After a remarkable amount of yak shaving, I've managed to get NetBSD
1.6 installed on an RLX server blade.  Everything seems to be fine,
but there are "device not configured" boot messages that I'm hoping
someone who's seen a transmeta processor before can shed some light
on:

Transmeta Corp SDRAM Controller (RAM memory) at pci0 dev 0 function 1 not configured
Transmeta Corp BIOS Scratchpad (RAM memory) at pci0 dev 0 function 2 not configured

Complete boot messages follow, for the curious:

>> NetBSD/i386 BIOS Boot, Revision 2.12
>> (autobuild@tgm.daemon.org, Sun Sep  8 19:22:29 UTC 2002)
>> Memory: 622/506816 k
Press return to boot now, any other key for boot menu
booting hd0a:netbsd - starting in 0 
5454176+112040+341476 [304304+255616]=0x62c1e0
[ using 560372 bytes of netbsd ELF symbol table ]
BIOS CFG: Model-SubM-Rev: fc-01-00, 0x74<EBDA,KBDINT,RTC,IC2>
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6 (GENERIC_SERIAL) #0: Thu Oct 10 10:00:46 EDT 2002
    root@foiegras:/usr/src/sys/arch/i386/compile/GENERIC_SERIAL
cpu0: Transmeta Crusoe (586-class), 633.55 MHz
cpu0: Processor revision 1.3.2.0
cpu0: Code Morphing Software Rev: 4.1.7-7-95
cpu0: 20001013 08:04 official release 4.1.7#3
cpu0: LongRun mode: 1  <633MHz 1600mV 100%>
cpu0: features 84803f<FPU,VME,DE,PSE,TSC,MSR>
cpu0: features 84803f<CMOV,PN,MMX>
cpu0: serial number 0000-0543-0000-293D-0115-554E
total memory = 495 MB
avail memory = 453 MB
using 6144 buffers containing 25472 KB of memory
BIOS32 rev. 0 found at 0xfd7b0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Transmeta Corp LongRun Northbridge (rev. 0x00)
Transmeta Corp SDRAM Controller (RAM memory) at pci0 dev 0 function 1 not configured
Transmeta Corp BIOS Scratchpad (RAM memory) at pci0 dev 0 function 2 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
fxp0 at pci0 dev 9 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:42:52:00:14:32
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci0 dev 10 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at irq 10
fxp1: Ethernet address 00:42:52:00:14:33
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2 at pci0 dev 11 function 0: i82559 Ethernet, rev 8
fxp2: interrupting at irq 7
fxp2: Ethernet address 00:42:52:00:14:34
inphy2 at fxp2 phy 1: i82555 10/100 media interface, rev. 4
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pciide0 at pci0 dev 15 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IC25N020ATCX04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 17 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
biomask f367 netmask ffe7 ttymask ffe7
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
Wed Oct  9 14:03:42 GMT 2002 
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
/dev/rwd0a: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0h: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: dh-install-9
IPv6 mode: host
Configuring network interfaces: fxp2.
add net default: gateway 140.245.65.1
Adding interface aliases:
Building databases...
wsconscfg: /dev/ttyEcfg: Device not configured
wsconscfg: /dev/ttyEcfg: Device not configured
wsconscfg: /dev/ttyEcfg: Device not configured
wsconscfg: /dev/ttyEcfg: Device not configured
Starting syslogd.
Checking for core dump...
savecore: no core dump
Mounting all filesystems...
Clearing /tmp.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Starting virecover.
starting local daemons:.
Updating motd.
Starting inetd.
Starting cron.
Wed Oct  9 10:03:51 EDT 2002
Oct  9 10:03:53
NetBSD/i386 (dh-install-9) (console)

login: