Hi,

I've a (detected) SiS900 ethernet card in my desknote ("Onboard full duplex 10/100 Base-T Ethernet, MAC : SiS 961 built-in"). I receive this output after "ifconfig -am":

-----------------------------------
sip0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	address: 00:50:eb:05:82:72
	media: Ethernet none (none)
	supported Ethernet media:
		media none
	inet 192.168.0.21 netmask 0xffffff00 broadcast 192.168.0.255
	inet6 fe80::250:ebff:fe05:8272%sip0 prefixlen 64 scopeid 0x1
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33220
	inet 127.0.0.1 netmask 0xff000000
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
	inet6 ::1 prefixlen 128
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
strip0: flags=0<> mtu 1100
strip1: flags=0<> mtu 1100
-----------------------------------

I tried the GENERIC_DIAGNOSTIC kernels from 1.6_STABLE and (after some weeks and google searchs) I didn't find any solution for "none media supported". 

You can find the product especification of my desknote here:
http://www.shentech.com/ecsib4a9sis2.html
http://www.ecs.com.tw/products/ibuddie4.htm

Any help will be appreciated.

TIA,

-fmac

BOF DMESG==============================
NetBSD 1.6_STABLE (GENERIC_DIAGNOSTIC) #0: Thu Oct 31 08:26:57 UTC 2002
    root@heaven:/usr/src/sys/arch/i386/compile/GENERIC_DIAGNOSTIC
cpu0: Intel Pentium 4 (686-class), 1696.34 MHz
cpu0: D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 256 KB 64b/line 8-way
cpu0: features 3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 3febf9ff<PGE,MCA,CMOV,FGPAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features 3febf9ff<FXSR,SSE,SSE2,SS,HTT,TM>
total memory = 223 MB
avail memory = 200 MB
using 2887 buffers containing 11548 KB of memory
BIOS32 rev. 0 found at 0xfdae0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System SiS 650 Host Bridge (rev. 0x01)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C201 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Silicon Integrated System product 0x6325 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0x00)
pciide0 at pci0 dev 2 function 5: Silicon Integrated System 5597/5598 IDE controller (rev. 0xd0)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHR2020AT>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <QSI CD-RW/DVD-ROM SBW-081, , NK01> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
Silicon Integrated System product 0x7012 (audio multimedia, revision 0xa0) at pci0 dev 2 function 7 not configured
sip0 at pci0 dev 3 function 0: SiS 900 10/100 Ethernet, rev 0x90
sip0: interrupting at irq 5
sip0: Ethernet address 00:50:eb:05:82:72
Conexant Systems product 0x2f00 (miscellaneous communications, revision 0x01) at pci0 dev 5 function 0 not configured
VIA Technologies VT3606 OHCI IEEE 1394 Controller (Firewire serial bus, interface 0x10, revision 0x46) at pci0 dev 7 function 0 not configured
uhci0 at pci0 dev 8 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x50)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 8 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x50)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
VIA Technologies product 0x3104 (USB serial bus, interface 0x20, revision 0x51) at pci0 dev 8 function 2 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
biomask ef7d netmask ef7d ttymask ffff
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
EOF DMESG==============================