Hi, 

I have patched (succesufuly!!) my 1.5.2 kernel with altq-3.0 patch. Everything
goes well, lo0 (sample) configuration file /etc/altq.conf working - no problem,
but when I put sample file of rtk0 device it just writes this ones lines:

bash-2.05# altqd
altqd[26999]: ALTQ config file is /etc/altq.conf
altqd[26999]: tbr is already installed on rtk0,
  using the current setting (rate:100.00M  size:11.72K).
altqd[26999]: syscall error: can't add cbq on interface 'rtk0'
altqd[26999]: : Device not configured
altqd[26999]: Error in /etc/altq.conf, line 1
altqd[26999]: Config failed. Exiting.

and here is my config(/etc/altq.conf):

interface rtk0 bandwidth 100M cbq
class cbq rtk0 root_class NULL pbandwidth 100
class cbq rtk0 def_class root_class borrow pbandwidth 95 default 
# tcp, udp, mcast
class cbq rtk0 tcp_class def_class borrow pbandwidth  40
	filter rtk0 tcp_class 0 0 0 0 6
class cbq rtk0 udp_class def_class borrow pbandwidth 40
	filter rtk0 udp_class 0 0 0 0 17
class cbq rtk0 mcast_class def_class pbandwidth 10
	filter rtk0 mcast_class 224.0.0.0 netmask 0xf0000000 0 0 0 17
# http ftp
class cbq rtk0 http_class tcp_class borrow pbandwidth  10
	filter rtk0 http_class 0 0 0 80 6
class cbq rtk0 ftp_class tcp_class borrow pbandwidth  10
	filter rtk0 ftp_class 0 0 0 20 6
	filter rtk0 ftp_class 0 20 0 0 6

where I something mistyped or maybe there ir other things that I should know ?


Symka.