Subject: Re: cbb/pcic not getting an interrupt configured...
To: Lennart Augustsson <lennart@augustsson.net>
From: john heasley <heas@shrubbery.net>
List: port-i386
Date: 11/03/2002 14:42:44
Sun, Nov 03, 2002 at 10:52:43AM +0100, Lennart Augustsson:
> In some modern machine the BIOS code for PCIBIOS seems to be broken.
> Presumably this is because Windoze uses ACPI these days. I couldn't get
> interrupts to work on my Sony SRX77 until I used ACPI to fix them up.
> Now, our ACPI support is less than stellar so I can't suspend&resume. :(
> But it's now worse than with APM, because the APM support in BIOS was
> broken too. :(
>
> -- Lennart
i've been have similar problems with a tyan mpx board. with acpi,
the cardbus now gets an interrupt and the pcmcia at cardbus gets
configured, but the lucent wavelan still doesnt work. [ see this msg
reminded me to ask here, as suggested on current-users. ]
see exerpts below
> Peter Seebach wrote:
>
> >So, I'm trying to debug my mom's laptop... And I still can't get
> >the @#!$ thing to use etiher cbb or pcic interfaces. In both cases,
> >the driver refuses to attach to the device, claiming that the
> >interrupt is not configured. (Rather, the pcic just aborts and
> >says "not configured"; cbb says "unconfigured interrupt".) I've
> >tried nearly every combination of the PCIBIOS options, and nothing
> >happens; no change at all, it just plain doesn't think it has an
> >interrupt. Is this extra-tough because cbb/pcic devices need to
> >do some extra magic to handle interrupts from devices in them or
> >something?
> >
> >Anyway, any advice would be appreciated. Both drivers just plain refuse to
> >attach, and as such, no pcmcia or cardbus cards can be used - an annoyance at
> >the best of times.
> >
> >I can arrange for arbitrarily verbose boot messages, but I think the situation
> >can be summed up with "VIA chipset, BIOS has no useful settings". If anyone
> >else has seen similar problems and eventually beaten them, I'd love to know
> >about it.
> >
> >-s
Date: Thu, 31 Oct 2002 15:52:58 -0800
To: current-users@netbsd.org
Subject: cbb interrupt problem with tyan-mpx
i'm having trouble getting a pci cbb to work in the Tyan-MPX i bought
(for SMP experimentation). it worked in the previous asus board. i'm
not too keen on pc hardware and after trying various BIOS knobs, i must
ask for help/suggestions/clue.
the pci cbb is the one that lucent sells to service a wavelan card. in
the tyan board it claims to have difficulty finding an interrupt (no idea
what cbb1 is).
cbb0 at pci2 dev 7 function 0: Texas Instruments PCI1225 PCI-CardBus Bridge (rev. 0x01)
cbb0: NOT USED because of unconfigured interrupt
cbb1 at pci2 dev 7 function 1: Texas Instruments PCI1225 PCI-CardBus Bridge (rev. 0x01)
cbb1: NOT USED because of unconfigured interrupt
in the asus board it looked like:
cbb0 at pci0 dev 12 function 0: Texas Instruments PCI1225 PCI-CardBus Bridge (rev. 0x01)
Texas Instruments PCI1225 PCI-CardBus Bridge (CardBus bridge, revision 0x01) at pci0 dev 12 function 1 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 0 device 0
pcmcia0 at cardslot0
wi0 at pcmcia0 function 0: Lucent Technologies, WaveLAN/IEEE, Version 01.01
wi0: 802.11 address 00:02:2d:01:b1:a2
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (6.6.1)
wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
pccbb_intr_disestablish: pil 0xc0a5b9e0
...
To: Jolan Luff <jolan@encryptedemail.net>
Cc: current-users@netbsd.org
Subject: Re: cbb interrupt problem with tyan-mpx
Thu, Oct 31, 2002 at 06:17:07PM -0600, Jolan Luff:
> you might want to try turning on pcibios and apic code with
> verbosity to help track down what exactly is going on.
with FIXUP (and FIXUP_FORCE) turned on, it seems to fix what appears
to be a bad address (devices 6 and 7 [newer and original versions of
the card]). but, no love. the cardbus memory regions are still 0x0.
...
adding acpi (is there more info on exactly what this chip is supposed to
do - i'm rather lost), near success, but the wavlan doesnt get configured
or even noticed. presumably related to "cbb0: bad Vcc request.", whatever
that means.
advice?
Texas Instruments PCI1225 PCI-CardBus Bridge (CardBus bridge, revision 0x01) at ? dev 4 function 0 (tag 0x80022000, intrtag 0x80008000, intrswiz 0x4, intrpin 0x1, i/o on, mem on, no quirks): Texas Instruments PCI1225 PCI-CardBus Bridge (rev. 0x01) (chipflags 3)
cbb0: socket base address 0x20000000
cbb0: intrpin A, intrtag 11
CardBus latency timer 0x20 (20030302)
PCI latency timer 0x10 (821000)
pccbb_power: CARDBUS_VCC_0V and CARDBUS_VPP_0V [44]
cbb0: bad Vcc request. sock_ctrl 0xffffff88, sock_status 0xffffffff
pccbb_power: CARDBUS_VCC_0V and CARDBUS_VPP_0V [44]
pci_intr_map: bus 2 dev 4 func 0 pin 1; line 11
pci_intr_map: no MP mapping found
isa_intr_establish: no MP mapping found
cbb0: interrupting at irq 11
PCI config regs:
0x00: ac1c104c 02100007 06070001 00821000
0x10: 20000000 020000a0 20030302 fffff000
0x20: 00000000 fffff000 00000000 fffffffc
0x30: 00000000 fffffffc 00000000 07c0010b
0x40: 2023133f 00000001 00000000 00000000
0x80: 28649060 00000000 00000000 0cc07d92
0x90: 606000c0 00000000 00000000 00000000
0xa0: 7e210001 00800000 0000000e 0000000b
socket regs: ffffffff ffffffff ffffffff ffffffff ffffffff
ExCA regs: ff ff ff ff ff ff ff ff
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
pccbb_pcmcia_card_detect
pccbbattach: found cardslot
NetBSD 1.6K (nigmp) #0: Sat Nov 2 04:44:04 GMT 2002
root@ni:/home/src/sys/arch/i386/compile/nigmp
total memory = 511 MB
avail memory = 470 MB
using 6144 buffers containing 26268 KB of memory
BIOS32 rev. 0 found at 0xfd6b0
PCI BIOS rev. 2.1 found at 0xfd7d0
pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
PCI IRQ Routing Table rev. 1.0 found at 0xfdef0, size 0 bytes (-2 entries)
pcibios_pir_init: bad IRQ table size
PCI BIOS has 13 Interrupt Routing table entries
PIR Entry 0:
Bus: 0 Device: 8
INTA: link 0x01 bitmap 0xdef8
INTB: link 0x02 bitmap 0xdef8
INTC: link 0x03 bitmap 0xdef8
INTD: link 0x04 bitmap 0xdef8
PIR Entry 1:
Bus: 0 Device: 9
INTA: link 0x02 bitmap 0xdef8
INTB: link 0x03 bitmap 0xdef8
INTC: link 0x04 bitmap 0xdef8
INTD: link 0x01 bitmap 0xdef8
PIR Entry 2:
Bus: 0 Device: 10
INTA: link 0x03 bitmap 0xdef8
INTB: link 0x04 bitmap 0xdef8
INTC: link 0x01 bitmap 0xdef8
INTD: link 0x02 bitmap 0xdef8
PIR Entry 3:
Bus: 0 Device: 0
INTA: link 0x00 bitmap 0xdef8
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 4:
Bus: 0 Device: 1
INTA: link 0x02 bitmap 0xdef8
INTB: link 0x03 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 5:
Bus: 1 Device: 5
INTA: link 0x03 bitmap 0xdef8
INTB: link 0x04 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 6:
Bus: 0 Device: 16
INTA: link 0x02 bitmap 0xdef8
INTB: link 0x03 bitmap 0xdef8
INTC: link 0x04 bitmap 0xdef8
INTD: link 0x01 bitmap 0xdef8
PIR Entry 7:
Bus: 2 Device: 4
INTA: link 0x01 bitmap 0xdef8
INTB: link 0x02 bitmap 0xdef8
INTC: link 0x03 bitmap 0xdef8
INTD: link 0x04 bitmap 0xdef8
PIR Entry 8:
Bus: 2 Device: 5
INTA: link 0x02 bitmap 0xdef8
INTB: link 0x03 bitmap 0xdef8
INTC: link 0x04 bitmap 0xdef8
INTD: link 0x01 bitmap 0xdef8
PIR Entry 9:
Bus: 2 Device: 6
INTA: link 0x03 bitmap 0xdef8
INTB: link 0x04 bitmap 0xdef8
INTC: link 0x01 bitmap 0xdef8
INTD: link 0x02 bitmap 0xdef8
PIR Entry 10:
Bus: 2 Device: 7
INTA: link 0x04 bitmap 0xdef8
INTB: link 0x01 bitmap 0xdef8
INTC: link 0x02 bitmap 0xdef8
INTD: link 0x03 bitmap 0xdef8
PIR Entry 11:
Bus: 2 Device: 0
INTA: link 0x00 bitmap 0xdef8
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x04 bitmap 0xdef8
PIR Entry 12:
Bus: 2 Device: 8
INTA: link 0x04 bitmap 0xdef8
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
pci_intr_fixup: no compatible PCI ICU found
Warning: unable to fix up PCI interrupt routing
PCI fixup examining 1022:700c
PCI fixup examining 1022:700d
PCI fixup examining 1002:4742
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 1022:7440
PCI fixup examining 1022:7441
PCI fixup examining 1022:7443
PCI fixup examining 1022:7448
PCI fixup examining 1022:7449
PCI fixup examining 104c:ac1c
PCI bridge 2: primary 2, secondary 3, subordinate 3
PCI fixup examining 104c:ac1c
PCI bridge 3: primary 2, secondary 4, subordinate 4
PCI fixup examining 1000:01
PCI fixup examining 8086:1229
PCI fixup examining 8086:1229
PCI fixup examining 10b7:9200
PCI bridge 1: primary 0, secondary 2, subordinate 4
PCI bus #4 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x1022 0x700c
10h mem 0xfc000000 0x02000000
14h mem 0xfa500000 0x00001000
18h port 0x00001010 0x00000004
[OK]
000:01:0 0x1022 0x700d
[OK]
000:07:0 0x1022 0x7440
[OK]
000:07:1 0x1022 0x7441
20h port 0x0000f000 0x00000010
[OK]
000:07:3 0x1022 0x7443
[OK]
000:16:0 0x1022 0x7448
[OK]
001:05:0 0x1002 0x4742
10h mem 0xf9000000 0x01000000
14h port 0x00002000 0x00000100
18h mem 0xf8000000 0x00001000
[OK]
002:00:0 0x1022 0x7449
10h mem 0xfa200000 0x00001000
[OK]
002:04:0 0x104c 0xac1c
10h mem 0x00000000 0x00001000
[NG]
002:04:1 0x104c 0xac1c
10h mem 0x00000000 0x00001000
[NG]
002:05:0 0x1000 0x0001
10h port 0x00003000 0x00000100
14h mem 0xfa202000 0x00000100
[OK]
002:06:0 0x8086 0x1229
10h mem 0xfa201000 0x00001000
14h port 0x00003480 0x00000040
18h mem 0xfa000000 0x00100000
[OK]
002:07:0 0x8086 0x1229
10h mem 0xfa600000 0x00001000
14h port 0x000034c0 0x00000020
18h mem 0xfa100000 0x00100000
[OK]
002:08:0 0x10b7 0x9200
10h port 0x00003400 0x00000080
14h mem 0xfa202400 0x00000080
[OK]
--------------------------[ 2 devices bogus]
Physical memory end: 0x1ff60000
PCI memory mapped I/O space start: 0x20000000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x1022 0x700c
10h mem 0xfc000000 0x02000000
14h mem 0xfa500000 0x00001000
18h port 0x00001010 0x00000004
[OK]
000:01:0 0x1022 0x700d
[OK]
000:07:0 0x1022 0x7440
[OK]
000:07:1 0x1022 0x7441
20h port 0x0000f000 0x00000010
[OK]
000:07:3 0x1022 0x7443
[OK]
000:16:0 0x1022 0x7448
[OK]
001:05:0 0x1002 0x4742
10h mem 0xf9000000 0x01000000
14h port 0x00002000 0x00000100
18h mem 0xf8000000 0x00001000
[OK]
002:00:0 0x1022 0x7449
10h mem 0xfa200000 0x00001000
[OK]
002:04:0 0x104c 0xac1c
10h mem 0x20000000 0x00001000
[OK]
002:04:1 0x104c 0xac1c
10h mem 0x20001000 0x00001000
[OK]
002:05:0 0x1000 0x0001
10h port 0x00003000 0x00000100
14h mem 0xfa202000 0x00000100
[OK]
002:06:0 0x8086 0x1229
10h mem 0xfa201000 0x00001000
14h port 0x00003480 0x00000040
18h mem 0xfa000000 0x00100000
[OK]
002:07:0 0x8086 0x1229
10h mem 0xfa600000 0x00001000
14h port 0x000034c0 0x00000020
18h mem 0xfa100000 0x00100000
[OK]
002:08:0 0x10b7 0x9200
10h port 0x00003400 0x00000080
14h mem 0xfa202400 0x00000080
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0x9f400 to 0x9f7f0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf7170
mainbus0: MP config table at 0x9fd90, 292 bytes long
mainbus0: Intel MP Specification (Version 1.4) (TYAN PAULANER )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: AMD Athlon (686-class), 1200.11 MHz
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 266 MHz
cpu0: 8 page colors
cpu0: kstack at 0xe29a7000 for 16384 bytes
cpu0: idle pcb at 0xe29a7000, idle sp at 0xe29aaf98
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: AMD Athlon (686-class), 1200.05 MHz
cpu1: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu1: features 383fbff<FXSR,SSE>
cpu1: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu1: L2 cache 256 KB 64b/line 16-way
cpu1: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu1: kstack at 0xe29b3000 for 16384 bytes
cpu1: idle pcb at 0xe29b3000, idle sp at 0xe29b6f98
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 11, 24 pins
ioapic0: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int1 attached to isa0 irq 1 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int2 attached to isa0 irq 0 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int3 attached to isa0 irq 3 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int4 attached to isa0 irq 4 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int17 attached to pci2 device 5 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int6 attached to isa0 irq 6 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int7 attached to isa0 irq 7 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int8 attached to isa0 irq 8 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int9 attached to isa0 irq 9 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int19 attached to pci2 device 0 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int18 attached to pci1 device 5 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int12 attached to isa0 irq 12 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int13 attached to isa0 irq 13 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int14 attached to isa0 irq 14 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int15 attached to isa0 irq 15 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int18 attached to pci2 device 6 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int19 attached to pci2 device 7 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int19 attached to pci2 device 8 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
local apic: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 5<pol=1=Act Hi,trig=1=Edge>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 5<pol=1=Act Hi,trig=1=Edge>)
mainbus0: MP WARNING: 324 bytes of extended entries not examined
acpi0 at mainbus0
acpi0: SCI interrupting at irq 9
acpi0: fixed-feature power button present
acpi0: fixed-feature sleep button present
acpibut0 at acpi0: ACPI Power Button
PNP0C01 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0303 at acpi0 not configured
PNP0A05 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0401 at acpi0 not configured
PNP0700 at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: PCI configuration registers:
Common header:
0x00: 0x700c1022 0x22300006 0x06000011 0x00004000
Vendor Name: Advanced Micro Devices (0x1022)
Device Name: AMD762 NorthBridge (0x700c)
Command register: 0x0006
I/O space accesses: off
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x2230
Capability List support: on
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: on
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: host (0x00)
Interface: 0x00
Revision ID: 0x11
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0xfc000008 0xfa500008 0x00001011 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x000000a0 0x00000000 0x00000000
Base address register at 0x10
type: 32-bit prefetchable memory
base: 0xfc000000, not sized
Base address register at 0x14
type: 32-bit prefetchable memory
base: 0xfa500000, not sized
Base address register at 0x18
type: i/o
base: 0x00001010, not sized
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x0000
Subsystem ID: 0x0000
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xa0
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Capability register at 0xa0
type: 0x02 (AGP, rev. 0.2)
Device-dependent header:
0x40: 0x00000000 0x00001b18 0x00000000 0x00000021
0x50: 0x00885960 0xfe018e5a 0x02220000 0x00000000
0x60: 0x85b30cbd 0x5fd2151b 0x85b30cbd 0x5fd2151b
0x70: 0x00040600 0x00000000 0x00000000 0x00000000
0x80: 0x000f0101 0x00031097 0x02f00c7c 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x20000000
0xa0: 0x00200002 0x0f000203 0x00000300 0x00010001
0xb0: 0x00020000 0x2a010048 0x000fff0f 0x00000000
0xc0: 0x00000f85 0x10000f85 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Advanced Micro Devices AMD762 NorthBridge (host bridge, revision 0x11) at ? dev 0 function 0 (tag 0x80000000, intrtag 0x80000000, intrswiz 0, intrpin 0, i/o off, mem on, no quirks)
pchb0: Advanced Micro Devices AMD762 NorthBridge (rev. 0x11)
agp0 at pchb0: aperture at 0xfc000000, size 0x2000000
ppb0 at pci0 dev 1 function 0: PCI configuration registers:
Common header:
0x00: 0x700d1022 0x02200007 0x06040000 0x00016300
Vendor Name: Advanced Micro Devices (0x1022)
Device Name: AMD762 AGP Bridge (0x700d)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0220
Capability List support: off
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: PCI (0x04)
Interface: 0x00
Revision ID: 0x00
BIST: 0x00
Header Type: 0x01 (0x01)
Latency Timer: 0x63
Cache Line Size: 0x00
Type 1 (PCI-PCI bridge) header:
0x10: 0x00000000 0x00000000 0x44010100 0x22202121
0x20: 0xf9f0f800 0x0000fff0 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x000c00ff
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Primary bus number: 0x00
Secondary bus number: 0x01
Subordinate bus number: 0x01
Secondary bus latency timer: 0x44
Secondary status register: 0x2220
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Signaled Target Abort: off
Received Target Abort: off
Received Master Abort: on
System Error: off
Parity Error: off
I/O region:
base register: 0x21
limit register: 0x21
base upper 16 bits register: 0x0000
limit upper 16 bits register: 0x0000
Memory region:
base register: 0xf800
limit register: 0xf9f0
Prefetchable memory region:
base register: 0xfff0
limit register: 0x0000
base upper 32 bits register: 0x00000000
limit upper 32 bits register: 0x00000000
Reserved @ 0x34: 0x00000000
Expansion ROM Base Address: 0x00000000
Interrupt line: 0xff
Interrupt pin: 0x00 (none)
Bridge control register: 0x000c
Parity error response: off
Secondary SERR forwarding: off
ISA enable: on
VGA enable: on
Master abort reporting: off
Secondary bus reset: off
Fast back-to-back capable: off
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Advanced Micro Devices AMD762 AGP Bridge (PCI bridge) at ? dev 1 function 0 (tag 0x80000800, intrtag 0x80000800, intrswiz 0, intrpin 0, i/o on, mem on, no quirks): Advanced Micro Devices AMD762 AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: PCI configuration registers:
Common header:
0x00: 0x47421002 0x02900087 0x0300005c 0x00004210
Vendor Name: ATI Technologies (0x1002)
Device Name: 3D Rage Pro (AGP) (0x4742)
Command register: 0x0087
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: on
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0290
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: display (0x03)
Subclass Name: VGA (0x00)
Interface: 0x00
Revision ID: 0x5c
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x42
Cache Line Size: 0x10
Type 0 ("normal" device) header:
0x10: 0xf9000000 0x00002001 0xf8000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00841002
0x30: 0x00000000 0x00000050 0x00000000 0x0008010b
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xf9000000, size: 0x01000000
Base address register at 0x14
type: 32-bit i/o
base: 0x00002000, size: 0x00000100
Base address register at 0x18
type: 32-bit nonprefetchable memory
base: 0xf8000000, size: 0x00001000
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1002
Subsystem ID: 0x0084
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x50
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x08
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x0b
Capability register at 0x50
type: 0x02 (AGP, rev. 0.1)
Device-dependent header:
0x40: 0x0000000c 0x00000000 0x00000000 0x00000000
0x50: 0x00100002 0xff000203 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies 3D Rage Pro (AGP) (VGA display, revision 0x5c) at ? dev 5 function 0 (tag 0x80012800, intrtag 0x80000800, intrswiz 0x5, intrpin 0x2, i/o on, mem on, no quirks): ATI Technologies 3D Rage Pro (AGP) (rev. 0x5c)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0: PCI configuration registers:
Common header:
0x00: 0x74401022 0x0220000f 0x06010005 0x00800000
Vendor Name: Advanced Micro Devices (0x1022)
Device Name: AMD768 PCI to ISA/LPC Bridge (0x7440)
Command register: 0x000f
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: on
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0220
Capability List support: off
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: ISA (0x01)
Interface: 0x00
Revision ID: 0x05
BIST: 0x00
Header Type: 0x00+multifunction (0x80)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x00000000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x0000
Subsystem ID: 0x0000
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Device-dependent header:
0x40: 0xb0072000 0x00000001 0x8100ff0b 0x00000400
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x0000de00 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Advanced Micro Devices AMD768 PCI to ISA/LPC Bridge (ISA bridge, revision 0x05) at ? dev 7 function 0 (tag 0x80003800, intrtag 0x80003800, intrswiz 0, intrpin 0, i/o on, mem on, no quirks)
pcib0: Advanced Micro Devices AMD768 PCI to ISA/LPC Bridge (rev. 0x05)
pciide0 at pci0 dev 7 function 1: PCI configuration registers:
Common header:
0x00: 0x74411022 0x02000005 0x01018a04 0x00000000
Vendor Name: Advanced Micro Devices (0x1022)
Device Name: AMD768 EIDE Controller (0x7441)
Command register: 0x0005
I/O space accesses: on
Memory space accesses: off
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0200
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: mass storage (0x01)
Subclass Name: IDE (0x01)
Interface: 0x8a
Revision ID: 0x04
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x0000f001 0x00000000 0x00000000 0x74411022
0x30: 0x00000000 0x00000000 0x00000000 0x00000000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
type: 32-bit i/o
base: 0x0000f000, size: 0x00000010
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1022
Subsystem ID: 0x7441
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Device-dependent header:
0x40: 0x000f5423 0x00000000 0x2020205e 0xffff0056
0x50: 0xc0c0c000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x74411022 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Advanced Micro Devices AMD768 EIDE Controller (IDE mass storage, interface 0x8a, revision 0x04) at ? dev 7 function 1 (tag 0x80003900, intrtag 0x80003900, intrswiz 0, intrpin 0, i/o on, mem off, no quirks): Advanced Micro Devices AMD768 IDE Controller (rev. 0x04)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <WDC WD153AA-53BAA0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 14679 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 30064608 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at pciide0 channel 0 drive 1: <WDC WD1200JB-75CRA0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 111 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 234375000 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CD-540E, , 1.0A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
Advanced Micro Devices AMD768 Power Management Controller (miscellaneous bridge, revision 0x03) at pci0 dev 7 function 3: PCI configuration registers:
Common header:
0x00: 0x74431022 0x02800000 0x06800003 0x00001600
Vendor Name: Advanced Micro Devices (0x1022)
Device Name: AMD768 Power Management Controller (0x7443)
Command register: 0x0000
I/O space accesses: off
Memory space accesses: off
Bus mastering: off
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0280
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: miscellaneous (0x80)
Interface: 0x00
Revision ID: 0x03
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x16
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x74431022
0x30: 0x00000000 0x00000000 0x00000000 0x00000000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1022
Subsystem ID: 0x7443
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Device-dependent header:
0x40: 0x4409b080 0x00000000 0x005004a8 0x00000000
0x50: 0x00008001 0xab5b0001 0x00008001 0x00000000
0x60: 0x06800000 0x0000001f 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x74431022
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x002ec078 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Advanced Micro Devices AMD768 Power Management Controller (miscellaneous bridge, revision 0x03) at pci0 dev 7 function 3 (tag 0x80003b00, intrtag 0x80003b00, intrswiz 0, intrpin 0, i/o off, mem off, no quirks) not configured
ppb1 at pci0 dev 16 function 0: PCI configuration registers:
Common header:
0x00: 0x74481022 0x22200017 0x06040005 0x00014000
Vendor Name: Advanced Micro Devices (0x1022)
Device Name: AMD768 PCI to PCI Bridge (0x7448)
Command register: 0x0017
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: on
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x2220
Capability List support: off
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: on
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: PCI (0x04)
Interface: 0x00
Revision ID: 0x05
BIST: 0x00
Header Type: 0x01 (0x01)
Latency Timer: 0x40
Cache Line Size: 0x00
Type 1 (PCI-PCI bridge) header:
0x10: 0x00000000 0x00000000 0xa8040200 0x22003030
0x20: 0xfa20fa00 0xfa60fa60 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x000400ff
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Primary bus number: 0x00
Secondary bus number: 0x02
Subordinate bus number: 0x04
Secondary bus latency timer: 0xa8
Secondary status register: 0x2200
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Signaled Target Abort: off
Received Target Abort: off
Received Master Abort: on
System Error: off
Parity Error: off
I/O region:
base register: 0x30
limit register: 0x30
base upper 16 bits register: 0x0000
limit upper 16 bits register: 0x0000
Memory region:
base register: 0xfa00
limit register: 0xfa20
Prefetchable memory region:
base register: 0xfa60
limit register: 0xfa60
base upper 32 bits register: 0x00000000
limit upper 32 bits register: 0x00000000
Reserved @ 0x34: 0x00000000
Expansion ROM Base Address: 0x00000000
Interrupt line: 0xff
Interrupt pin: 0x00 (none)
Bridge control register: 0x0004
Parity error response: off
Secondary SERR forwarding: off
ISA enable: on
VGA enable: off
Master abort reporting: off
Secondary bus reset: off
Fast back-to-back capable: off
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Advanced Micro Devices AMD768 PCI to PCI Bridge (PCI bridge, revision 0x05) at ? dev 16 function 0 (tag 0x80008000, intrtag 0x80008000, intrswiz 0, intrpin 0, i/o on, mem on, no quirks): Advanced Micro Devices AMD768 PCI to PCI Bridge (rev. 0x05)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ohci0 at pci2 dev 0 function 0: PCI configuration registers:
Common header:
0x00: 0x74491022 0x02800017 0x0c031007 0x00004000
Vendor Name: Advanced Micro Devices (0x1022)
Device Name: AMD768 USB Controller (0x7449)
Command register: 0x0017
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: on
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0280
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: serial bus (0x0c)
Subclass Name: USB (0x03)
Interface: 0x10
Revision ID: 0x07
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0xfa200000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x74491022
0x30: 0x00000000 0x00000000 0x00000000 0x5000040a
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xfa200000, size: 0x00001000
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1022
Subsystem ID: 0x7449
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x50
Minimum Grant: 0x00
Interrupt pin: 0x04 (pin D)
Interrupt line: 0x0a
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x74491022 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Advanced Micro Devices AMD768 USB Controller (USB serial bus, interface 0x10, revision 0x07) at ? dev 0 function 0 (tag 0x80020000, intrtag 0x80008000, intrswiz 0, intrpin 0x4, i/o on, mem on, no quirks): Advanced Micro Devices AMD768 USB Controller (rev. 0x07)
ohci0: interrupting at apic 2 int 19 (irq 10)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
cbb0 at pci2 dev 4 function 0: PCI configuration registers:
Common header:
0x00: 0xac1c104c 0x02100007 0x06070001 0x00820000
Vendor Name: Texas Instruments (0x104c)
Device Name: PCI1225 PCI-CardBus Bridge (0xac1c)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: CardBus (0x07)
Interface: 0x00
Revision ID: 0x01
BIST: 0x00
Header Type: 0x02+multifunction (0x82)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 2 (PCI-CardBus bridge) header:
0x10: 0x20000000 0x020000a0 0x00030302 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x0340010b
0x40: 0x2023133f 0x00000001
Base address register at 0x10 (CardBus socket/ExCA registers)
type: 32-bit nonprefetchable memory
base: 0x20000000, size: 0x00001000
Capability list pointer: 0xa0
Secondary status register: 0x0200
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detection: off
DEVSEL timing: medium (0x1)
PCI target aborts terminate CardBus bus master transactions: off
CardBus target aborts terminate PCI bus master transactions: off
Bus initiator aborts terminate initiator transactions: off
System error: off
Parity error: off
PCI bus number: 0x02
CardBus bus number: 0x03
Subordinate bus number: 0x03
CardBus latency timer: 0x00
CardBus memory region 0:
base register: 0x00000000
limit register: 0x00000000
CardBus memory region 1:
base register: 0x00000000
limit register: 0x00000000
CardBus I/O region 0:
base register: 0x00000000
limit register: 0x00000000
CardBus I/O region 1:
base register: 0x00000000
limit register: 0x00000000
Interrupt line: 0x0b
Interrupt pin: 0x01 (pin A)
Bridge control register: 0x0340
Parity error response: off
CardBus SERR forwarding: off
ISA enable: off
VGA enable: off
CardBus master abort reporting: off
CardBus reset: on
Functional interrupts routed by ExCA registers: off
Memory window 0 prefetchable: on
Memory window 1 prefetchable: on
Write posting enable: off
Subsystem vendor ID: 0x133f
Subsystem ID: 0x2023
Base address register at 0x44 (legacy-mode registers)
type: 32-bit i/o
base: 0x00000000, size: 0x00000004
Capability register at 0xa0
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x48: 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x28449060 0x00000000 0x00000000 0x0cc07d92
0x90: 0x606000c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00800000 0x0000000e 0x0000000b
0xb0: 0x08000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Texas Instruments PCI1225 PCI-CardBus Bridge (CardBus bridge, revision 0x01) at ? dev 4 function 0 (tag 0x80022000, intrtag 0x80008000, intrswiz 0x4, intrpin 0x1, i/o on, mem on, no quirks): Texas Instruments PCI1225 PCI-CardBus Bridge (rev. 0x01) (chipflags 3)
cbb0: socket base address 0x20000000
cbb0: intrpin A, intrtag 11
Texas Instruments PCI1225 PCI-CardBus Bridge (CardBus bridge, revision 0x01) at pci2 dev 4 function 1: PCI configuration registers:
Common header:
0x00: 0xac1c104c 0x02100007 0x06070001 0x00820000
Vendor Name: Texas Instruments (0x104c)
Device Name: PCI1225 PCI-CardBus Bridge (0xac1c)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: CardBus (0x07)
Interface: 0x00
Revision ID: 0x01
BIST: 0x00
Header Type: 0x02+multifunction (0x82)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 2 (PCI-CardBus bridge) header:
0x10: 0x20001000 0x020000a0 0x00040402 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x0340010b
0x40: 0x2023133f 0x00000001
Base address register at 0x10 (CardBus socket/ExCA registers)
type: 32-bit nonprefetchable memory
base: 0x20001000, size: 0x00001000
Capability list pointer: 0xa0
Secondary status register: 0x0200
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detection: off
DEVSEL timing: medium (0x1)
PCI target aborts terminate CardBus bus master transactions: off
CardBus target aborts terminate PCI bus master transactions: off
Bus initiator aborts terminate initiator transactions: off
System error: off
Parity error: off
PCI bus number: 0x02
CardBus bus number: 0x04
Subordinate bus number: 0x04
CardBus latency timer: 0x00
CardBus memory region 0:
base register: 0x00000000
limit register: 0x00000000
CardBus memory region 1:
base register: 0x00000000
limit register: 0x00000000
CardBus I/O region 0:
base register: 0x00000000
limit register: 0x00000000
CardBus I/O region 1:
base register: 0x00000000
limit register: 0x00000000
Interrupt line: 0x0b
Interrupt pin: 0x01 (pin A)
Bridge control register: 0x0340
Parity error response: off
CardBus SERR forwarding: off
ISA enable: off
VGA enable: off
CardBus master abort reporting: off
CardBus reset: on
Functional interrupts routed by ExCA registers: off
Memory window 0 prefetchable: on
Memory window 1 prefetchable: on
Write posting enable: off
Subsystem vendor ID: 0x133f
Subsystem ID: 0x2023
Base address register at 0x44 (legacy-mode registers)
type: 32-bit i/o
base: 0x00000000, size: 0x00000004
Capability register at 0xa0
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x48: 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x28449060 0x00000000 0x00000000 0x0cc07d92
0x90: 0x606000c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00800000 0x0000000e 0x0000000b
0xb0: 0x08000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Texas Instruments PCI1225 PCI-CardBus Bridge (CardBus bridge, revision 0x01) at pci2 dev 4 function 1 (tag 0x80022100, intrtag 0x80008000, intrswiz 0x4, intrpin 0x1, i/o on, mem on, no quirks) not configured
siop0 at pci2 dev 5 function 0: PCI configuration registers:
Common header:
0x00: 0x00011000 0x02000007 0x01000002 0x00004000
Vendor Name: Symbios Logic (0x1000)
Device Name: 53c810 (0x0001)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0200
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: mass storage (0x01)
Subclass Name: SCSI (0x00)
Interface: 0x00
Revision ID: 0x02
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00003001 0xfa202000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x00000105
Base address register at 0x10
type: 32-bit i/o
base: 0x00003000, size: 0x00000100
Base address register at 0x14
type: 32-bit nonprefetchable memory
base: 0xfa202000, size: 0x00000100
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x0000
Subsystem ID: 0x0000
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x05
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x000000c0 0x1f000000 0x00090000 0x02010080
0x90: 0xffffffff 0xffffff00 0x2031f000 0x02a3b274
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0xfffffe38 0x20000000 0x00000000 0x00fffe38
0xc0: 0x00000000 0x0f000000 0x00000000 0x00000007
0xd0: 0xffffc011 0xffff0000 0xffff0000 0x6dfff278
0xe0: 0xffffffff 0xffffffff 0xffffffff 0xffffffff
0xf0: 0xffffffff 0xffffffff 0xffffffff 0xffffffff
Don't know how to pretty-print device-dependent header.
Symbios Logic 53c810 (SCSI mass storage, revision 0x02) at ? dev 5 function 0 (tag 0x80022800, intrtag 0x80008000, intrswiz 0x5, intrpin 0x2, i/o on, mem on, no quirks): Symbios Logic 53c810 (fast scsi)
siop0: interrupting at apic 2 int 17 (irq 5)
scsibus0 at siop0: 8 targets, 8 luns per target
fxp0 at pci2 dev 6 function 0: PCI configuration registers:
Common header:
0x00: 0x12298086 0x02900017 0x02000008 0x00004210
Vendor Name: Intel (0x8086)
Device Name: 82557 Fast Ethernet LAN Controller (0x1229)
Command register: 0x0017
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: on
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0290
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: network (0x02)
Subclass Name: ethernet (0x00)
Interface: 0x00
Revision ID: 0x08
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x42
Cache Line Size: 0x10
Type 0 ("normal" device) header:
0x10: 0xfa201000 0x00003481 0xfa000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x000c8086
0x30: 0x00000000 0x000000dc 0x00000000 0x3808010b
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xfa201000, size: 0x00001000
Base address register at 0x14
type: 32-bit i/o
base: 0x00003480, size: 0x00000040
Base address register at 0x18
type: 32-bit nonprefetchable memory
base: 0xfa000000, size: 0x00100000
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x8086
Subsystem ID: 0x000c
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xdc
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x38
Minimum Grant: 0x08
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x0b
Capability register at 0xdc
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe220001
0xe0: 0x3a004000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Intel 82557 Fast Ethernet LAN Controller (ethernet network, revision 0x08) at ? dev 6 function 0 (tag 0x80023000, intrtag 0x80008000, intrswiz 0x6, intrpin 0x3, i/o on, mem on, no quirks): i82559 Ethernet, rev 8
fxp0: interrupting at apic 2 int 18 (irq 11)
fxp0: Ethernet address 00:02:b3:07:0b:a8
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci2 dev 7 function 0: PCI configuration registers:
Common header:
0x00: 0x12298086 0x02800007 0x02000002 0x00004200
Vendor Name: Intel (0x8086)
Device Name: 82557 Fast Ethernet LAN Controller (0x1229)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0280
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: network (0x02)
Subclass Name: ethernet (0x00)
Interface: 0x00
Revision ID: 0x02
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x42
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0xfa600008 0x000034c1 0xfa100000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00018086
0x30: 0x00000000 0x00000000 0x00000000 0x3808010a
Base address register at 0x10
type: 32-bit prefetchable memory
base: 0xfa600000, size: 0x00001000
Base address register at 0x14
type: 32-bit i/o
base: 0x000034c0, size: 0x00000020
Base address register at 0x18
type: 32-bit nonprefetchable memory
base: 0xfa100000, size: 0x00100000
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x8086
Subsystem ID: 0x0001
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x38
Minimum Grant: 0x08
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x0a
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Intel 82557 Fast Ethernet LAN Controller (ethernet network, revision 0x02) at ? dev 7 function 0 (tag 0x80023800, intrtag 0x80008000, intrswiz 0x7, intrpin 0x4, i/o on, mem on, no quirks): Intel i82557 Ethernet, rev 2
fxp1: interrupting at apic 2 int 19 (irq 10)
fxp1: Ethernet address 00:a0:c9:6e:d4:d5
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex0 at pci2 dev 8 function 0: PCI configuration registers:
Common header:
0x00: 0x920010b7 0x02100017 0x02000078 0x00005010
Vendor Name: 3Com (0x10b7)
Device Name: 3c905C-TX 10/100 Ethernet with mngmt (0x9200)
Command register: 0x0017
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: on
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: network (0x02)
Subclass Name: ethernet (0x00)
Interface: 0x00
Revision ID: 0x78
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x50
Cache Line Size: 0x10
Type 0 ("normal" device) header:
0x10: 0x00003401 0xfa202400 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x246610f1
0x30: 0x00000000 0x000000dc 0x00000000 0x0a0a010a
Base address register at 0x10
type: 32-bit i/o
base: 0x00003400, size: 0x00000080
Base address register at 0x14
type: 32-bit nonprefetchable memory
base: 0xfa202400, size: 0x00000080
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x10f1
Subsystem ID: 0x2466
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xdc
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x0a
Minimum Grant: 0x0a
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x0a
Capability register at 0xdc
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe020001
0xe0: 0x43004100 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
3Com 3c905C-TX 10/100 Ethernet with mngmt (ethernet network, revision 0x78) at ? dev 8 function 0 (tag 0x80024000, intrtag 0x80008000, intrswiz 0x8, intrpin 0x1, i/o on, mem on, no quirks): 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x78)
ex0: interrupting at apic 2 int 19 (irq 10)
ex0: MAC address 00:e0:81:23:26:c0
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
CardBus latency timer 0x20 (20030302)
PCI latency timer 0x10 (821000)
pccbb_power: CARDBUS_VCC_0V and CARDBUS_VPP_0V [44]
cbb0: bad Vcc request. sock_ctrl 0xffffff88, sock_status 0xffffffff
pccbb_power: CARDBUS_VCC_0V and CARDBUS_VPP_0V [44]
pci_intr_map: bus 2 dev 4 func 0 pin 1; line 11
pci_intr_map: no MP mapping found
isa_intr_establish: no MP mapping found
cbb0: interrupting at irq 11
PCI config regs:
0x00: ac1c104c 02100007 06070001 00821000
0x10: 20000000 020000a0 20030302 fffff000
0x20: 00000000 fffff000 00000000 fffffffc
0x30: 00000000 fffffffc 00000000 07c0010b
0x40: 2023133f 00000001 00000000 00000000
0x80: 28649060 00000000 00000000 0cc07d92
0x90: 606000c0 00000000 00000000 00000000
0xa0: 7e210001 00800000 0000000e 0000000b
socket regs: ffffffff ffffffff ffffffff ffffffff ffffffff
ExCA regs: ff ff ff ff ff ff ff ff
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
pccbb_pcmcia_card_detect
pccbbattach: found cardslot
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ffff netmask ffff ttymask ffff
cpu0: prelint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 300c0<vector=c0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: enabling
ioapic0: int0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
ioapic0: int1 190<vector=90,delmode=1,dest=0> 1000000<target=1>
ioapic0: int2 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int3 1d0<vector=d0,delmode=1,dest=0> 1000000<target=1>
ioapic0: int4 1d1<vector=d1,delmode=1,dest=0> 1000000<target=1>
ioapic0: int5 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int6 160<vector=60,delmode=1,dest=0> 1000000<target=1>
ioapic0: int7 191<vector=91,delmode=1,dest=0> 1000000<target=1>
ioapic0: int8 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int9 91d2<vector=d2,delmode=1,pending,level,dest=0> 1000000<target=1>
ioapic0: int10 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int11 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int12 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int13 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int14 161<vector=61,delmode=1,dest=0> 1000000<target=1>
ioapic0: int15 162<vector=62,delmode=1,dest=0> 1000000<target=1>
ioapic0: int16 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int17 a163<vector=63,delmode=1,actlo,level,dest=0> 1000000<target=1>
ioapic0: int18 a170<vector=70,delmode=1,actlo,level,dest=0> 1000000<target=1>
ioapic0: WARNING: sharing interrupt between different IPLs (currently broken)
ioapic0: pin 19, ipls 60..70
ioapic0: int19 a164<vector=64,delmode=1,actlo,level,dest=0> 1000000<target=1>
ioapic0: int20 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int21 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int22 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int23 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
scsibus0: waiting 2 seconds for devices to settle...
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: timer0 200c0<vector=c0,delmode=0,dest=0> 0<target=0>
cpu1: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu1: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu1: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: CPU 0 running
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
wd0a: error reading fsbn 12484944 of 12484944-12484959 (wd0 bn 12485007; cn 12385 tn 14 sn 45), retrying
wd0: (aborted command, interface CRC error)
wd0: soft error (corrected)
wd1: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1e: error reading fsbn 5184 of 5184-5207 (wd1 bn 5184; cn 5 tn 2 sn 18), retrying
wd1: (aborted command, interface CRC error)
wd1: soft error (corrected)
arp info overwritten for 198.58.5.26 by 08:00:46:0c:cc:ba
arp info overwritten for 198.58.5.26 by 00:30:c1:aa:d1:00
set{u,g}id pid 27121 (netstat) was invoked by uid 7053 ppid 17881 (mozilla-bin) with fd 0 closed
ex0: uplistptr was 0