------- =_aaaaaaaaaa0
Content-Type: text/plain; charset="us-ascii"
Content-ID: <305.1040267997.1@capo.xnet.duzan.org>

   I recently replaced the motherboard on my -current box with a
Leadtek one with the nForce2 chipset. A number of things aren't
working, as one might expect from new hardware, but the main problem
at the moment is that when I fire up X, as soon as I move the mouse,
the keyboard locks up, and I get these messages:

===========================================================================
Dec 18 21:36:26 capo /netbsd: pckbc: command timeout
Dec 18 21:36:26 capo /netbsd: pms_enable: command error 35
Dec 18 21:36:27 capo /netbsd: pckbc: command timeout
Dec 18 21:36:28 capo /netbsd: pckbc: command timeout
Dec 18 21:36:28 capo /netbsd: pms_disable: command error
Dec 18 21:36:30 capo /netbsd: pckbc: command timeout
Dec 18 21:36:30 capo /netbsd: pms_enable: command error 35
===========================================================================

   Any ideas about what is going on or how to fix it? I've already
disabled all the unused devices in the BIOS. A dmesg.boot is
attached.
   Thanks.

					Gary Duzan



------- =_aaaaaaaaaa0
Content-Type: text/plain; name="dmesg.boot"; charset="us-ascii"
Content-ID: <305.1040267997.2@capo.xnet.duzan.org>
Content-Description: dmesg.boot

NetBSD 1.6K (CAPO) #0: Tue Dec 17 23:01:11 EST 2002
    gary@capo:/usr2/tmp/current/src/obj/sys/arch/i386/compile/CAPO
total memory = 511 MB
avail memory = 420 MB
using 6144 buffers containing 78540 KB of memory
BIOS32 rev. 0 found at 0xfb390
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP 2100+ (686-class), 1737.36 MHz, id 0x662
cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Nvidia Corporation product 0x01e0 (rev. 0xa2)
agp at pchb0 not configured
Nvidia Corporation product 0x01eb (RAM memory, revision 0xa2) at pci0 dev 0 function 1 not configured
Nvidia Corporation product 0x01ee (RAM memory, revision 0xa2) at pci0 dev 0 function 2 not configured
Nvidia Corporation product 0x01ed (RAM memory, revision 0xa2) at pci0 dev 0 function 3 not configured
Nvidia Corporation product 0x01ec (RAM memory, revision 0xa2) at pci0 dev 0 function 4 not configured
Nvidia Corporation product 0x01ef (RAM memory, revision 0xa2) at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0
pcib0: Nvidia Corporation product 0x0060 (rev. 0xa3)
Nvidia Corporation product 0x0064 (SMBus serial bus, revision 0xa2) at pci0 dev 1 function 1 not configured
ppb0 at pci0 dev 8 function 0: Nvidia Corporation product 0x006c (rev. 0xa3)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 6 function 0: ATI Technologies 3D Rage Pro (rev. 0x5c)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
rtk0 at pci1 dev 8 function 0: D-Link Systems DFE 530TX+
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:50:ba:60:0e:19
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pciide0 at pci0 dev 9 function 0: Nvidia Corporation product 0x0065 (rev. 0xa2)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel interrupting at irq 14
wd0 at pciide0 channel 0 drive 0: <ST320423A>
wd0: drive supports 32-sector PIO transfers, LBA addressing
wd0: 19536 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel interrupting at irq 15
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <SONY CD-ROM CDU4821, MT1198-B Firmware, S0.Q> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd1 at pciide0 channel 1 drive 1: <MAXTOR 6L080L4>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 76345 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
ppb1 at pci0 dev 30 function 0: Nvidia Corporation product 0x01e8 (rev. 0xa2)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2 (slowidle)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)

------- =_aaaaaaaaaa0--