Subject: Some Vaio Problems
To: None <port-i386@netbsd.org>
From: None <TonyIsYourPal@netscape.net>
List: port-i386
Date: 03/06/2002 09:05:27
---------60be22eb57a34f060be22eb57a34f0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
Content-Disposition: inline
Hi everyone,
I've been using NetBSD on a couple of different boxes for a few years (Amigas, PCs), and had 1.5.1 working fine on a Thinkpad 560. However, I've recently installed 1.5.2 on a Sony Vaio PCG-FX401, and am having a couple of odd problems with it ...
1) Sound. The sound chip is reported as a "VIA82C686A AC'97 Audio (rev 0x50)" on startup. Sound works fine under WinXP and Linux, but under NetBSD it's like a scratched record; the first couple of seconds of sound play over and over for the correct length of the MP3 (say). Same results whether using mpg123, Linux RealPlayer, audioplay, or cat'ing to the audio device. This seems to be a fairly common chip, so I can't think everybody's got this problem with it...
2) mbufs. Every couple of days, something somewhere starts chewing through mbufs at the rate of three-four headers every 5 seconds (according to systat), and after a couple of minutes networking locks solid. Sometimes the mbufs get deallocated, but it seems fairly random, and the only sure way to get things back on track is a reboot. What's the best way to work out what process(es) are allocating mbufs ?
Other info: the 1.5.1 generic kernels just wouldn't boot on the Vaio at all, and that's why I upgraded to 1.5.2. Using a bootable Linux CD will also lock solid unless you can interrupt the boot process an use "expert noauto" to stop Linux trying to autodetect hardware. The oddness seems to centre around Cardbus support on the machine (I sometimes get "Bad Vcc" error messages on shutdown; Linux locks autodetecting PCMCIA gear).
Apart from the sound and mbufs problems, everything is pretty solid !
I've attached my config file and dmesg output, in case it gives somebody a clue what's going on here.
Thanks for any help,
- Tony
--
__________________________________________________________________
Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/
Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/
---------60be22eb57a34f060be22eb57a34f0
Content-Type: text/plain; charset=iso-8859-1; name="FLAGON"
Content-Transfer-Encoding: 8bit
Content-Disposition: inline; filename="FLAGON"
Content-Description: FLAGON
# $NetBSD: CARDBUS,v 1.14.2.10 2001/05/06 15:19:39 he Exp $
#
# CARDBUS -- GENERIC + CardBus support
# from: GENERIC,v 1.358 2000/07/05 04:07:25 sommerfeld Exp
#
include "arch/i386/conf/std.i386"
maxusers 32 # estimated number of users
# CPU support. At least one is REQUIRED.
#options I386_CPU
#options I486_CPU
#options I586_CPU
options I686_CPU
# CPU-related options.
options MATH_EMULATE # floating point emulation
options VM86 # virtual 8086 emulation
options USER_LDT # user-settable LDT; used by WINE
# eliminate delay no-ops in I/O; recommended on all but very old machines
options DUMMY_NOPS
# delay between "rebooting ..." message and hardware reset, in milliseconds
#options CPURESET_DELAY=2000
# This option allows you to force a serial console at the specified
# I/O address. see console(4) for details.
#options "CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600
# you don't want the option below ON iff you are using the
# serial console option of the new boot strap code.
#options CONS_OVERRIDE # Always use above! independent of boot info
# The following options override the memory sizes passed in from the boot
# block. Use them *only* if the boot block is unable to determine the correct
# values. Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options REALBASEMEM=639 # size of base memory (in KB)
#options REALEXTMEM=15360 # size of extended memory (in KB)
# Standard system options
# we might want this too !
#options PCIC_ISA_INTR_ALLOC_MASK=0xff5f
options UCONSOLE # users can use TIOCCONS (for xconsole)
options INSECURE # disable kernel security levels
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing via ktrace(1)
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
options SYSVSHM # System V-like memory sharing
options SHMMAXPGS=16384 # 1024 pages is the default
options NMBCLUSTERS=768
options NBUF=2048
options LKM # loadable kernel modules
# we've got loads of hardware - have a big msgbuf...
options MSGBUFSIZE=65536
# Diagnostic/debugging support options
options DIAGNOSTIC # expensive kernel consistency checks
#options DEBUG # expensive debugging checks/support
options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
#options KGDB # remote debugger
#options "KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
options COMPAT_09 # NetBSD 0.9,
options COMPAT_10 # NetBSD 1.0,
options COMPAT_11 # NetBSD 1.1,
options COMPAT_12 # NetBSD 1.2,
options COMPAT_13 # NetBSD 1.3,
options COMPAT_14 # NetBSD 1.4,
options COMPAT_43 # and 4.3BSD
#options COMPAT_386BSD_MBRPART # recognize old partition ID
options COMPAT_SVR4 # binary compatibility with SVR4
options COMPAT_IBCS2 # binary compatibility with SCO and ISC
options COMPAT_LINUX # binary compatibility with Linux
options COMPAT_FREEBSD # binary compatibility with FreeBSD
options COMPAT_PECOFF # kernel support for Win32 apps
options COMPAT_AOUT # binary compat for NetBSD a.out binaries
# File systems
file-system FFS # UFS
file-system EXT2FS # second extended file system (linux)
file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network File System client
file-system NTFS # Windows/NT file system (experimental)
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
file-system OVERLAY # overlay file system
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
file-system CODA # Coda File System; also needs vcoda (below)
# File system options
options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independent support
options SOFTDEP # FFS soft updates support.
options NFSSERVER # Network File System server
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Networking options
#options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
options NS # XNS
#options NSIP # XNS tunneling over IP
options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
options CCITT,LLC,HDLC # X.25
options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended.
#options TCP_COMPAT_42
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options EISAVERBOSE # verbose EISA device autoconfig messages
options MIIVERBOSE # verbose PHY autoconfig messages
options PCIVERBOSE # verbose PCI device autoconfig messages
options PCI_CONFIG_DUMP # verbosely dump PCI config space
options PCMCIAVERBOSE # verbose PCMCIA configuration messages
options SCSIVERBOSE # human readable SCSI error messages
options USBVERBOSE # verbose USB device autoconfig messages
options PNPBIOSVERBOSE # verbose PnP BIOS messages
options PNPBIOSDEBUG # more fullsome Pnp BIOS debugging messages
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
#
# wscons options
#
# builtin terminal emulations
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options WS_KERNEL_FG=WSCOL_GREEN
#options WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
options WSDISPLAY_COMPAT_USL # VT handling
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options PCDISPLAY_SOFTCURSOR
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
mainbus0 at root
apm0 at mainbus0 # Advanced power management
# Tuning for power management, see apm(4) for more details.
#options APM_NO_IDLE # Don't call BIOS CPU idle function
#options APM_V10_ONLY # Use only the APM 1.0 calls
#options APM_NO_POWEROFF # Don't power off on halt(8)
#options APM_POWER_PRINT # Print stats on the console
#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
# Basic Bus Support
# Plug-and-Play BIOS and attached devices
#pnpbios* at mainbus?
# mainboard audio chips
#ess* at pnpbios? index ? # ESS AudioDrive
#sb* at pnpbios? index ? # NeoMagic 256AV in sb mode
#wss* at pnpbios? index ? # NeoMagic 256AV in wss mode
#ym* at pnpbios? index ? # OPL3-SA3
# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
# will be no com0. A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
#com* at pnpbios? index ? # serial ports
# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
#lpt* at pnpbios? index ? # parallel ports
#pckbc* at pnpbios? index ? # PC keyboard/mouse controller
#fdc* at pnpbios? index ? # floppy controller
# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide* at pnpbios? index ?
# PCI bus support
pci* at mainbus? bus ?
pci* at pchb? bus ?
pci* at ppb? bus ?
# Configure PCI using BIOS information
options PCIBIOS # PCI BIOS support
options PCIBIOSVERBOSE # PCI BIOS verbose info
options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
options PCIBIOS_INTR_GUESS # see pcibios(4)
options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
# PCI bridges
pchb* at pci? dev ? function ? # PCI-Host bridges
pceb* at pci? dev ? function ? # PCI-EISA bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
ppb* at pci? dev ? function ? # PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
puc* at pci? dev ? function ? # PCI "universal" comm. cards
# EISA bus support
eisa* at mainbus?
eisa* at pceb?
# ISA bus support
isa* at mainbus?
isa* at pceb?
isa* at pcib?
# PCMCIA bus support
pcmcia* at pcic? controller ? socket ?
pcmcia* at tcic? controller ? socket ?
# ISA PCMCIA controllers
pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
# PCI PCMCIA controllers
pcic0 at pci? dev? function ?
# ISA Plug-and-Play bus support
isapnp0 at isa?
# ISA Plug-and-Play PCMCIA controllers
pcic* at isapnp?
# CardBus bridge support
cbb* at pci? dev ? function ?
cardslot* at cbb?
# CardBus bus support
cardbus* at cardslot?
pcmcia* at cardslot?
# Coprocessor Support
# Math Coprocessor support
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
# Console Devices
# ISA console
#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
# Keyboard layout configuration for pccons
#options FRENCH_KBD
#options FINNISH_KBD
#options GERMAN_KBD
#options NORWEGIAN_KBD
# pccons-specific options:
#options XSERVER_DDB # PF12 gets you into DDB when X is running
#options XSERVER # X server support
# wscons
pckbc0 at isa? # pc keyboard controller
pckbd* at pckbc? # PC keyboard
# "opms" should not be enabled together with "pms" or "pmsi"
pms* at pckbc? # PS/2 mouse for wsmouse
pmsi* at pckbc? # PS/2 "Intelli"mouse for wsmouse
#opms* at pckbc? # backwards compatible PS/2 mouse
vga0 at isa?
vga* at pci? dev ? function ?
pcdisplay0 at isa? # CGA, MDA, EGA, HGA
wsdisplay* at vga? console ?
wsdisplay* at pcdisplay? console ?
wskbd* at pckbd? console ?
wsmouse* at pms? mux 0
wsmouse* at pmsi? mux 0
pcppi0 at isa?
sysbeep0 at pcppi?
# Serial Devices
# PCI serial interfaces
com* at puc? port ? # 16x50s on "universal" comm boards
cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards
# ISA Plug-and-Play serial interfaces
com* at isapnp? # Modems and serial boards
# PCMCIA serial interfaces
com* at pcmcia? function ? # Modems and serial cards
pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
com* at pcmcom? slave ? # ...and the slave devices
# CardBus serial interfaces
com* at cardbus? dev ? function ? # Modems and serial cards
# ISA serial interfaces
#options COM_HAYESP # adds Hayes ESP serial board support
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
com1 at isa? port 0x2f8 irq 3
com2 at isa? port 0x3e8 irq 5
#com3 at isa? port 0x2e8 irq 9
#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
#com* at ast? slave ?
#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards (BB2016)
#boca1 at isa? port 0x140 irq 5 # this line is also needed for BB2016
#com* at boca? slave ?
#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
#com* at tcom? slave ?
#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
#com* at rtfps? slave ?
#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards
#addcom0 at isa? port 0x108 irq 5 # Addonics FlexPort 8S
#com* at addcom? slave ?
# Parallel Printer Interfaces
# PCI parallel printer interfaces
lpt* at puc? port ? # || ports on "universal" comm boards
# ISA parallel printer interfaces
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
lpt1 at isa? port 0x278
lpt2 at isa? port 0x3bc
# Hardware monitors
# LM7[89] and compatible hardware monitors
#lm0 at isa? port 0x290 # other common ports: 0x280, 0x310
# VIA VT82C686A hardware monitor
viapm* at pci? dev ? function ?
viaenv* at viapm?
# SCSI Controllers and Devices
# PCI SCSI controllers
adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
bha* at pci? dev ? function ? # BusLogic 9xx SCSI
dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID
isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel
#ncr* at pci? dev ? function ? # NCR 53c8xx SCSI (old driver)
siop* at pci? dev ? function ? # Symbios 53c8xx SCSI
pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
# EISA SCSI controllers
ahb* at eisa? slot ? # Adaptec 174[02] SCSI
ahc* at eisa? slot ? # Adaptec 274x, aic7770 SCSI
bha* at eisa? slot ? # BusLogic 7xx SCSI
dpt* at eisa? slot ? # DPT EATA SCSI
uha* at eisa? slot ? # UltraStor 24f SCSI
# PCMCIA SCSI controllers
aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI
# ISA Plug-and-Play SCSI controllers
aha* at isapnp? # Adaptec AHA-154[02
aic* at isapnp? # Adaptec AHA-1520B
# ISA SCSI controllers
adv0 at isa? port ? irq ? drq ? # AdvanSys APB-514[02]
aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI
aha1 at isa? port 0x334 irq ? drq ?
ahc0 at isa? port ? irq ? # Adaptec 284x SCSI
aic0 at isa? port 0x340 irq 11 # Adaptec 152[02] SCSI
bha0 at isa? port 0x330 irq ? drq ? # BusLogic [457]4X SCSI
bha1 at isa? port 0x334 irq ? drq ?
# The "nca" and "dpt" probes might give false hits or hang your machine.
#dpt0 at isa? port 0x170 irq ? drq ? # DPT SmartCache/SmartRAID
#nca0 at isa? port 0x360 irq 15 # Port-mapped NCR 53C80 contoller
#nca1 at isa? iomem 0xd8000 irq 5 # Memory-mapped controller (T128, etc.)
sea0 at isa? iomem 0xc8000 irq 5 # Seagate/Future Domain SCSI
uha0 at isa? port 0x330 irq ? drq ? # UltraStor [13]4f SCSI
uha1 at isa? port 0x340 irq ? drq ?
wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 controllers
wds1 at isa? port 0x358 irq 11 drq 5
# CardBus SCSI cards
ahc* at cardbus? dev ? function ? # Adaptec ADP-1480
# SCSI bus support
scsibus* at adv?
scsibus* at adw?
scsibus* at aha?
scsibus* at ahb?
scsibus* at ahc?
scsibus* at aic?
scsibus* at bha?
scsibus* at dpt?
scsibus* at esp?
scsibus* at isp?
#scsibus* at nca?
#scsibus* at ncr?
scsibus* at pcscp?
scsibus* at sea?
scsibus* at siop?
scsibus* at uha?
scsibus* at wds?
# SCSI devices
sd* at scsibus? target ? lun ? # SCSI disk drives
st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ch* at scsibus? target ? lun ? # SCSI autochangers
ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
ss* at scsibus? target ? lun ? # SCSI scanners
uk* at scsibus? target ? lun ? # SCSI unknown
# RAID controllers and devices
cac* at pci? dev ? function ? # Compaq array controller
ca* at cac? unit ? # Compaq array disk device
# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0000
# ISA Plug-and-Play IDE controllers
wdc* at isapnp?
# PCMCIA IDE controllers
wdc* at pcmcia? function ?
# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
wdc1 at isa? port 0x170 irq 15 flags 0x00
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd* at wdc? channel ? drive ? flags 0x0000
wd* at pciide? channel ? drive ? flags 0x0000
# ATAPI bus support
atapibus* at wdc? channel ?
atapibus* at pciide? channel ?
# ATAPI devices
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# Miscellaneous mass storage devices
# ISA floppy
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fdc1 at isa? port 0x370 irq ? drq ?
fd* at fdc? drive ? # the drives themselves
# some machines need you to do this instead of fd*
#fd0 at fdc0 drive 0
# ISA CD-ROM devices
#mcd0 at isa? port 0x300 irq 10 # Mitsumi CD-ROM drives
# ISA tape devices
# note: the wt driver conflicts unpleasantly with SMC boards at the
# same I/O address. The probe reprograms their EEPROMs. Don't
# uncomment it unless you are actually using it.
#wt0 at isa? port 0x308 irq 5 drq 1 # Archive and Wangtek QIC tape drives
# Network Interfaces
# PCI network interfaces
de* at pci? dev ? function ? # DEC 21x4x-based Ethernet
en* at pci? dev ? function ? # ENI/Adaptec ATM
ep* at pci? dev ? function ? # 3Com 3c59x
ex* at pci? dev ? function ? # 3Com 90x[B]
epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
esh* at pci? dev ? function ? # Essential HIPPI card
fpa* at pci? dev ? function ? # DEC DEFPA FDDI
fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
le* at pci? dev ? function ? # PCnet-PCI Ethernet
lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
ne* at pci? dev ? function ? # NE2000-compatible Ethernet
ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
rtk* at pci? dev ? function ? # Realtek 8129/8139
sip* at pci? dev ? function ? # SiS 900 Ethernet
ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet
tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet
#options TLP_MATCH_21040
#options TLP_MATCH_21041
#options TLP_MATCH_21140
#options TLP_MATCH_21142
vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
# EISA network interfaces
ep* at eisa? slot ? # 3Com 3c579 Ethernet
fea* at eisa? slot ? # DEC DEFEA FDDI
tlp* at eisa? slot ? # DEC DE-425 Ethernet
# ISA Plug-and-Play network interfaces
ep* at isapnp? # 3Com 3c509 Ethernet
ne* at isapnp? # NE2000-compatible Ethernet
tr* at isapnp? # IBM/3COM TROPIC Token-Ring
# PCMCIA network interfaces
an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11)
awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)
cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer
ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
mbe* at pcmcia? function ? # MB8696x based Ethernet
ne* at pcmcia? function ? # NE2000-compatible Ethernet
ray* at pcmcia? function ? # Raytheon Raylink (802.11)
sm* at pcmcia? function ? # Megahertz Ethernet
wi* at pcmcia? function ? # Lucent WaveLan IEEE (802.11)
xi* at pcmcia? function ? # Xircom CreditCard Ethernet
mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
com* at mhzc?
sm* at mhzc?
# ISA network interfaces
ate0 at isa? port 0x2a0 irq ? # AT1700
cs0 at isa? port 0x300 iomem ? irq ? drq ? # CS8900 Ethernet
ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
eg0 at isa? port 0x280 irq 9 # 3C505 ethernet cards
el0 at isa? port 0x300 irq 9 # 3C501 ethernet cards
ep* at isa? port ? irq ? # 3C509 ethernet cards
ef0 at isa? port 0x360 iomem 0xd0000 irq 7 # 3C507
ai0 at isa? port 0x360 iomem 0xd0000 irq 7 # StarLAN
fmv0 at isa? port 0x2a0 irq ? # FMV-180 series
ix0 at isa? port 0x300 irq 10 # EtherExpress/16
iy0 at isa? port 0x360 irq ? # EtherExpress PRO 10 ISA
lc0 at isa? port 0x320 iomem ? irq ? # DEC EtherWORKS III (LEMAC)
#depca0 at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5 # DEPCA
#le* at depca?
nele0 at isa? port 0x320 irq 9 drq 7 # NE2100
le* at nele?
#ntwoc0 at isa? port 0x300 irq 5 iomem 0xc8000 flags 1 # Riscom/N2 sync serial
bicc0 at isa? port 0x320 irq 10 drq 7 # BICC IsoLan
le* at bicc?
ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
ne1 at isa? port 0x300 irq 10
sm0 at isa? port 0x300 irq 10 # SMC91C9x Ethernet
tr0 at isa? port 0xa20 iomem 0xd8000 irq ? # IBM TROPIC based Token-Ring
tr1 at isa? port 0xa24 iomem 0xd0000 irq ? # IBM TROPIC based Token-Ring
tr* at isa? port ? irq ? # 3COM TROPIC based Token-Ring
we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
we1 at isa? port 0x300 iomem 0xcc000 irq 10
# CardBus network cards
ex* at cardbus? dev ? function ? # 3Com 3C575TX
fxp* at cardbus? dev ? function ? # Intel i8255x
rtk* at cardbus? dev ? function ? # Realtek 8129/8139
tlp* at cardbus? dev ? function ? # DECchip 21143
# MII/PHY support
dmphy* at mii? phy ? # Davicom DM9101 PHYs
exphy* at mii? phy ? # 3Com internal PHYs
icsphy* at mii? phy ? # Integrated Circuit Systems ICS1890
inphy* at mii? phy ? # Intel 82555 PHYs
iophy* at mii? phy ? # Intel 82553 PHYs
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
nsphy* at mii? phy ? # NS83840 PHYs
nsphyter* at mii? phy ? # NS83843 PHYs
qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
tlphy* at mii? phy ? # ThunderLAN PHYs
tqphy* at mii? phy ? # TDK Semiconductor PHYs
ukphy* at mii? phy ? # generic unknown PHYs
# USB Controller and Devices
# PCI USB controllers
ohci* at pci? dev ? function ? # Open Host Controller
uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
# CardBus USB controllers
ohci* at cardbus? dev ? function ? # Open Host Controller
# USB bus support
usb* at ohci?
usb* at uhci?
# USB Hubs
uhub* at usb?
uhub* at uhub? port ? configuration ? interface ?
# USB Mice
ums* at uhub? port ? configuration ? interface ?
wsmouse* at ums? mux 0
# USB Keyboards
ukbd* at uhub? port ? configuration ? interface ?
wskbd* at ukbd? console ? mux 1
# USB Generic HID devices
uhid* at uhub? port ? configuration ? interface ?
# USB Printer
ulpt* at uhub? port ? configuration ? interface ?
# USB Modem
umodem* at uhub? port ? configuration ?
ucom* at umodem?
# USB Mass Storage
umass* at uhub? port ? configuration ? interface ?
atapibus* at umass? channel ?
scsibus* at umass? channel ?
# USB audio
uaudio* at uhub? port ? configuration ?
# USB Ethernet adapters
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
cue* at uhub? port ? # CATC USB-EL1201A based adapters
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
# Prolofic PL2301/PL2302 host-to-host adapter
upl* at uhub? port ?
# Serial adapters
# FTDI FT8U100AX serial adapter
#uftdi* at uhub? port ?
#ucom* at uftdi? portno ?
# Diamond Multimedia Rio 500
urio* at uhub? port ?
# USB Handspring Visor
uvisor* at uhub? port ?
ucom* at uvisor?
# USB Generic driver
ugen* at uhub? port ?
# Audio Devices
# PCI audio devices
auvia* at pci? dev ? function ? # VIA VT82C686A integrated AC'97 Audio
clcs* at pci? dev ? function ? # Cirrus Logic CS4280
clct* at pci? dev ? function ? # Cirrus Logic CS4281
cmpci* at pci? dev ? function ? # C-Media CMI8338/8738
eap* at pci? dev ? function ? # Ensoniq AudioPCI
eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
fms* at pci? dev ? function ? # Forte Media FM801
neo* at pci? dev ? function ? # NeoMagic 256 AC'97 Audio
sv* at pci? dev ? function ? # S3 SonicVibes
# ISA Plug-and-Play audio devices
ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio
guspnp* at isapnp? # Gravis Ultra Sound PnP audio
sb* at isapnp? # SoundBlaster-compatible audio
wss* at isapnp? # Windows Sound System
ym* at isapnp? # Yamaha OPL3-SA3 audio
# ISA audio devices
# the "aria" probe might give false hits
#aria0 at isa? port 0x290 irq 10 # Aria
#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX
gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra Sound
pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio Spectrum
pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System
sp0 at pss0 port 0x530 irq 10 drq 0 # sound port driver
sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster
wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound System
#cms0 at isa? port 0x220 # Creative Music System
# OPL[23] FM synthesizers
#opl0 at isa? port 0x388 # use only if not attached to sound card
opl* at eso?
opl* at ess?
opl* at fms?
opl* at sb?
opl* at sv?
opl* at wss?
opl* at ym?
# Audio support
#audio* at aria?
audio* at auvia?
audio* at clcs?
audio* at clct?
audio* at cmpci?
audio* at eap?
audio* at eso?
audio* at ess?
audio* at fms?
audio* at gus?
audio* at guspnp?
audio* at neo?
audio* at pas?
audio* at sb?
audio* at sp?
audio* at sv?
audio* at uaudio?
audio* at wss?
audio* at ym?
# MPU 401 UARTs
#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card
mpu* at eso?
mpu* at fms?
mpu* at sb?
mpu* at ym?
# MIDI support
#midi* at cms? # Creative Music System
midi* at clcs? # Cirrus Logic CS3280 MIDI port
#midi* at clct? # Cirrus Logic CS4281 MIDI port
midi* at eap? # 137[01] MIDI port
midi* at mpu? # MPU 401
midi* at opl? # OPL FM synth
midi* at pcppi? # MIDI interface to the PC speaker
midi* at sb? # SB1 MIDI port
# The spkr driver provides a simple tone interface to the built in speaker.
spkr0 at pcppi? # PC speaker
# TV cards
# Brooktree 848/849/878/879 based TV cards
bktr* at pci? dev ? function ?
# Mice
# ISA busmice
lms0 at isa? port 0x23c irq 5 # Logitech bus mouse
lms1 at isa? port 0x238 irq 5
mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
mms1 at isa? port 0x238 irq 5
wsmouse* at lms? mux 0
wsmouse* at mms? mux 0
# backwards compatible versions
#olms0 at isa? port 0x23c irq 5 # Logitech bus mouse
#olms1 at isa? port 0x238 irq 5
#omms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
#omms1 at isa? port 0x238 irq 5
#opms0 at pc? irq 12 # PS/2 auxiliary port mouse
# Joysticks
# ISA Plug-and-Play joysticks
joy* at isapnp? # Game ports (usually on audio cards)
# PCI joysticks
joy* at pci? # Game ports (usually on audio cards)
# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201
# Miscellaneous Devices
# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1
# Pull in optional local configuration
include "arch/i386/conf/GENERIC.local"
# Pseudo-Devices
# disk/mass storage pseudo-devices
pseudo-device ccd 4 # concatenated/striped disk devices
#pseudo-device raid 4 # RAIDframe disk driver
#options RAID_AUTOCONFIG # auto-configuration of RAID components
pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
# network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
pseudo-device sl 2 # Serial Line IP
pseudo-device strip 2 # Starmode Radio IP (Metricom)
pseudo-device tun 2 # network tunneling over tty
pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003)
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
pseudo-device vlan # IEEE 802.1q encapsulation
# miscellaneous pseudo-devices
pseudo-device pty 64 # pseudo-terminals
pseudo-device tb 1 # tablet line discipline
pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
# a pseudo device needed for Coda # also needs CODA (above)
pseudo-device vcoda 4 # coda minicache <-> venus comm.
# mouse & keyboard multiplexor pseudo-devices
pseudo-device wsmux 2
---------60be22eb57a34f060be22eb57a34f0
Content-Type: text/plain; charset=iso-8859-1; name="dmesg.out"
Content-Transfer-Encoding: 8bit
Content-Disposition: inline; filename="dmesg.out"
Content-Description: dmesg.out
NetBSD 1.5.2 (FLAGON) #8: Tue Mar 5 14:11:31 GMT 2002
root@flagon:/usr/src/sys/arch/i386/compile/FLAGON
cpu0: AMD K7 (Athlon) (686-class), 800.07 MHz
total memory = 126 MB
avail memory = 112 MB
using 1645 buffers containing 6580 KB of memory
BIOS32 rev. 0 found at 0xfd6a0
PCI BIOS rev. 2.1 found at 0xfd7cd
pcibios: config mechanism [1][x], special cycles [x][x], last bus 1
PCI IRQ Routing Table rev. 1.0 found at 0xfdf60, size 128 bytes (6 entries)
PCI Interrupt Router at 000:07:0 (VIA Technologies VT82C596A (Apollo Pro) PCI-ISA Bridge)
PIR Entry 0:
Bus: 0 Device: 7
INTA: link 0x55 bitmap 0x9eb8
INTB: link 0x56 bitmap 0x9eb8
INTC: link 0x56 bitmap 0x9cb8
INTD: link 0x57 bitmap 0x06a0
PIR Entry 1:
Bus: 0 Device: 0
INTA: link 0x55 bitmap 0xdef8
INTB: link 0x56 bitmap 0xdef8
INTC: link 0x56 bitmap 0xdef8
INTD: link 0x57 bitmap 0xdef8
PIR Entry 2:
Bus: 0 Device: 1
INTA: link 0x56 bitmap 0x0020
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 3:
Bus: 0 Device: 10
INTA: link 0x55 bitmap 0x0020
INTB: link 0x56 bitmap 0x0020
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 4:
Bus: 0 Device: 16
INTA: link 0x56 bitmap 0x0400
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
PIR Entry 5:
Bus: 0 Device: 14
INTA: link 0x57 bitmap 0x0200
INTB: link 0x00 bitmap 0xdef8
INTC: link 0x00 bitmap 0xdef8
INTD: link 0x00 bitmap 0xdef8
pciintr_link_alloc: bus 0 device 7: link 0x55 invalid
pciintr_link_alloc: bus 0 device 7: link 0x56 invalid
pciintr_link_alloc: bus 0 device 7: link 0x56 invalid
pciintr_link_alloc: bus 0 device 7: link 0x57 invalid
pciintr_link_alloc: bus 0 device 0: link 0x55 invalid
pciintr_link_alloc: bus 0 device 0: link 0x56 invalid
pciintr_link_alloc: bus 0 device 0: link 0x56 invalid
pciintr_link_alloc: bus 0 device 0: link 0x57 invalid
pciintr_link_alloc: bus 0 device 1: link 0x56 invalid
pciintr_link_alloc: bus 0 device 10: link 0x55 invalid
pciintr_link_alloc: bus 0 device 10: link 0x56 invalid
pciintr_link_alloc: bus 0 device 16: link 0x56 invalid
pciintr_link_alloc: bus 0 device 14: link 0x57 invalid
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
pciintr_header_fixup: no entry for link 0x57 (0:7:2:D)
pciintr_header_fixup: no entry for link 0x57 (0:7:3:D)
pciintr_header_fixup: no entry for link 0x56 (0:7:5:C)
pciintr_header_fixup: no entry for link 0x56 (0:7:6:C)
pciintr_header_fixup: no entry for link 0x55 (0:10:0:A)
pciintr_header_fixup: no entry for link 0x56 (0:10:1:B)
pciintr_header_fixup: no entry for link 0x57 (0:14:0:A)
pciintr_header_fixup: no entry for link 0x56 (0:16:0:A)
------------------------------------------
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI bridge 2: primary 0, secondary 3, subordinate 3
PCI bus #3 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x1106 0x0305
10h mem 0xf0000000 0x08000000
[OK]
000:01:0 0x1106 0x8305
[OK]
000:07:0 0x1106 0x0686
[OK]
000:07:1 0x1106 0x0571
20h port 0x00001c40 0x00000010
[OK]
000:07:2 0x1106 0x3038
20h port 0x00001c00 0x00000020
[OK]
000:07:3 0x1106 0x3038
20h port 0x00001c20 0x00000020
[OK]
000:07:4 0x1106 0x3057
[OK]
000:07:5 0x1106 0x3058
10h port 0x00001000 0x00000100
14h port 0x00001c54 0x00000004
18h port 0x00001c50 0x00000004
[OK]
000:07:6 0x1106 0x3068
10h port 0x00001400 0x00000100
[OK]
000:10:0 0x104c 0xac51
10h mem 0x07f00000 0x00001000
[OK]
000:10:1 0x104c 0xac51
10h mem 0x07f01000 0x00001000
[OK]
000:14:0 0x104c 0x8020
10h mem 0xe8004000 0x00000800
14h mem 0xe8000000 0x00004000
[OK]
000:16:0 0x10ec 0x8139
10h port 0x00001800 0x00000100
14h mem 0xe8004800 0x00000100
[OK]
001:00:0 0x1002 0x4c4d
10h mem 0xe9000000 0x01000000
14h port 0x00009000 0x00000100
18h mem 0xe8100000 0x00001000
[OK]
--------------------------[ 0 devices bogus]
Physical memory end: 0x07eed000
PCI memory mapped I/O space start: 0x07f00000
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0: PCI configuration registers:
Common header:
0x00: 0x03051106 0x22100006 0x06000003 0x00000800
Vendor Name: VIA Technologies (0x1106)
Device ID: 0x0305
Command register: 0x0006
I/O space accesses: off
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x2210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: on
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: host (0x00)
Interface: 0x00
Revision ID: 0x03
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x08
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0xf0000008 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x80f6104d
0x30: 0x00000000 0x000000a0 0x00000000 0x00000000
Base address register at 0x10
type: 32-bit prefetchable memory
base: 0xf0000000, size: 0x08000000
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xa0
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Capability register at 0xa0
type: 0x02 (AGP, rev. 0.2)
Capability register at 0xc0
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0xb4fbf416 0x08088d47 0x0000e0e8 0x08080804
0x60: 0xe0cbaa3f 0x00001200 0x0f652c40 0x00007f00
0x70: 0x0ccc88d6 0x00e2810e 0x0211f401 0x01000000
0x80: 0x0000400f 0x00000080 0x00000002 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00001100
0xa0: 0x0020c002 0x1f000203 0x00000000 0x6300222b
0xb0: 0x5022dddb 0x0f00ff11 0x00000047 0x00000000
0xc0: 0x00020001 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000040 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00040300 0x00000022 0x00000000
Don't know how to pretty-print device-dependent header.
VIA Technologies product 0x0305 (host bridge, revision 0x03) at ? dev 0 function 0 (tag 0x80000000, intrtag 0x80000000, intrswiz 0, intrpin 0, i/o off, mem on, no quirks)
pchb0: VIA Technologies product 0x0305 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: PCI configuration registers:
Common header:
0x00: 0x83051106 0x22300007 0x06040000 0x00010000
Vendor Name: VIA Technologies (0x1106)
Device ID: 0x8305
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x2230
Capability List support: on
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: on
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: PCI (0x04)
Interface: 0x00
Revision ID: 0x00
BIST: 0x00
Header Type: 0x01 (0x01)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 1 (PCI-PCI bridge) header:
0x10: 0x00000000 0x00000000 0x00010100 0x00009090
0x20: 0xe9f0e810 0x0000fff0 0x00000000 0xffffffff
0x30: 0x00000000 0x00000080 0x00000000 0x000c0000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Primary bus number: 0x00
Secondary bus number: 0x01
Subordinate bus number: 0x01
Secondary bus latency timer: 0x00
Secondary status register: 0x0000
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: fast (0x0)
Signaled Target Abort: off
Received Target Abort: off
Received Master Abort: off
System Error: off
Parity Error: off
I/O region:
base register: 0x90
limit register: 0x90
base upper 16 bits register: 0x0000
limit upper 16 bits register: 0x0000
Memory region:
base register: 0xe810
limit register: 0xe9f0
Prefetchable memory region:
base register: 0xfff0
limit register: 0x0000
base upper 32 bits register: 0x00000000
limit upper 32 bits register: 0xffffffff
Reserved @ 0x34: 0x00000080
Expansion ROM Base Address: 0x00000000
Interrupt line: 0x00
Interrupt pin: 0x00 (none)
Bridge control register: 0x000c
Parity error response: off
Secondary SERR forwarding: off
ISA enable: on
VGA enable: on
Master abort reporting: off
Secondary bus reset: off
Fast back-to-back capable: off
Device-dependent header:
0x40: 0x4400cdcb 0x83057225 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x02020001 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
VIA Technologies product 0x8305 (PCI bridge) at ? dev 1 function 0 (tag 0x80000800, intrtag 0x80000800, intrswiz 0, intrpin 0, i/o on, mem on, no quirks): VIA Technologies product 0x8305 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: PCI configuration registers:
Common header:
0x00: 0x4c4d1002 0x02900087 0x03000064 0x00004208
Vendor Name: ATI Technologies (0x1002)
Device Name: Mach64 LM (0x4c4d)
Command register: 0x0087
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: on
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0290
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: display (0x03)
Subclass Name: VGA (0x00)
Interface: 0x00
Revision ID: 0x64
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x42
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0xe9000000 0x00009001 0xe8100000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x80f6104d
0x30: 0x00000000 0x00000050 0x00000000 0x00080105
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xe9000000, size: 0x01000000
Base address register at 0x14
type: i/o
base: 0x00009000, size: 0x00000100
Base address register at 0x18
type: 32-bit nonprefetchable memory
base: 0xe8100000, size: 0x00001000
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x50
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x08
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x05
Capability register at 0x50
type: 0x02 (AGP, rev. 0.1)
Capability register at 0x5c
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x0000000c 0x00000000 0x00000000 0x00000000
0x50: 0x00105c02 0xff000203 0x00000000 0x06010001
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies Mach64 LM (VGA display, revision 0x64) at ? dev 0 function 0 (tag 0x80010000, intrtag 0x80000800, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): ATI Technologies Mach64 LM (rev. 0x64)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0: PCI configuration registers:
Common header:
0x00: 0x06861106 0x02100087 0x06010040 0x00800000
Vendor Name: VIA Technologies (0x1106)
Device Name: VT82C686A (Apollo KX133) PCI-ISA Bridge (0x0686)
Command register: 0x0087
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: on
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: ISA (0x01)
Interface: 0x00
Revision ID: 0x40
BIST: 0x00
Header Type: 0x00+multifunction (0x80)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x80f6104d
0x30: 0x00000000 0x000000c0 0x00000000 0x00000000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xc0
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Capability register at 0xc0
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0xb0002000 0xe6020000 0x00c40101 0xf3000000
0x50: 0x0004760e 0x905a900e 0x00fc0200 0x00000050
0x60: 0x34103400 0x34303420 0x34400008 0x34603450
0x70: 0x00000000 0x82408040 0x00000000 0x00000000
0x80: 0x00000000 0x00000100 0x00006000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00020001 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00420000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (ISA bridge, revision 0x40) at ? dev 7 function 0 (tag 0x80003800, intrtag 0x80003800, intrswiz 0, intrpin 0, i/o on, mem on, no quirks)
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x40)
pciide0 at pci0 dev 7 function 1: PCI configuration registers:
Common header:
0x00: 0x05711106 0x02900007 0x01018a06 0x00000000
Vendor Name: VIA Technologies (0x1106)
Device Name: VT82C586A IDE Controller (0x0571)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0290
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: mass storage (0x01)
Subclass Name: IDE (0x01)
Interface: 0x8a
Revision ID: 0x06
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x00001c41 0x00000000 0x00000000 0x80f6104d
0x30: 0x00000000 0x000000c0 0x00000000 0x00000000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
type: i/o
base: 0x00001c40, size: 0x00000010
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xc0
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Capability register at 0xc0
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x3509020b 0x00c01c08 0x205e205e 0xffff0066
0x50: 0xe007e407 0x00000000 0xa8a8a8a8 0x00000000
0x60: 0x00000200 0x00000000 0x00000200 0x00000000
0x70: 0x00000102 0x00000000 0x00000102 0x00000000
0x80: 0x0009f160 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00020001 0x00000000 0x00000000 0x00000000
0xd0: 0x05710006 0x80f6104d 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
VIA Technologies VT82C586A IDE Controller (IDE mass storage, interface 0x8a, revision 0x06) at ? dev 7 function 1 (tag 0x80003900, intrtag 0x80003900, intrswiz 0, intrpin 0, i/o on, mem on, no quirks): VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23CA-15>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 14403 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 29498112 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <QSI DVD-ROM SDR-081, , ESC9> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: PCI configuration registers:
Common header:
0x00: 0x30381106 0x02100017 0x0c03001a 0x00000008
Vendor Name: VIA Technologies (0x1106)
Device Name: VT83C572 USB Controller (0x3038)
Command register: 0x0017
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: on
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: serial bus (0x0c)
Subclass Name: USB (0x03)
Interface: 0x00
Revision ID: 0x1a
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x00
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x00001c01 0x00000000 0x00000000 0x80f6104d
0x30: 0x00000000 0x00000080 0x00000000 0x00000409
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
type: i/o
base: 0x00001c00, size: 0x00000020
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x80
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x04 (pin D)
Interrupt line: 0x09
Capability register at 0x80
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00031200 0x0c3000c2 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000010 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00020001 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x0000003b 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x1a) at ? dev 7 function 2 (tag 0x80003a00, intrtag 0x80003a00, intrswiz 0, intrpin 0x4, i/o on, mem on, no quirks): VIA Technologies VT83C572 USB Controller (rev. 0x1a)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: PCI configuration registers:
Common header:
0x00: 0x30381106 0x02100017 0x0c03001a 0x00000008
Vendor Name: VIA Technologies (0x1106)
Device Name: VT83C572 USB Controller (0x3038)
Command register: 0x0017
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: on
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: serial bus (0x0c)
Subclass Name: USB (0x03)
Interface: 0x00
Revision ID: 0x1a
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x00
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x00001c21 0x00000000 0x00000000 0x80f6104d
0x30: 0x00000000 0x00000080 0x00000000 0x00000409
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
type: i/o
base: 0x00001c20, size: 0x00000020
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x80
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x04 (pin D)
Interrupt line: 0x09
Capability register at 0x80
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00031200 0xcc3000c6 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000010 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00020001 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000010 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x1a) at ? dev 7 function 3 (tag 0x80003b00, intrtag 0x80003b00, intrswiz 0, intrpin 0x4, i/o on, mem on, no quirks): VIA Technologies VT83C572 USB Controller (rev. 0x1a)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viapm0 at pci0 dev 7 function 4: PCI configuration registers:
Common header:
0x00: 0x30571106 0x02900000 0x06010040 0x00000000
Vendor Name: VIA Technologies (0x1106)
Device Name: VT82C686A SMBus Controller (0x3057)
Command register: 0x0000
I/O space accesses: off
Memory space accesses: off
Bus mastering: off
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0290
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: ISA (0x01)
Interface: 0x00
Revision ID: 0x40
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x80f6104d
0x30: 0x00000000 0x00000068 0x00000000 0x00000000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x68
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Capability register at 0x68
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00598c20 0x000040da 0x00008001 0x00000000
0x50: 0x80feff08 0x00000440 0x00ffff00 0x80f6104d
0x60: 0x00000000 0x00000000 0x00020001 0x00000000
0x70: 0x00006801 0x00000001 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00008101 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00010000 0x00400000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
VIA Technologies VT82C686A SMBus Controller (ISA bridge, revision 0x40) at ? dev 7 function 4 (tag 0x80003c00, intrtag 0x80003c00, intrswiz 0, intrpin 0, i/o off, mem off, no quirks)
auvia0 at pci0 dev 7 function 5: PCI configuration registers:
Common header:
0x00: 0x30581106 0x02100001 0x04010050 0x00000000
Vendor Name: VIA Technologies (0x1106)
Device Name: VT82C686A AC-97 Audio Controller (0x3058)
Command register: 0x0001
I/O space accesses: on
Memory space accesses: off
Bus mastering: off
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: multimedia (0x04)
Subclass Name: audio (0x01)
Interface: 0x00
Revision ID: 0x50
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00001001 0x00001c55 0x00001c51 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x80f6104d
0x30: 0x00000000 0x000000c0 0x00000000 0x00000305
Base address register at 0x10
type: i/o
base: 0x00001000, size: 0x00000100
Base address register at 0x14
type: i/o
base: 0x00001c54, size: 0x00000004
Base address register at 0x18
type: i/o
base: 0x00001c50, size: 0x00000004
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xc0
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x03 (pin C)
Interrupt line: 0x05
Capability register at 0xc0
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x1c00c105 0x00000040 0x02000001 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00020001 0x00000000 0x00000000 0x00000000
0xd0: 0x00020001 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
VIA Technologies VT82C686A AC-97 Audio Controller (audio multimedia, revision 0x50) at ? dev 7 function 5 (tag 0x80003d00, intrtag 0x80003d00, intrswiz 0, intrpin 0x3, i/o on, mem off, no quirks): VIA VT82C686A AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 5
auvia0: ADS72 codec; headphone, Analog Devices Phat Stereo
audio0 at auvia0: full duplex, mmap, independent
VIA Technologies VT82C686A MC-97 Modem Controller (miscellaneous communications, revision 0x30) at pci0 dev 7 function 6: PCI configuration registers:
Common header:
0x00: 0x30681106 0x02100001 0x07800030 0x00000000
Vendor Name: VIA Technologies (0x1106)
Device Name: VT82C686A MC-97 Modem Controller (0x3068)
Command register: 0x0001
I/O space accesses: on
Memory space accesses: off
Bus mastering: off
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: communications (0x07)
Subclass Name: miscellaneous (0x80)
Interface: 0x00
Revision ID: 0x30
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00001401 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x80f6104d
0x30: 0x00000000 0x000000d0 0x00000000 0x00000305
Base address register at 0x10
type: i/o
base: 0x00001400, size: 0x00000100
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xd0
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x03 (pin C)
Interrupt line: 0x05
Capability register at 0xd0
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x1c00cc05 0x00000040 0x02000001 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00020001 0x00000000 0x00000000 0x00000000
0xd0: 0x00020001 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
VIA Technologies VT82C686A MC-97 Modem Controller (miscellaneous communications, revision 0x30) at pci0 dev 7 function 6 (tag 0x80003e00, intrtag 0x80003e00, intrswiz 0, intrpin 0x3, i/o on, mem off, no quirks) not configured
cbb0 at pci0 dev 10 function 0: PCI configuration registers:
Common header:
0x00: 0xac51104c 0x02100007 0x06070000 0x00821008
Vendor Name: Texas Instruments (0x104c)
Device Name: PCI1420 PCI-CardBus Bridge (0xac51)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: CardBus (0x07)
Interface: 0x00
Revision ID: 0x00
BIST: 0x00
Header Type: 0x02+multifunction (0x82)
Latency Timer: 0x10
Cache Line Size: 0x08
Type 2 (PCI-CardBus bridge) header:
0x10: 0x07f00000 0x020000a0 0x20020200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07c00109
0x40: 0x80f6104d 0x000003e1
Base address register at 0x10 (CardBus socket/ExCA registers)
type: 32-bit nonprefetchable memory
base: 0x07f00000, size: 0x00001000
Reserved @ 0x14: 0x00a0
Secondary status register: 0x0200
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detection: off
DEVSEL timing: medium (0x1)
PCI target aborts terminate CardBus bus master transactions: off
CardBus target aborts terminate PCI bus master transactions: off
Bus initiator aborts terminate initiator transactions: off
System error: off
Parity error: off
PCI bus number: 0x00
CardBus bus number: 0x02
Subordinate bus number: 0x02
CardBus latency timer: 0x20
CardBus memory region 0:
base register: 0xfffff000
limit register: 0x00000000
CardBus memory region 1:
base register: 0xfffff000
limit register: 0x00000000
CardBus I/O region 0:
base register: 0xfffffffc
limit register: 0x00000000
CardBus I/O region 1:
base register: 0xfffffffc
limit register: 0x00000000
Interrupt line: 0x09
Interrupt pin: 0x01 (pin A)
Bridge control register: 0x07c0
Parity error response: off
CardBus SERR forwarding: off
ISA enable: off
VGA enable: off
CardBus master abort reporting: off
CardBus reset: on
Functional interrupts routed by ExCA registers: on
Memory window 0 prefetchable: on
Memory window 1 prefetchable: on
Write posting enable: on
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Base address register at 0x44 (legacy-mode registers)
type: i/o
base: 0x000003e0, size: 0x00000004
Device-dependent header:
0x48: 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x08449061 0x00000000 0x00000000 0x012c1222
0x90: 0x6166a2c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00100 0x00000002 0x0000001f
0xb0: 0x09000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Texas Instruments PCI1420 PCI-CardBus Bridge (CardBus bridge) at ? dev 10 function 0 (tag 0x80005000, intrtag 0x80005000, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00)
cbb1 at pci0 dev 10 function 1: PCI configuration registers:
Common header:
0x00: 0xac51104c 0x02100007 0x06070000 0x00821008
Vendor Name: Texas Instruments (0x104c)
Device Name: PCI1420 PCI-CardBus Bridge (0xac51)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: CardBus (0x07)
Interface: 0x00
Revision ID: 0x00
BIST: 0x00
Header Type: 0x02+multifunction (0x82)
Latency Timer: 0x10
Cache Line Size: 0x08
Type 2 (PCI-CardBus bridge) header:
0x10: 0x07f01000 0x020000a0 0x20030300 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07c0020a
0x40: 0x80f6104d 0x00000001
Base address register at 0x10 (CardBus socket/ExCA registers)
type: 32-bit nonprefetchable memory
base: 0x07f01000, size: 0x00001000
Reserved @ 0x14: 0x00a0
Secondary status register: 0x0200
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detection: off
DEVSEL timing: medium (0x1)
PCI target aborts terminate CardBus bus master transactions: off
CardBus target aborts terminate PCI bus master transactions: off
Bus initiator aborts terminate initiator transactions: off
System error: off
Parity error: off
PCI bus number: 0x00
CardBus bus number: 0x03
Subordinate bus number: 0x03
CardBus latency timer: 0x20
CardBus memory region 0:
base register: 0xfffff000
limit register: 0x00000000
CardBus memory region 1:
base register: 0xfffff000
limit register: 0x00000000
CardBus I/O region 0:
base register: 0xfffffffc
limit register: 0x00000000
CardBus I/O region 1:
base register: 0xfffffffc
limit register: 0x00000000
Interrupt line: 0x0a
Interrupt pin: 0x02 (pin B)
Bridge control register: 0x07c0
Parity error response: off
CardBus SERR forwarding: off
ISA enable: off
VGA enable: off
CardBus master abort reporting: off
CardBus reset: on
Functional interrupts routed by ExCA registers: on
Memory window 0 prefetchable: on
Memory window 1 prefetchable: on
Write posting enable: on
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Base address register at 0x44 (legacy-mode registers)
type: i/o
base: 0x00000000, size: 0x00000004
Device-dependent header:
0x48: 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x08449061 0x00000000 0x00000000 0x012c1222
0x90: 0x6166a2c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00100 0x00000002 0x0000001f
0xb0: 0x09000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Texas Instruments PCI1420 PCI-CardBus Bridge (CardBus bridge) at ? dev 10 function 1 (tag 0x80005100, intrtag 0x80005100, intrswiz 0, intrpin 0x2, i/o on, mem on, no quirks): Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00)
Texas Instruments TSB12LV26 OHCI IEEE 1394 Host Controller (Firewire serial bus, interface 0x10) at pci0 dev 14 function 0: PCI configuration registers:
Common header:
0x00: 0x8020104c 0x02100016 0x0c001000 0x00000008
Vendor Name: Texas Instruments (0x104c)
Device Name: TSB12LV26 OHCI IEEE 1394 Host Controller (0x8020)
Command register: 0x0016
I/O space accesses: off
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: on
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: serial bus (0x0c)
Subclass Name: Firewire (0x00)
Interface: 0x10
Revision ID: 0x00
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x00
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0xe8004000 0xe8000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x80f6104d
0x30: 0x00000000 0x00000044 0x00000000 0x04030109
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xe8004000, size: 0x00000800
Base address register at 0x14
type: 32-bit nonprefetchable memory
base: 0xe8000000, size: 0x00004000
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x44
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x04
Minimum Grant: 0x03
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x09
Capability register at 0x44
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00000000 0x64110001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00002400 0x00001086 0x80f6104d 0x00000000
Don't know how to pretty-print device-dependent header.
Texas Instruments TSB12LV26 OHCI IEEE 1394 Host Controller (Firewire serial bus, interface 0x10) at pci0 dev 14 function 0 (tag 0x80007000, intrtag 0x80007000, intrswiz 0, intrpin 0x1, i/o off, mem on, no quirks) not configured
rtk0 at pci0 dev 16 function 0: PCI configuration registers:
Common header:
0x00: 0x813910ec 0x02900007 0x02000010 0x00000800
Vendor Name: Realtek Semiconductor (0x10ec)
Device Name: 8139 10/100 Ethernet (0x8139)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0290
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: network (0x02)
Subclass Name: ethernet (0x00)
Interface: 0x00
Revision ID: 0x10
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x08
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00001801 0xe8004800 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x80f6104d
0x30: 0x00000000 0x00000050 0x00000000 0x4020010a
Base address register at 0x10
type: i/o
base: 0x00001800, size: 0x00000100
Base address register at 0x14
type: 32-bit nonprefetchable memory
base: 0xe8004800, size: 0x00000100
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x104d
Subsystem ID: 0x80f6
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x50
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x40
Minimum Grant: 0x20
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x0a
Capability register at 0x50
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0xf7c20001 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Realtek Semiconductor 8139 10/100 Ethernet (ethernet network, revision 0x10) at ? dev 16 function 0 (tag 0x80008000, intrtag 0x80008000, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 10
rtk0: Ethernet address 08:00:46:2f:b2:57
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
viaenv0 at viapm0
cbb0: bad Vcc request. sock_ctrl 0xdffefa80, sock_status 0xfffbef3f
cbb0: interrupting at irq 9
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x821008 lscp 0x20020200
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cbb1: bad Vcc request. sock_ctrl 0x76db9680, sock_status 0xbaee77f3
cbb1: interrupting at irq 10
cbb1: cacheline 0x8 lattimer 0x20
cbb1: bhlc 0x821008 lscp 0x20030300
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
apm0 at mainbus0: Power Management spec V1.2
biomask ef4d netmask ef4d ttymask ffcf
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Accounting started
---------60be22eb57a34f060be22eb57a34f0--