Hi.  Just installed NetBSD on a Celeron 850/100 machine, with an MSI 815ME
super-integrated board.

Everything's supported!  Audio, Ethernet, Hardware Monitor...
It's a nice, compact, MicroATX, zero-cards server. :)

Thanks, NetBSD.  You guys rock.

Here's the dmesg output:

NetBSD 1.5.2 (MISO) #0: Fri Oct  5 11:46:53 EDT 2001
    root@miso:/usr/src/sys/arch/i386/compile/MISO
cpu0: Intel Pentium III (Coppermine) Celeron (686-class), 847.26 MHz
total memory = 254 MB
avail memory = 232 MB
using 3284 buffers containing 13136 KB of memory
BIOS32 rev. 0 found at 0xfb120
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x1130 (rev. 0x02)
vga1 at pci0 dev 2 function 0: Intel product 0x1132 (rev. 0x02)
wsdisplay0 at vga1
ppb0 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fxp0 at pci1 dev 8 function 0: Intel i82562 Ethernet, rev 1
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:10:dc:08:69:07, 10/100 Mb/s
ukphy0 at fxp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00aa00, model 0x0032, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x02)
pciide0 at pci0 dev 31 function 1: Intel 82801BA IDE Controller (ICH2) (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLP AS20.5>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 19595 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 40132503 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
Intel 82801BA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
lm0 at isa0 port 0x290-0x297: W83627HF
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask f7e7 netmask ffe7 ttymask ffe7

-- 
Dan J. Fraser <dfraser@capybara.org>
PGP: 0xF3972A01 (17 B7 24 90 27 05 B8 92  4F 7F 61 18 B9 D1 17 CE)
"A human never stands so tall as when stooping to help a small computer."