Hi,

       From: seebs@plethora.net (Peter Seebach)
    Subject: Re: "IRQ not configured"
      Date : Sun, 30 Dec 2001 19:47:23 -0600
 Message-ID: <200112310147.fBV1lOP03488@guild.plethora.net>

$ Well, here's what it does with the patch you provided.  If I insert a card,
$ the machine doesn't print anything.  ^T on console still works, but everything
$ else is hung, and stays hung even if I take the card back out.  There's a
$ couple of warnings about overriding existing IRQ's, and I know that the box
$ seems to put the USB and CardBus on IRQ 11 under Windows...


$ NetBSD 1.5ZA (ANNE) #3: Mon Dec 31 07:19:07 MST 2001

<..snip..>

$ BIOS32 rev. 0 found at 0xfd720
$ PCI BIOS rev. 2.1 found at 0xfd83e
$ pcibios: config mechanism [1][x], special cycles [x][x], last bus 1
$ PCI IRQ Routing Table rev. 1.0 found at 0xfdf70, size 112 bytes (5 entries)
$ PCI Interrupt Router at 000:07:0 (VIA Technologies VT82C596A (Apollo Pro) PCI-ISA Bridge)
$ ------------------------------------------
$   device vendor product pin PIRQ IRQ stage
$ ------------------------------------------
$ 000:07:2 0x1106 0x3038   D  0x03   9  0    WARNING: overriding irq 11
$ 000:07:5 0x1106 0x3058   C  0x02  11  0    WARNING: overriding irq 9
$ 000:09:0 0x8086 0x1229   A  0x01  11  0    already assigned
$ 000:09:1 0x11c1 0x045c   A  0x01  11  0    already assigned
$ 000:10:0 0x104c 0xac50   A  0x03   9  0    fixed up
$ ------------------------------------------

How about next options?

    options PCIBIOS_IRQS_HINT=0x0800 # IRQ 11

Regards!
---
 Masanori Kanaoka	kanaoka@ann.hi-ho.ne.jp