Subject: RE: kern/13244: ThunderLAN (tl) fails on DeskPro 4000M 5233MMX
To: 'Manuel Bouyer' <bouyer@antioche.eu.org>
From: Mine Sakiyama <msakiyam@nortelnetworks.com>
List: port-i386
Date: 02/12/2002 11:35:17
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C1B3FC.6674DDB0
Content-Type: text/plain;
charset="iso-8859-1"
I have tried ifconfig with instance 0, but it always comes up as below.
> tl0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu
1500
> address: 00:08:c7:40:82:5b
> media: Ethernet 10baseT instance 1 (10baseT)
> status: no carrier
> inet 10.0.0.1 netmask 0xff000000 broadcast 10.255.255.255
> inet6 fe80::208:c7ff:fe40:825b%tl0 prefixlen 64 scopeid 0x2
Mine
-----Original Message-----
From: Manuel Bouyer [mailto:bouyer@antioche.eu.org]
Sent: Tuesday, February 12, 2002 11:15 AM
To: Sakiyama, Mine [SC8:5932:EXCH]
Cc: 'port-i386@netbsd.org'
Subject: Re: kern/13244: ThunderLAN (tl) fails on DeskPro 4000M 5233MMX
On Tue, Feb 12, 2002 at 11:08:40AM -0800, Mine Sakiyama wrote:
> Thanks for the reply, I have done ifconfig tl0 media 10BaseT instance 1,
and
> still it has no connection. Below is the dmesg and ifconfig results for
more
> details. tl0 is connected to 10BaseT switch and tl0 has to be running at
> 10BaseT, so I am though of stuck here.
> Thanks
> # ifconfig tl0 media 10BaseT instance 1
> # ifconfig tl0
> tl0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu
1500
> address: 00:08:c7:40:82:5b
> media: Ethernet 10baseT instance 1 (10baseT)
> status: no carrier
> inet 10.0.0.1 netmask 0xff000000 broadcast 10.255.255.255
> inet6 fe80::208:c7ff:fe40:825b%tl0 prefixlen 64 scopeid 0x2
> # dmesg
> NetBSD 1.5.2 (GENERIC) #3: Sat Aug 18 23:37:05 CEST 2001
> he@hamster.urc.uninett.no:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium II (Klamath) (686-class), 266.46 MHz
> total memory = 65152 KB
> avail memory = 55108 KB
> using 840 buffers containing 3360 KB of memory
> BIOS32 rev. 0 found at 0xed000
> mainbus0 (root)
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled
> pchb0 at pci0 dev 0 function 0
> pchb0: Intel 82443LX PCI AGP Controller (PAC) (rev. 0x03)
> ppb0 at pci0 dev 1 function 0: Intel 82443LX AGP Interface (PAC) (rev.
0x03)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> vga1 at pci1 dev 0 function 0: Matrox MGA Millennium II 2164WA-B AG (rev.
> 0x00)
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> ex0 at pci0 dev 13 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
> ex0: interrupting at irq 11
> ex0: MAC address 00:60:08:a5:fb:e7
> nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1
> nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ahc1 at pci0 dev 15 function 0
> ahc1: interrupting at irq 11
> ahc1: Using left over BIOS settings
> ahc1: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs
> scsibus0 at ahc1 channel 0: 8 targets, 8 luns per target
> tl0 at pci0 dev 16 function 0
> tl0: Compaq Deskpro 4000 5233MMX
> tl0: Ethernet address 00:08:c7:40:82:5b
> tl0: interrupting at irq 11
> lxtphy0 at tl0 phy 1: LXT970 10/100 media interface, rev. 0
> lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> tlphy0 at tl0 phy 31: ThunderLAN 10baseT media interface, rev. 6
> tlphy0: 10base5, 10baseT, 10baseT-FDX, auto
ha yes, the lxtphy is first, so it should be 'instance 0' to access it,
not 'instance 1'. Try
ifconfig tl0 media 10BaseT instance 0
--
Manuel Bouyer <bouyer@antioche.eu.org>
--
------_=_NextPart_001_01C1B3FC.6674DDB0
Content-Type: text/html;
charset="iso-8859-1"
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2654.89">
<TITLE>RE: kern/13244: ThunderLAN (tl) fails on DeskPro 4000M 5233MMX</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=2>I have tried ifconfig with instance 0, but it always comes up as below.</FONT>
</P>
<P><FONT SIZE=2>> tl0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500</FONT>
<BR><FONT SIZE=2>> address: 00:08:c7:40:82:5b</FONT>
<BR><FONT SIZE=2>> media: Ethernet 10baseT instance 1 (10baseT)</FONT>
<BR><FONT SIZE=2>> status: no carrier</FONT>
<BR><FONT SIZE=2>> inet 10.0.0.1 netmask 0xff000000 broadcast 10.255.255.255</FONT>
<BR><FONT SIZE=2>> inet6 fe80::208:c7ff:fe40:825b%tl0 prefixlen 64 scopeid 0x2</FONT>
</P>
<BR>
<P><FONT SIZE=2>Mine</FONT>
</P>
<P><FONT SIZE=2>-----Original Message-----</FONT>
<BR><FONT SIZE=2>From: Manuel Bouyer [<A HREF="mailto:bouyer@antioche.eu.org">mailto:bouyer@antioche.eu.org</A>]</FONT>
<BR><FONT SIZE=2>Sent: Tuesday, February 12, 2002 11:15 AM</FONT>
<BR><FONT SIZE=2>To: Sakiyama, Mine [SC8:5932:EXCH]</FONT>
<BR><FONT SIZE=2>Cc: 'port-i386@netbsd.org'</FONT>
<BR><FONT SIZE=2>Subject: Re: kern/13244: ThunderLAN (tl) fails on DeskPro 4000M 5233MMX</FONT>
</P>
<BR>
<P><FONT SIZE=2>On Tue, Feb 12, 2002 at 11:08:40AM -0800, Mine Sakiyama wrote:</FONT>
<BR><FONT SIZE=2>> Thanks for the reply, I have done ifconfig tl0 media 10BaseT instance 1, and</FONT>
<BR><FONT SIZE=2>> still it has no connection. Below is the dmesg and ifconfig results for more</FONT>
<BR><FONT SIZE=2>> details. tl0 is connected to 10BaseT switch and tl0 has to be running at</FONT>
<BR><FONT SIZE=2>> 10BaseT, so I am though of stuck here. </FONT>
<BR><FONT SIZE=2>> Thanks</FONT>
<BR><FONT SIZE=2>> # ifconfig tl0 media 10BaseT instance 1</FONT>
<BR><FONT SIZE=2>> # ifconfig tl0</FONT>
<BR><FONT SIZE=2>> tl0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500</FONT>
<BR><FONT SIZE=2>> address: 00:08:c7:40:82:5b</FONT>
<BR><FONT SIZE=2>> media: Ethernet 10baseT instance 1 (10baseT)</FONT>
<BR><FONT SIZE=2>> status: no carrier</FONT>
<BR><FONT SIZE=2>> inet 10.0.0.1 netmask 0xff000000 broadcast 10.255.255.255</FONT>
<BR><FONT SIZE=2>> inet6 fe80::208:c7ff:fe40:825b%tl0 prefixlen 64 scopeid 0x2</FONT>
<BR><FONT SIZE=2>> # dmesg</FONT>
<BR><FONT SIZE=2>> NetBSD 1.5.2 (GENERIC) #3: Sat Aug 18 23:37:05 CEST 2001</FONT>
<BR><FONT SIZE=2>> he@hamster.urc.uninett.no:/usr/src/sys/arch/i386/compile/GENERIC</FONT>
<BR><FONT SIZE=2>> cpu0: Intel Pentium II (Klamath) (686-class), 266.46 MHz</FONT>
<BR><FONT SIZE=2>> total memory = 65152 KB</FONT>
<BR><FONT SIZE=2>> avail memory = 55108 KB</FONT>
<BR><FONT SIZE=2>> using 840 buffers containing 3360 KB of memory</FONT>
<BR><FONT SIZE=2>> BIOS32 rev. 0 found at 0xed000</FONT>
<BR><FONT SIZE=2>> mainbus0 (root)</FONT>
<BR><FONT SIZE=2>> pci0 at mainbus0 bus 0: configuration mode 1</FONT>
<BR><FONT SIZE=2>> pci0: i/o space, memory space enabled</FONT>
<BR><FONT SIZE=2>> pchb0 at pci0 dev 0 function 0</FONT>
<BR><FONT SIZE=2>> pchb0: Intel 82443LX PCI AGP Controller (PAC) (rev. 0x03)</FONT>
<BR><FONT SIZE=2>> ppb0 at pci0 dev 1 function 0: Intel 82443LX AGP Interface (PAC) (rev. 0x03)</FONT>
<BR><FONT SIZE=2>> pci1 at ppb0 bus 1</FONT>
<BR><FONT SIZE=2>> pci1: i/o space, memory space enabled</FONT>
<BR><FONT SIZE=2>> vga1 at pci1 dev 0 function 0: Matrox MGA Millennium II 2164WA-B AG (rev.</FONT>
<BR><FONT SIZE=2>> 0x00)</FONT>
<BR><FONT SIZE=2>> wsdisplay0 at vga1: console (80x25, vt100 emulation)</FONT>
<BR><FONT SIZE=2>> ex0 at pci0 dev 13 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)</FONT>
<BR><FONT SIZE=2>> ex0: interrupting at irq 11</FONT>
<BR><FONT SIZE=2>> ex0: MAC address 00:60:08:a5:fb:e7</FONT>
<BR><FONT SIZE=2>> nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1</FONT>
<BR><FONT SIZE=2>> nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto</FONT>
<BR><FONT SIZE=2>> ahc1 at pci0 dev 15 function 0</FONT>
<BR><FONT SIZE=2>> ahc1: interrupting at irq 11</FONT>
<BR><FONT SIZE=2>> ahc1: Using left over BIOS settings</FONT>
<BR><FONT SIZE=2>> ahc1: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs</FONT>
<BR><FONT SIZE=2>> scsibus0 at ahc1 channel 0: 8 targets, 8 luns per target</FONT>
<BR><FONT SIZE=2>> tl0 at pci0 dev 16 function 0</FONT>
<BR><FONT SIZE=2>> tl0: Compaq Deskpro 4000 5233MMX</FONT>
<BR><FONT SIZE=2>> tl0: Ethernet address 00:08:c7:40:82:5b</FONT>
<BR><FONT SIZE=2>> tl0: interrupting at irq 11</FONT>
<BR><FONT SIZE=2>> lxtphy0 at tl0 phy 1: LXT970 10/100 media interface, rev. 0</FONT>
<BR><FONT SIZE=2>> lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto</FONT>
<BR><FONT SIZE=2>> tlphy0 at tl0 phy 31: ThunderLAN 10baseT media interface, rev. 6</FONT>
<BR><FONT SIZE=2>> tlphy0: 10base5, 10baseT, 10baseT-FDX, auto</FONT>
</P>
<P><FONT SIZE=2>ha yes, the lxtphy is first, so it should be 'instance 0' to access it,</FONT>
<BR><FONT SIZE=2>not 'instance 1'. Try</FONT>
<BR><FONT SIZE=2>ifconfig tl0 media 10BaseT instance 0</FONT>
</P>
<P><FONT SIZE=2>-- </FONT>
<BR><FONT SIZE=2>Manuel Bouyer <bouyer@antioche.eu.org></FONT>
<BR><FONT SIZE=2>--</FONT>
</P>
</BODY>
</HTML>
------_=_NextPart_001_01C1B3FC.6674DDB0--