Subject: RealTek 8139C+, rtk driver, and watchdog timeouts
To: None <port-i386@netbsd.org>
From: Gary Duzan <gary@duzan.org>
List: port-i386
Date: 10/27/2002 12:16:56
------- =_aaaaaaaaaa0
Content-Type: text/plain; charset="us-ascii"
Content-ID: <1447.1035738908.1@capo.xnet.duzan.org>
I recently picked up a Compaq Presario 910US which comes with
a built-in RealTek 8139C+, and while it appears to be probed ok
and pushes packets around, the performance is sub-abysmal (5-10
second pings over the local ethernet), and I keep getting "watchdog
timeout" messages. I get the same thing with 1.5.3 GENERIC, 1.6
GENERIC, 1.6 GENERIC_LAPTOP, and 1.6I+nathenw_sa custom kernels.
I assume interrupts are being lost, but a quick glance at the BIOS
settings, the 8139C+ spec, and the code didn't turn up anything
obviously wrong. I even tried a patch or two based on FreeBSD
driver changes, but without effect.
Any ideas where to look next? Has anyone else run into this
problem? I'm attaching dmesg output for the 1.6* kernels in case
it might help. Thanks.
Gary D. Duzan
------- =_aaaaaaaaaa0
Content-Type: text/plain; name="dmesg.GENERIC"; charset="us-ascii"
Content-ID: <1447.1035738908.2@capo.xnet.duzan.org>
Content-Description: dmesg.GENERIC
NetBSD 1.6 (GENERIC) #0: Sun Sep 8 19:43:40 UTC 2002
autobuild@tgm.daemon.org:/autobuild/i386/OBJ/autobuild/src/sys/arch/i386/compile/GENERIC
cpu0: AMD K7 (Athlon) (686-class), 1325.20 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
total memory = 239 MB
avail memory = 215 MB
using 3091 buffers containing 12364 KB of memory
BIOS32 rev. 0 found at 0xfd760
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ATI Technologies product 0xcab0 (rev. 0x13)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: ATI Technologies product 0x700f (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: ATI Technologies product 0x4336 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ohci0 at pci0 dev 2 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x02)
autri0: interrupting at irq 5
autri0: ADS99 codec; headphone, Analog Devices Phat Stereo
audio0 at autri0: full duplex, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
Texas Instruments PCI1410 PCI-CardBus Bridge (CardBus bridge, revision 0x02) at pci0 dev 10 function 0 not configured
rtk0 at pci0 dev 11 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:08:02:d0:4a:8c
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Conexant Systems product 0x2f00 (miscellaneous communications, revision 0x01) at pci0 dev 12 function 0 not configured
ohci1 at pci0 dev 15 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci1: interrupting at irq 11
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pciide0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23DA-30>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 28615 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4240N, , 0109> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 17 function 0 not configured
Texas Instruments product 0x8023 (Firewire serial bus, interface 0x10) at pci0 dev 19 function 0 not configured
isa0 at pcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
biomask ef55 netmask ef55 ttymask ffd7
pcic0: controller 0 detecting irqs with mask 0xdeb8:..4..9
pcic0: using irq 4 for socket events
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
rtk0: watchdog timeout
rtk0: watchdog timeout
rtk0: watchdog timeout
rtk0: watchdog timeout
rtk0: watchdog timeout
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
------- =_aaaaaaaaaa0
Content-Type: text/plain; name="dmesg.GENERIC_LAPTOP"; charset="us-ascii"
Content-ID: <1447.1035738908.3@capo.xnet.duzan.org>
Content-Description: dmesg.GENERIC_LAPTOP
ry
BIOS32 rev. 0 found at 0xfd760
PCI BIOS rev. 2.1 found at 0xfd87e
pcibios: config mechanism [1][x], special cycles [x][x], last bus 1
PCI IRQ Routing Table rev. 1.0 found at 0xfdf10, size 208 bytes (11 entries)
PCI Interrupt Router at 000:07:0 (Acer Labs M1543 PCI-ISA Bridge)
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
------------------------------------------
PCI fixup examining 1002:cab0
PCI fixup examining 1002:700f
PCI fixup examining 1002:4336
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 10b9:5237
PCI fixup examining 10b9:1533
PCI fixup examining 10b9:5451
PCI fixup examining 104c:ac50
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI fixup examining 10ec:8139
PCI fixup examining 14f1:2f00
PCI fixup examining 10b9:5237
PCI fixup examining 10b9:5229
PCI fixup examining 10b9:7101
PCI fixup examining 104c:8023
PCI bus #2 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x1002 0xcab0
10h mem 0xf8000000 0x04000000
14h mem 0xf4400000 0x00001000
18h port 0x00008090 0x00000004
[OK]
000:01:0 0x1002 0x700f
[OK]
000:02:0 0x10b9 0x5237
10h mem 0xf4014000 0x00001000
[OK]
000:07:0 0x10b9 0x1533
[OK]
000:08:0 0x10b9 0x5451
10h port 0x00008400 0x00000100
14h mem 0xf4015000 0x00001000
[OK]
000:10:0 0x104c 0xac50
10h mem 0x00000000 0x00001000
[NG]
000:11:0 0x10ec 0x8139
10h port 0x00008800 0x00000100
14h mem 0xf4017800 0x00000100
[OK]
000:12:0 0x14f1 0x2f00
10h mem 0xf4000000 0x00010000
14h port 0x00008098 0x00000008
[OK]
000:15:0 0x10b9 0x5237
10h mem 0xf4016000 0x00001000
[OK]
000:16:0 0x10b9 0x5229
20h port 0x00008080 0x00000010
[OK]
000:17:0 0x10b9 0x7101
[OK]
000:19:0 0x104c 0x8023
10h mem 0xf4017000 0x00000800
14h mem 0xf4010000 0x00004000
[OK]
001:05:0 0x1002 0x4336
10h mem 0xf6000000 0x02000000
14h port 0x00009000 0x00000100
18h mem 0xf4100000 0x00010000
[OK]
--------------------------[ 1 devices bogus]
Physical memory end: 0x0effe000
PCI memory mapped I/O space start: 0x0f000000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x1002 0xcab0
10h mem 0xf8000000 0x04000000
14h mem 0xf4400000 0x00001000
18h port 0x00008090 0x00000004
[OK]
000:01:0 0x1002 0x700f
[OK]
000:02:0 0x10b9 0x5237
10h mem 0xf4014000 0x00001000
[OK]
000:07:0 0x10b9 0x1533
[OK]
000:08:0 0x10b9 0x5451
10h port 0x00008400 0x00000100
14h mem 0xf4015000 0x00001000
[OK]
000:10:0 0x104c 0xac50
10h mem 0x0f000000 0x00001000
[OK]
000:11:0 0x10ec 0x8139
10h port 0x00008800 0x00000100
14h mem 0xf4017800 0x00000100
[OK]
000:12:0 0x14f1 0x2f00
10h mem 0xf4000000 0x00010000
14h port 0x00008098 0x00000008
[OK]
000:15:0 0x10b9 0x5237
10h mem 0xf4016000 0x00001000
[OK]
000:16:0 0x10b9 0x5229
20h port 0x00008080 0x00000010
[OK]
000:17:0 0x10b9 0x7101
[OK]
000:19:0 0x104c 0x8023
10h mem 0xf4017000 0x00000800
14h mem 0xf4010000 0x00004000
[OK]
001:05:0 0x1002 0x4336
10h mem 0xf6000000 0x02000000
14h port 0x00009000 0x00000100
18h mem 0xf4100000 0x00010000
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ATI Technologies product 0xcab0 (rev. 0x13)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: ATI Technologies product 0x700f (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: ATI Technologies product 0x4336 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ohci0 at pci0 dev 2 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x02)
autri0: interrupting at irq 5
autri0: ADS99 codec; headphone, Analog Devices Phat Stereo
audio0 at autri0: full duplex, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
cbb0 at pci0 dev 10 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x02)
cbb0: NOT USED because of unconfigured interrupt
rtk0 at pci0 dev 11 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:08:02:d0:4a:8c
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Conexant Systems product 0x2f00 (miscellaneous communications, revision 0x01) at pci0 dev 12 function 0 not configured
ohci1 at pci0 dev 15 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci1: interrupting at irq 11
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pciide0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23DA-30>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 28615 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4240N, , 0109> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 17 function 0 not configured
Texas Instruments product 0x8023 (Firewire serial bus, interface 0x10) at pci0 dev 19 function 0 not configured
isa0 at pcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask ef55 netmask ef55 ttymask ffd7
pcic0: controller 0 detecting irqs with mask 0xdeb8:..4..9..10
pcic0: using irq 4 for socket events
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
rtk0: watchdog timeout
rtk0: watchdog timeout
rtk0: watchdog timeout
rtk0: watchdog timeout
rtk0: watchdog timeout
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
rtk0: watchdog timeout
------- =_aaaaaaaaaa0
Content-Type: text/plain; name="dmesg.ROADTRIP"; charset="us-ascii"
Content-ID: <1447.1035738908.4@capo.xnet.duzan.org>
Content-Description: dmesg.ROADTRIP
NetBSD 1.6I (ROADTRIP) #2: Sat Oct 26 20:02:15 EDT 2002
gary@capo:/usr/src/sys/arch/i386/compile/ROADTRIP
total memory = 239 MB
avail memory = 219 MB
using 3091 buffers containing 12364 KB of memory
BIOS32 rev. 0 found at 0xfd760
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP 1500+ (686-class), 1325.22 MHz
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ATI Technologies product 0xcab0 (rev. 0x13)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: ATI Technologies product 0x700f (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: ATI Technologies product 0x4336 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Acer Labs M5237 USB Host Controller (USB serial bus, interface 0x10, revision 0x03) at pci0 dev 2 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x02)
autri0: interrupting at irq 5
autri0: Analog Devices AD1886A codec; headphone, Analog Devices Phat Stereo
audio0 at autri0: full duplex, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
cbb0 at pci0 dev 10 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x02)
cbb0: NOT USED because of unconfigured interrupt
rtk0 at pci0 dev 11 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:08:02:d0:4a:8c
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Conexant Systems product 0x2f00 (miscellaneous communications, revision 0x01) at pci0 dev 12 function 0 not configured
Acer Labs M5237 USB Host Controller (USB serial bus, interface 0x10, revision 0x03) at pci0 dev 15 function 0 not configured
pciide0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23DA-30>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 28615 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4240N, , 0109> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 17 function 0 not configured
Texas Instruments TSB43AA22/A OHCI IEEE 1394 Host Controller (Firewire serial bus, interface 0x10) at pci0 dev 19 function 0 not configured
isa0 at pcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
apm0 at mainbus0: Power Management spec V1.2
apm0: A/C state: on
apm0: battery charge state: no battery
biomask e755 netmask ef55 ttymask ffd7
pcic0: controller 0 detecting irqs with mask 0xdeb8:..4..9
pcic0: using irq 4 for socket events
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
rtk0: watchdog timeout
rtk0: watchdog timeout
rtk0: watchdog timeout
rtk0: watchdog timeout
rtk0: watchdog timeout
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
------- =_aaaaaaaaaa0--