Do you have

pseudo-device	ccd		4

in your kernel config? Must not be commented out.

Jaromir

Juan RP wrote:
[ Charset ISO-8859-1 unsupported, converting... ]
> Hello, im building a concatenated disk driver in my second HD, the disklabel 
> wd1 print this:
> 
>  #        size    offset     fstype  [fsize bsize cpg/sgs]
>  a:  40960000         0        ccd                      # (Cyl.    0 - 40634*)
>  b:   40960000  40960000   ccd                      # (Cyl. 40634*-81269*)
>  c: 117231408         0   unused      0     0         # (Cyl.    0 - 116300)
>  d: 117231408         0   unused      0     0         # (Cyl.    0 - 116300)
>  e:  35311408  81920000    ccd                      # (Cyl. 81269*- 116300)
> 
> I have in my kernel pseudo-device ccd 4 too, in /etc/ccd.conf i have this:
> 
> ccd0    16      none    /dev/ccd1a /dev/ccd1b /dev/ccd1e
> 
> When i try to configure the ccd0, see this error:
> 
> root@xtraeme.dyndns.org#~>>ccdconfig -v -C  
> ccdconfig: ioctl (CCDIOCSET): /dev/ccd0d: Device not configured
> root@xtraeme.dyndns.org#~>>
> 
> Which is the error ? many thanks *
> 
> wd1 at pciide0 channel 0 drive 1: <ST360020A>
> wd1: drive supports 16-sector PIO transfers, LBA addressing
> wd1: 57241 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors
> wd1: 32-bit data port
> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA 
> data transfers)
> 
> --
> Juan RP ( Barcelona, Spain )
> jrp@hispabsd.org || juan@xtraeme.dyndns.org
> http://www.HispaBSD.org
> Public gpg key at  http://www.HispaBSD.org/gpg/jrp.asc
> --
> 


-- 
Jaromir Dolecek <jdolecek@NetBSD.org>            http://www.NetBSD.org/
-=- We should be mindful of the potential goal, but as the tantric    -=-
-=- Buddhist masters say, ``You may notice during meditation that you -=-
-=- sometimes levitate or glow.   Do not let this distract you.''     -=-