Subject: Re: RealTek 8139C+, rtk driver, and watchdog timeouts
To: None <port-i386-owner@netbsd.org>
From: None <markr@cat.co.za>
List: port-i386
Date: 10/28/2002 08:31:54
I have found a similar problem with a motherboard with an on board Realtek. I forced the other pci devices to
use any irq other than the one used by the realtek and found that the watchdog timeout errors went away
and the 8139 functioned OK.
Unfortunately this meant that I could not use 2 PCI slots for cards using interrupts!
Mark
On 27 Oct 2002 at 10:03, Michael Graff wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> My guess is interrupts.
>
> - --Michael
>
> Gary Duzan <gary@duzan.org> writes:
>
> > I recently picked up a Compaq Presario 910US which comes with
> > a built-in RealTek 8139C+, and while it appears to be probed ok and
> > pushes packets around, the performance is sub-abysmal (5-10 second
> > pings over the local ethernet), and I keep getting "watchdog
> > timeout" messages. I get the same thing with 1.5.3 GENERIC, 1.6
> > GENERIC, 1.6 GENERIC_LAPTOP, and 1.6I+nathenw_sa custom kernels. I
> > assume interrupts are being lost, but a quick glance at the BIOS
> > settings, the 8139C+ spec, and the code didn't turn up anything
> > obviously wrong. I even tried a patch or two based on FreeBSD driver
> > changes, but without effect.
> >
> > Any ideas where to look next? Has anyone else run into this
> > problem? I'm attaching dmesg output for the 1.6* kernels in case it
> > might help. Thanks.
> >
> > Gary D. Duzan
> >
> >
> > NetBSD 1.6 (GENERIC) #0: Sun Sep 8 19:43:40 UTC 2002
> > autobuild@tgm.daemon.org:/autobuild/i386/OBJ/autobuild/src/sys/a
> > rch/i386/compile/GENERIC
> > cpu0: AMD K7 (Athlon) (686-class), 1325.20 MHz
> > cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
> > cpu0: L2 cache 256 KB 64b/line 16-way cpu0: features
> > 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR> cpu0: features
> > 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX> cpu0: features
> > 383f9ff<FXSR,SSE> total memory = 239 MB avail memory = 215 MB using
> > 3091 buffers containing 12364 KB of memory BIOS32 rev. 0 found at
> > 0xfd760 mainbus0 (root) pci0 at mainbus0 bus 0: configuration mode 1
> > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> > pchb0 at pci0 dev 0 function 0 pchb0: ATI Technologies product
> > 0xcab0 (rev. 0x13) agp at pchb0 not configured ppb0 at pci0 dev 1
> > function 0: ATI Technologies product 0x700f (rev. 0x01) pci1 at ppb0
> > bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 5
> > function 0: ATI Technologies product 0x4336 (rev. 0x00) wsdisplay0
> > at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1:
> > connecting to wsdisplay0 ohci0 at pci0 dev 2 function 0: Acer Labs
> > M5237 USB Host Controller (rev. 0x03) ohci0: interrupting at irq 11
> > ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision
> > 1.0 uhub0 at usb0 uhub0: Acer Labs OHCI root hub, class 9/0, rev
> > 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered
> > pcib0 at pci0 dev 7 function 0 pcib0: Acer Labs M1543 PCI-ISA Bridge
> > (rev. 0x00) autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link
> > Controller Audio Device (rev. 0x02) autri0: interrupting at irq 5
> > autri0: ADS99 codec; headphone, Analog Devices Phat Stereo audio0 at
> > autri0: full duplex, mmap, independent midi0 at autri0: 4DWAVE MIDI
> > UART Texas Instruments PCI1410 PCI-CardBus Bridge (CardBus bridge,
> > revision 0x02) at pci0 dev 10 function 0 not configured rtk0 at pci0
> > dev 11 function 0: RealTek 8139 10/100BaseTX rtk0: interrupting at
> > irq 11 rtk0: Ethernet address 00:08:02:d0:4a:8c ukphy0 at rtk0 phy
> > 7: Generic IEEE 802.3u media interface ukphy0: OUI 0x000000, model
> > 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX,
> > 100baseTX-FDX, auto Conexant Systems product 0x2f00 (miscellaneous
> > communications, revision 0x01) at pci0 dev 12 function 0 not
> > configured ohci1 at pci0 dev 15 function 0: Acer Labs M5237 USB Host
> > Controller (rev. 0x03) ohci1: interrupting at irq 11 ohci1: OHCI
> > version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at
> > usb1 uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr
> > 1 uhub1: 4 ports with 4 removable, self powered pciide0 at pci0 dev
> > 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
> > pciide0: bus-master DMA support present pciide0: primary channel
> > configured to compatibility mode wd0 at pciide0 channel 0 drive 0:
> > <HITACHI_DK23DA-30> wd0: drive supports 16-sector PIO transfers, LBA
> > addressing wd0: 28615 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect
> > x 58605120 sectors wd0: 32-bit data port wd0: drive supports PIO
> > mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) pciide0: primary
> > channel interrupting at irq 14 wd0(pciide0:0:0): using PIO mode 4,
> > Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers) pciide0:
> > secondary channel configured to compatibility mode atapibus0 at
> > pciide0 channel 1: 2 targets cd0 at atapibus0 drive 0:
> > <HL-DT-STCD-RW/DVD DRIVE GCC-4240N, , 0109> type 5 cdrom removable
> > cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2
> > pciide0: secondary channel interrupting at irq 15 cd0(pciide0:1:0):
> > using PIO mode 4, DMA mode 2 (using DMA data transfers) Acer Labs
> > M7101 Power Management Controller (miscellaneous bridge) at pci0 dev
> > 17 function 0 not configured Texas Instruments product 0x8023
> > (Firewire serial bus, interface 0x10) at pci0 dev 19 function 0 not
> > configured isa0 at pcib0 com1 at isa0 port 0x2f8-0x2ff irq 3:
> > ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at
> > pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0:
> > console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0:
> > using irq 12 for aux slot wsmouse0 at pms0 mux 0 lpt0 at isa0 port
> > 0x378-0x37b irq 7 pcppi0 at isa0 port 0x61 midi1 at pcppi0: PC
> > speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n
> > Play device support npx0 at isa0 port 0xf0-0xff: using exception 16
> > fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 fd0 at fdc0 drive 0:
> > 1.44MB, 80 cyl, 2 head, 18 sec pcic0 at isa0 port 0x3e0-0x3e1 iomem
> > 0xd0000-0xdffff irq pcic0: controller 0 (Intel 82365SL Revision 1)
> > has sockets A and B pcic0: controller 1 (Intel 82365SL Revision 1)
> > has no sockets pcmcia0 at pcic0 controller 0 socket 0 pcmcia1 at
> > pcic0 controller 0 socket 1 isapnp0: no ISA Plug 'n Play devices
> > found biomask ef55 netmask ef55 ttymask ffd7 pcic0: controller 0
> > detecting irqs with mask 0xdeb8:..4..9 pcic0: using irq 4 for socket
> > events Kernelized RAIDframe activated boot device: wd0 root on wd0a
> > dumps on wd0b root file system type: ffs rtk0: watchdog timeout
> > rtk0: watchdog timeout rtk0: watchdog timeout rtk0: watchdog timeout
> > rtk0: watchdog timeout wsdisplay0: screen 1 added (80x25, vt100
> > emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation)
> > wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0:
> > screen 4 added (80x25, vt100 emulation) ry BIOS32 rev. 0 found at
> > 0xfd760 PCI BIOS rev. 2.1 found at 0xfd87e pcibios: config mechanism
> > [1][x], special cycles [x][x], last bus 1 PCI IRQ Routing Table rev.
> > 1.0 found at 0xfdf10, size 208 bytes (11 entries) PCI Interrupt
> > Router at 000:07:0 (Acer Labs M1543 PCI-ISA Bridge)
> > ------------------------------------------
> > device vendor product pin PIRQ IRQ stage
> > ------------------------------------------
> > ------------------------------------------
> > PCI fixup examining 1002:cab0
> > PCI fixup examining 1002:700f
> > PCI fixup examining 1002:4336
> > PCI bridge 0: primary 0, secondary 1, subordinate 1
> > PCI fixup examining 10b9:5237
> > PCI fixup examining 10b9:1533
> > PCI fixup examining 10b9:5451
> > PCI fixup examining 104c:ac50
> > PCI bridge 1: primary 0, secondary 2, subordinate 2
> > PCI fixup examining 10ec:8139
> > PCI fixup examining 14f1:2f00
> > PCI fixup examining 10b9:5237
> > PCI fixup examining 10b9:5229
> > PCI fixup examining 10b9:7101
> > PCI fixup examining 104c:8023
> > PCI bus #2 is the last bus
> > [System BIOS Setting]-----------------------
> > device vendor product
> > register space address size
> > --------------------------------------------
> > 000:00:0 0x1002 0xcab0
> > 10h mem 0xf8000000 0x04000000
> > 14h mem 0xf4400000 0x00001000
> > 18h port 0x00008090 0x00000004
> > [OK]
> > 000:01:0 0x1002 0x700f
> > [OK]
> > 000:02:0 0x10b9 0x5237
> > 10h mem 0xf4014000 0x00001000
> > [OK]
> > 000:07:0 0x10b9 0x1533
> > [OK]
> > 000:08:0 0x10b9 0x5451
> > 10h port 0x00008400 0x00000100
> > 14h mem 0xf4015000 0x00001000
> > [OK]
> > 000:10:0 0x104c 0xac50
> > 10h mem 0x00000000 0x00001000
> > [NG]
> > 000:11:0 0x10ec 0x8139
> > 10h port 0x00008800 0x00000100
> > 14h mem 0xf4017800 0x00000100
> > [OK]
> > 000:12:0 0x14f1 0x2f00
> > 10h mem 0xf4000000 0x00010000
> > 14h port 0x00008098 0x00000008
> > [OK]
> > 000:15:0 0x10b9 0x5237
> > 10h mem 0xf4016000 0x00001000
> > [OK]
> > 000:16:0 0x10b9 0x5229
> > 20h port 0x00008080 0x00000010
> > [OK]
> > 000:17:0 0x10b9 0x7101
> > [OK]
> > 000:19:0 0x104c 0x8023
> > 10h mem 0xf4017000 0x00000800
> > 14h mem 0xf4010000 0x00004000
> > [OK]
> > 001:05:0 0x1002 0x4336
> > 10h mem 0xf6000000 0x02000000
> > 14h port 0x00009000 0x00000100
> > 18h mem 0xf4100000 0x00010000
> > [OK]
> > --------------------------[ 1 devices bogus]
> > Physical memory end: 0x0effe000
> > PCI memory mapped I/O space start: 0x0f000000
> > [PCIBIOS fixup stage]-----------------------
> > device vendor product
> > register space address size
> > --------------------------------------------
> > 000:00:0 0x1002 0xcab0
> > 10h mem 0xf8000000 0x04000000
> > 14h mem 0xf4400000 0x00001000
> > 18h port 0x00008090 0x00000004
> > [OK]
> > 000:01:0 0x1002 0x700f
> > [OK]
> > 000:02:0 0x10b9 0x5237
> > 10h mem 0xf4014000 0x00001000
> > [OK]
> > 000:07:0 0x10b9 0x1533
> > [OK]
> > 000:08:0 0x10b9 0x5451
> > 10h port 0x00008400 0x00000100
> > 14h mem 0xf4015000 0x00001000
> > [OK]
> > 000:10:0 0x104c 0xac50
> > 10h mem 0x0f000000 0x00001000
> > [OK]
> > 000:11:0 0x10ec 0x8139
> > 10h port 0x00008800 0x00000100
> > 14h mem 0xf4017800 0x00000100
> > [OK]
> > 000:12:0 0x14f1 0x2f00
> > 10h mem 0xf4000000 0x00010000
> > 14h port 0x00008098 0x00000008
> > [OK]
> > 000:15:0 0x10b9 0x5237
> > 10h mem 0xf4016000 0x00001000
> > [OK]
> > 000:16:0 0x10b9 0x5229
> > 20h port 0x00008080 0x00000010
> > [OK]
> > 000:17:0 0x10b9 0x7101
> > [OK]
> > 000:19:0 0x104c 0x8023
> > 10h mem 0xf4017000 0x00000800
> > 14h mem 0xf4010000 0x00004000
> > [OK]
> > 001:05:0 0x1002 0x4336
> > 10h mem 0xf6000000 0x02000000
> > 14h port 0x00009000 0x00000100
> > 18h mem 0xf4100000 0x00010000
> > [OK]
> > --------------------------[ 0 devices bogus]
> > mainbus0 (root)
> > pci0 at mainbus0 bus 0: configuration mode 1
> > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> > pchb0 at pci0 dev 0 function 0 pchb0: ATI Technologies product
> > 0xcab0 (rev. 0x13) agp at pchb0 not configured ppb0 at pci0 dev 1
> > function 0: ATI Technologies product 0x700f (rev. 0x01) pci1 at ppb0
> > bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 5
> > function 0: ATI Technologies product 0x4336 (rev. 0x00) wsdisplay0
> > at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1:
> > connecting to wsdisplay0 ohci0 at pci0 dev 2 function 0: Acer Labs
> > M5237 USB Host Controller (rev. 0x03) ohci0: interrupting at irq 11
> > ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision
> > 1.0 uhub0 at usb0 uhub0: Acer Labs OHCI root hub, class 9/0, rev
> > 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered
> > pcib0 at pci0 dev 7 function 0 pcib0: Acer Labs M1543 PCI-ISA Bridge
> > (rev. 0x00) autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link
> > Controller Audio Device (rev. 0x02) autri0: interrupting at irq 5
> > autri0: ADS99 codec; headphone, Analog Devices Phat Stereo audio0 at
> > autri0: full duplex, mmap, independent midi0 at autri0: 4DWAVE MIDI
> > UART cbb0 at pci0 dev 10 function 0: Texas Instruments PCI1410
> > PCI-CardBus Bridge (rev. 0x02) cbb0: NOT USED because of
> > unconfigured interrupt rtk0 at pci0 dev 11 function 0: RealTek 8139
> > 10/100BaseTX rtk0: interrupting at irq 11 rtk0: Ethernet address
> > 00:08:02:d0:4a:8c ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media
> > interface ukphy0: OUI 0x000000, model 0x0000, rev. 0 ukphy0:
> > 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Conexant
> > Systems product 0x2f00 (miscellaneous communications, revision 0x01)
> > at pci0 dev 12 function 0 not configured ohci1 at pci0 dev 15
> > function 0: Acer Labs M5237 USB Host Controller (rev. 0x03) ohci1:
> > interrupting at irq 11 ohci1: OHCI version 1.0, legacy support usb1
> > at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: Acer Labs OHCI root
> > hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4
> > removable, self powered pciide0 at pci0 dev 16 function 0: Acer Labs
> > M5229 UDMA IDE Controller (rev. 0xc4) pciide0: bus-master DMA
> > support present pciide0: primary channel configured to compatibility
> > mode wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23DA-30> wd0:
> > drive supports 16-sector PIO transfers, LBA addressing wd0: 28615
> > MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
> > wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2,
> > Ultra-DMA mode 5 (Ultra/100) pciide0: primary channel interrupting
> > at irq 14 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> > (Ultra/100) (using DMA data transfers) pciide0: secondary channel
> > configured to compatibility mode atapibus0 at pciide0 channel 1: 2
> > targets cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE
> > GCC-4240N, , 0109> type 5 cdrom removable cd0: 32-bit data port cd0:
> > drive supports PIO mode 4, DMA mode 2 pciide0: secondary channel
> > interrupting at irq 15 cd0(pciide0:1:0): using PIO mode 4, DMA mode
> > 2 (using DMA data transfers) Acer Labs M7101 Power Management
> > Controller (miscellaneous bridge) at pci0 dev 17 function 0 not
> > configured Texas Instruments product 0x8023 (Firewire serial bus,
> > interface 0x10) at pci0 dev 19 function 0 not configured isa0 at
> > pcib0 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
> > pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0:
> > using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using
> > wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux
> > slot wsmouse0 at pms0 mux 0 lpt0 at isa0 port 0x378-0x37b irq 7
> > pcppi0 at isa0 port 0x61 midi1 at pcppi0: PC speaker sysbeep0 at
> > pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
> > npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port
> > 0x3f0-0x3f7 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head,
> > 18 sec pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
> > pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
> > pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
> > pcmcia0 at pcic0 controller 0 socket 0 pcmcia1 at pcic0 controller 0
> > socket 1 isapnp0: no ISA Plug 'n Play devices found apm0 at
> > mainbus0: Power Management spec V1.2 biomask ef55 netmask ef55
> > ttymask ffd7 pcic0: controller 0 detecting irqs with mask
> > 0xdeb8:..4..9..10 pcic0: using irq 4 for socket events boot device:
> > wd0 root on wd0a dumps on wd0b root file system type: ffs rtk0:
> > watchdog timeout rtk0: watchdog timeout rtk0: watchdog timeout rtk0:
> > watchdog timeout rtk0: watchdog timeout wsdisplay0: screen 1 added
> > (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100
> > emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation)
> > wsdisplay0: screen 4 added (80x25, vt100 emulation) rtk0: watchdog
> > timeout NetBSD 1.6I (ROADTRIP) #2: Sat Oct 26 20:02:15 EDT 2002
> > gary@capo:/usr/src/sys/arch/i386/compile/ROADTRIP
> > total memory = 239 MB
> > avail memory = 219 MB
> > using 3091 buffers containing 12364 KB of memory
> > BIOS32 rev. 0 found at 0xfd760
> > mainbus0 (root)
> > cpu0 at mainbus0: (uniprocessor)
> > cpu0: AMD Athlon XP 1500+ (686-class), 1325.22 MHz
> > cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
> > cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX> cpu0: features
> > 383f9ff<FXSR,SSE> cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB
> > 64b/line 2-way cpu0: L2 cache 256 KB 64b/line 16-way cpu0: ITLB 16 4
> > KB entries fully associative, 8 4 MB entries fully associative cpu0:
> > DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way cpu0: 8
> > page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o
> > space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at
> > pci0 dev 0 function 0 pchb0: ATI Technologies product 0xcab0 (rev.
> > 0x13) agp at pchb0 not configured ppb0 at pci0 dev 1 function 0: ATI
> > Technologies product 0x700f (rev. 0x01) pci1 at ppb0 bus 1 pci1: i/o
> > space, memory space enabled vga0 at pci1 dev 5 function 0: ATI
> > Technologies product 0x4336 (rev. 0x00) wsdisplay0 at vga0 kbdmux 1:
> > console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0
> > Acer Labs M5237 USB Host Controller (USB serial bus, interface 0x10,
> > revision 0x03) at pci0 dev 2 function 0 not configured pcib0 at pci0
> > dev 7 function 0 pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
> > autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller
> > Audio Device (rev. 0x02) autri0: interrupting at irq 5 autri0:
> > Analog Devices AD1886A codec; headphone, Analog Devices Phat Stereo
> > audio0 at autri0: full duplex, mmap, independent midi0 at autri0:
> > 4DWAVE MIDI UART cbb0 at pci0 dev 10 function 0: Texas Instruments
> > PCI1410 PCI-CardBus Bridge (rev. 0x02) cbb0: NOT USED because of
> > unconfigured interrupt rtk0 at pci0 dev 11 function 0: RealTek 8139
> > 10/100BaseTX rtk0: interrupting at irq 11 rtk0: Ethernet address
> > 00:08:02:d0:4a:8c ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media
> > interface ukphy0: OUI 0x000000, model 0x0000, rev. 0 ukphy0:
> > 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Conexant
> > Systems product 0x2f00 (miscellaneous communications, revision 0x01)
> > at pci0 dev 12 function 0 not configured Acer Labs M5237 USB Host
> > Controller (USB serial bus, interface 0x10, revision 0x03) at pci0
> > dev 15 function 0 not configured pciide0 at pci0 dev 16 function 0:
> > Acer Labs M5229 UDMA IDE Controller (rev. 0xc4) pciide0: bus-master
> > DMA support present pciide0: primary channel configured to
> > compatibility mode wd0 at pciide0 channel 0 drive 0:
> > <HITACHI_DK23DA-30> wd0: drive supports 16-sector PIO transfers, LBA
> > addressing wd0: 28615 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect
> > x 58605120 sectors wd0: 32-bit data port wd0: drive supports PIO
> > mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) pciide0: primary
> > channel interrupting at irq 14 wd0(pciide0:0:0): using PIO mode 4,
> > Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers) pciide0:
> > secondary channel configured to compatibility mode atapibus0 at
> > pciide0 channel 1: 2 targets cd0 at atapibus0 drive 0:
> > <HL-DT-STCD-RW/DVD DRIVE GCC-4240N, , 0109> cdrom removable cd0:
> > 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2 pciide0:
> > secondary channel interrupting at irq 15 cd0(pciide0:1:0): using PIO
> > mode 4, DMA mode 2 (using DMA data transfers) Acer Labs M7101 Power
> > Management Controller (miscellaneous bridge) at pci0 dev 17 function
> > 0 not configured Texas Instruments TSB43AA22/A OHCI IEEE 1394 Host
> > Controller (Firewire serial bus, interface 0x10) at pci0 dev 19
> > function 0 not configured isa0 at pcib0 com1 at isa0 port
> > 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port
> > 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd
> > slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at
> > pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0
> > mux 0 lpt0 at isa0 port 0x378-0x37b irq 7 pcppi0 at isa0 port 0x61
> > sysbeep0 at pcppi0 npx0 at isa0 port 0xf0-0xff: using exception 16
> > fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 fd0 at fdc0 drive 0:
> > 1.44MB, 80 cyl, 2 head, 18 sec pcic0 at isa0 port 0x3e0-0x3e1 iomem
> > 0xd0000-0xdffff irq pcic0: controller 0 (Intel 82365SL Revision 1)
> > has sockets A and B pcic0: controller 1 (Intel 82365SL Revision 1)
> > has no sockets pcmcia0 at pcic0 controller 0 socket 0 pcmcia1 at
> > pcic0 controller 0 socket 1 apm0 at mainbus0: Power Management spec
> > V1.2 apm0: A/C state: on apm0: battery charge state: no battery
> > biomask e755 netmask ef55 ttymask ffd7 pcic0: controller 0 detecting
> > irqs with mask 0xdeb8:..4..9 pcic0: using irq 4 for socket events
> > boot device: wd0 root on wd0a dumps on wd0b root file system type:
> > ffs rtk0: watchdog timeout rtk0: watchdog timeout rtk0: watchdog
> > timeout rtk0: watchdog timeout rtk0: watchdog timeout wsdisplay0:
> > screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added
> > (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100
> > emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.0.7 (NetBSD)
> Comment: See http://www.flame.org/~explorer/pgp for my keys
>
> iD8DBQE9vCqOl6Nz7kJWYWYRAjGDAJ41IUyn9A5fzgJJJIELq1DPYooMxgCdEmGn
> BKKn26RyayCU+w/M4PBCDvY=
> =G60t
> -----END PGP SIGNATURE-----
>