he@nsa.uninett.no:/usr/src/sys/arch/i386/compile/INSTALL_LAPTOP
cpu0: Cyrix MMX-enhanced MediaGX (GXm) (586-class), 267.29 MHz
total memory =3D 32384 KB
avail memory =3D 25900 KB
using 430 buffers containing 1720 KB of memory
BIOS32 rev. 0 found at 0xfae10
PCI BIOS rev. 2.1 found at 0xfae40
PCI IRQ Routing Table rev. 1.0 found at 0xfdc80, size 64 bytes (2 entries)
PCI Interrupt Router at 000:18:0 (vendor 0x1078 product 0x0002)
PCI Exclusive IRQs: 5 9 10
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x1078 product
0x0100
Warning: unable to fix up PCI interrupt routing
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1078 product 0x0001 (rev. 0x00)
cbb0 at pci0 dev 11 function 0: vendor 0x104c product 0xac15 (rev. 0x01)
cbb1 at pci0 dev 11 function 1: vendor 0x104c product 0xac15 (rev. 0x01)
pcib0 at pci0 dev 18 function 0
pcib0: vendor 0x1078 product 0x0100 (rev. 0x00)
vendor 0x1078 product 0x0101 (miscellaneous bridge) at pci0 dev 18 function=
 1 not configured
pciide0 at pci0 dev 18 function 2: vendor 0x1078 product 0x0102 (rev. 0x00)
pciide0: hardware does not support DMA
pciide0: primary channel wired to compatibility mode
pciide0: primary channel ignored (other hardware responding at addresses)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (not responding; disabled or no
drives?)
vendor 0x1078 product 0x0103 (audio multimedia) at pci0 dev 18 function 3
not configured
vendor 0x10c8 product 0x0083 (VGA display, revision 0x01) at pci0 dev 21
function 0 not configured
cbb0: interrupting at irq 10
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x824008 lscp 0x20010100
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cbb1: interrupting at irq 10
cbb1: cacheline 0x8 lattimer 0x20
cbb1: bhlc 0x824008 lscp 0x20020200
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1017GAP>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 9590 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19640880 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
isapnp0: no ISA Plug 'n Play devices found
biomask ffe5 netmask ffe5 ttymask ffe7
md0: internal 2048K image area

-------> HERE <---------
ep0 at pcmcia0 function 0: can't allocate i/o space
------------------------

com3 at pcmcia0 function 1: serial device
com3: ns16550a, working fifo
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs

The same problem appear in OpenBSD 2.9...

--
Maciej Zawadzi=F1ski (Mauser)
Email: mauser@poczta.fm
WWW: www.mauser.prv.pl



----------------------------------------------------
# Nadchodza blokersi. Jestes z nimi czy przeciwko? #
>            http://blokersi.interia.pl/           <