febfbff<FXSR,SSE,SSE2,SS,HTT,TM>
cpu2: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu2: L2 cache 512 KB 64b/line 8-way
cpu2: ITLB 4K/4M: 64 entries
cpu2: DTLB 4K/4M: 64 entries
cpu2: kstack at 0xe365b000 for 16384 bytes
cpu2: idle pcb at 0xe365b000, idle sp at 0xe365ef98
cpu3 at mainbus0: apid 7 (application processor)
cpu3: starting
cpu3: Intel Pentium 4 (686-class), 1993.54 MHz, id 0xf24
cpu3: features 3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features 3febfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu3: features 3febfbff<FXSR,SSE,SSE2,SS,HTT,TM>
cpu3: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu3: L2 cache 512 KB 64b/line 8-way
cpu3: ITLB 4K/4M: 64 entries
cpu3: DTLB 4K/4M: 64 entries
cpu3: kstack at 0xe3677000 for 16384 bytes
cpu3: idle pcb at 0xe3677000, idle sp at 0xe367af98
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 20, 24 pins
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xfec80000, virtual wire mode, version 20, 24 pins
ioapic2 at mainbus0 apid 4 (I/O APIC)
ioapic2: pa 0xfec80400, virtual wire mode, version 20, 24 pins
acpi0 at mainbus0
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
    ACPI-0233: *** Info: There are no GPE blocks defined in the FADT
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus at level 2
mpacpi: found subordinate bus at level 3
mpacpi: found subordinate bus at level 3
mpacpi: 4 PCI busses
mpacpi: found subordinate PCI bus 5
mpacpi: no parent bus at level 3
mpacpi: no parent bus at level 3
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 5 int routing
mpacpi: configuring PCI bus -1 int routing
mpacpi: configuring PCI bus -1 int routing
ioapic2: int2 attached to isa0 irq 0 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic2: int1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int9 attached to isa0 irq 9 (type 0<type=0> flags d<pol=1=Act Hi,trig=3=Level>)
ioapic2: int10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic2: int15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic2: int18 attached to pci0 device 31 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int17 attached to pci0 device 31 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int16 attached to pci0 device 29 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int19 attached to pci0 device 29 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int18 attached to pci0 device 29 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int17 attached to pci5 device 1 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int18 attached to pci5 device 1 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int17 attached to pci5 device 1 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int18 attached to pci5 device 1 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int19 attached to pci5 device 2 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int16 attached to pci5 device 2 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int19 attached to pci5 device 2 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int16 attached to pci5 device 2 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int21 attached to pci5 device 3 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int20 attached to pci5 device 4 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int23 attached to pci5 device 5 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: int22 attached to pci5 device 6 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
INT0800 at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0A06 [Generic ACPI Extended-IO Bus (EIO bus)] at acpi0 not configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured
PNP0C0C [ACPI power button device] at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel E7500 MCH Host (rev. 0x02)
Intel E7500 MCH DRAM Controller (undefined subclass 0x00, revision 0x02) at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0: Intel E7500 MCH HI_B vppb 1 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 1 function 0: Distributed Processing Technology PCI-PCI Bridge (rev. 0x01)
pci3 at ppb2 bus 3
pci3: memory space enabled
iop0 at pci2 dev 1 function 1: I2O adapter <ADAPTEC 3210S>
iop0: interrupting at apic 4 int 12 (irq 12)
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci1 dev 30 function 0 not configured
ppb3 at pci1 dev 31 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
wm0 at pci4 dev 1 function 0: Intel i82544EI 1000BASE-T Ethernet, rev. 2
wm0: interrupting at apic 4 int 12 (irq 12)
wm0: Ethernet address 00:02:b3:aa:51:d5
makphy0 at wm0 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0x42)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
vga1 at pci5 dev 3 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
fxp0 at pci5 dev 4 function 0: i82550 Ethernet, rev 13
fxp0: interrupting at apic 4 int 20 (irq 12)
fxp0: Ethernet address 00:02:b3:b0:bf:f4
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CA LPC Interface (rev. 0x02)
pciide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 0: <SONY CD-ROM CDU5221, , 0.35> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: primary channel interrupting at irq 14
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 300c0<vector=c0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic2: enabling
ioapic2: int1 190<vector=90,delmode=1,dest=0> 0<target=0>
ioapic2: int3 1d3<vector=d3,delmode=1,dest=0> 0<target=0>
ioapic2: int4 1d1<vector=d1,delmode=1,dest=0> 0<target=0>
ioapic2: int6 162<vector=62,delmode=1,dest=0> 0<target=0>
ioapic2: int9 a1d0<vector=d0,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic2: int12 a160<vector=60,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic2: int14 161<vector=61,delmode=1,dest=0> 0<target=0>
ioapic2: int20 a170<vector=70,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic1: enabling
ioapic0: enabling
iop0: configuring...
iop0: unable to retrieve HRT
Kernelized RAIDframe activated
boot device: <unknown>
root device: 


--------------080503050003050004050909--