This is a multi-part message in MIME format.
--------------649076FA83F17349C8787AAA
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hi ,
I have recently upgraded to 1.5.2 and then to current on a (IBM 600E)
laptop, that had been running 1.4.2 and 1.5alpha, for at least 2 years.
I am now getting pciide0 lost interrupt messages? On an alpha box
recently after install i got a similar message -what's up with pciide
code??? dmesg included below:
-Mel

--------------649076FA83F17349C8787AAA
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.1"

NetBSD 1.5Y (SINGLE) #4: Wed Oct 31 08:04:33 EST 2001
    mel@casey183:/usr/src/sys/arch/i386/compile/SINGLE
cpu0: Intel Celeron (Mendocino) (686-class), 363.98 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 256 KB 32b/line 4-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR>
total memory = 127 MB
avail memory = 112 MB
using 1656 buffers containing 6624 KB of memory
BIOS32 rev. 0 found at 0xfd820
PCI BIOS rev. 2.1 found at 0xfd880
pcibios: config mechanism [1][x], special cycles [1][x], last bus 7
PCI IRQ Routing Table rev. 1.0 found at 0xf9e40, size 112 bytes (5 entries)
PCI Interrupt Router at 000:07:0
PCI Exclusive IRQs: 11
------------------------------------------
  device vendor product pin PIRQ IRQ stage
------------------------------------------
000:02:0 0x104c 0xac1d   A  0x00  11  0    already assigned
000:02:1 0x104c 0xac1d   B  0x01  11  0    already assigned
000:06:0 0x1013 0x6001   A  0x00  11  0    already assigned
000:07:2 0x8086 0x7112   D  0x03  11  0    already assigned
001:00:0 0x10c8 0x0005   A  0x00  11  0    already assigned
------------------------------------------
PCI fixup examining 8086:7190
PCI fixup examining 8086:7191
PCI fixup examining 10c8:05
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 104c:ac1d
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI fixup examining 104c:ac1d
PCI bridge 2: primary 0, secondary 3, subordinate 3
PCI fixup examining 1013:6001
PCI fixup examining 8086:7110
PCI fixup examining 8086:7111
PCI fixup examining 8086:7112
PCI fixup examining 8086:7113
PCI bus #3 is the last bus
[System BIOS Setting]-----------------------
  device vendor product
  register space address    size
--------------------------------------------
000:00:0 0x8086 0x7190 
	10h mem  0x40000000 0x04000000
		[OK]
000:01:0 0x8086 0x7191 
		[OK]
000:02:0 0x104c 0xac1d 
	10h mem  0x50102000 0x00001000
		[OK]
000:02:1 0x104c 0xac1d 
	10h mem  0x50101000 0x00001000
		[OK]
000:06:0 0x1013 0x6001 
	10h mem  0x50100000 0x00001000
	14h mem  0x50000000 0x00100000
		[OK]
000:07:0 0x8086 0x7110 
		[OK]
000:07:1 0x8086 0x7111 
	20h port 0x0000fcf0 0x00000010
		[OK]
000:07:2 0x8086 0x7112 
	20h port 0x00008400 0x00000020
		[OK]
000:07:3 0x8086 0x7113 
		[OK]
001:00:0 0x10c8 0x0005 
	10h mem  0xe0000000 0x01000000
	14h mem  0x70000000 0x00400000
	18h mem  0x70400000 0x00100000
		[OK]
--------------------------[  0 devices bogus]
 Physical memory end: 0x07fce000
 PCI memory mapped I/O space start: 0x08000000
mainbus0 (root)
pnpbios0 at mainbus0: nodes 23, max len 980
pnpbios0: not docked
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x20)
wsdisplay0 at vga1 kbdmux -1: console (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0: Texas Instruments PCI1251 PCI-CardBus Bridge (rev. 0x00)
cbb1 at pci0 dev 2 function 1: Texas Instruments PCI1251 PCI-CardBus Bridge (rev. 0x00)
Cirrus Logic CS4610 SoundFusion Audio Accelerator (audio multimedia, revision 0x01) at pci0 dev 6 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DBCA-206480>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6194 MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CRN-8241B, 1999/09/04, 1.22> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt2 at isa0 port 0x3bc-0x3bf: polled
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.02
audio0 at sb0: half duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi at opl0 not configured
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask efcd netmask efcd ttymask ffcf
IPsec: Initialized Security Association Processing.
wi0 at pcmcia1 function 0: SMC, SMC2632W, Version 01.02
wi0: 802.11 address 00:04:e2:07:d0:f5
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A, Firmware: 0.7 variant 6
ugen0 at uhub0 port 1
ugen0: Eastman Kodak Company KODAK DC280 Zoom Digital Camera, rev 1.00/1.01, addr 2
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ugen0: at uhub0 port 1 (addr 2) disconnected
ugen0 detached
ugen0 at uhub0 port 1
ugen0: Eastman Kodak Company KODAK DC280 Zoom Digital Camera, rev 1.00/1.01, addr 2
ugen0: at uhub0 port 1 (addr 2) disconnected
ugen0 detached
ugen0 at uhub0 port 1
ugen0: Eastman Kodak Company KODAK DC280 Zoom Digital Camera, rev 1.00/1.01, addr 2
ugen0: at uhub0 port 1 (addr 2) disconnected
ugen0 detached
ugen0 at uhub0 port 1
ugen0: Eastman Kodak Company KODAK DC290 Zoom Digital Camera, rev 1.00/1.00, addr 2
ugen0: at uhub0 port 1 (addr 2) disconnected
ugen0 detached
pciide0:0:0: lost interrupt
	type: ata tc_bcount: 8192 tc_skip: 0
pciide0:0:0: intr with DRQ (st=0x58)
wd0e: device timeout writing fsbn 6895360 of 6895360-6895375 (wd0 bn 8514145; cn 9009 tn 10 sn 10), retrying
wd0: soft error (corrected)
ugen0 at uhub0 port 1
ugen0: Eastman Kodak Company KODAK DC290 Zoom Digital Camera, rev 1.00/1.00, addr 2
ugen0: at uhub0 port 1 (addr 2) disconnected
ugen0 detached
pciide0:0:0: lost interrupt
	type: ata tc_bcount: 8192 tc_skip: 0
pciide0:0:0: intr with DRQ (st=0x58)
wd0a: device timeout writing fsbn 75984 of 75984-75999 (wd0 bn 76047; cn 80 tn 7 sn 6), retrying
wd0: soft error (corrected)
ugen0 at uhub0 port 1
ugen0: Eastman Kodak Company KODAK DC280 Zoom Digital Camera, rev 1.00/1.01, addr 2
ugen0: at uhub0 port 1 (addr 2) disconnected
ugen0 detached

--------------649076FA83F17349C8787AAA--