-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


pciide0 at pci0 dev 7 function 1: Advanced Micro Devices AMD768 IDE Controller (
rev. 0x04)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IC35L080AVVA07-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 78533 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data
 transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <SONY CDU4811, , PY0A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data 
transfers)
pciide1 at pci2 dev 4 function 0: Promise Ultra133/ATA Bus Master IDE Accelerato
r (rev. 0x02)
pciide1: bus-master DMA support present
pciide1: primary channel configured to native-PCI mode
pciide1: using apic 2 int 9 (irq 9) for native-PCI interrupt
wd1 at pciide1 channel 0 drive 0: <Maxtor 6Y060L0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 58644 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 120103200 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (using DMA data transfers)
pciide1: secondary channel configured to native-PCI mode
wd2 at pciide1 channel 1 drive 0: <Maxtor 6Y060L0>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 58644 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 120103200 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (using DMA data transfers)
ex0 at pci2 dev 8 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x
78)

Sean Davis <dive@endersgame.net> writes:

> On Tue, Dec 10, 2002 at 11:47:32AM -0800, Michael Graff wrote:
> > When I pound on the hard drives (IDE in this case) I get lockups.
> > This seems only to occur when using ccd on two IDE disks in my
> > semi-production box.  Grr.  :)  ddb does not respond.
> > 
> You aren't by any chance using a motherboard with an HPT366 ATA66 controller for
> the hard drives, are you? The HPT366 onboard the Abit BE6-2 (and others, i
> presume) is buggy - lots of activity on both channels will hang the machine
> completely. I was bitten by this, and ended up having to buy a PCI ide
> controller.
> 
> -Sean
> 
> -- 
> /~\ The ASCII
> \ / Ribbon Campaign                   Sean Davis
>  X  Against HTML                       aka dive
> / \ Email!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (NetBSD)
Comment: See http://www.flame.org/~explorer/pgp for my keys

iD8DBQE99nXrl6Nz7kJWYWYRAmBjAJ90t9B3+s5nqh81op0XDCGlrFGZvgCeLu73
e6w/qfDTACH8bs90YTflVn4=
=/Sl1
-----END PGP SIGNATURE-----