Hi,


We are seeing a problem with our new machine. Seems to blow up randomly on
builds. I recall a problem with Via Chipsets. Is there a patch?
Thanks,

Jeff Northon

webtest# dmesg
NetBSD 1.5.1 (WEBTEST) #0: Wed Sep 12 08:55:59 PDT 2001
    lburns@solstice.sasquatch.com:/usr/src/sys/arch/i386/compile/WEBTEST
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 1208.84 MHz
total memory = 1535 MB
avail memory = 1417 MB
using 11424 buffers containing 78720 KB of memory
BIOS32 rev. 0 found at 0xf0f50
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0305 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0x8305 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x524c (rev. 0x00)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev.
0x40)
pciide0 at pci0 dev 4 function 1: VIA Technologies VT82C686A (Apollo
KX133) ATA100 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
pciide0: disabling primary channel (no drives)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 4 function 3: VIA Technologies VT83C572 USB Controller
(rev. 0x16)
uhci0: interrupting at irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 4 function 4
pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x40)
ahc1 at pci0 dev 11 function 0
OptionMode = 3
ahc1: interrupting at irq 10
ahc1: aic7892 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1 channel 0: 16 targets, 8 luns per target
fxp0 at pci0 dev 12 function 0: Intel i82557 Ethernet, rev 12
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:02:b3:36:b0:97, 10/100 Mb/s
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pciide1 at pci0 dev 17 function 0: Promise Ultra100/ATA Bus Master IDE
Accelerator (rev. 0x02)
pciide1: bus-master DMA support present
pciide1: primary channel configured to native-PCI mode
pciide1: using irq 10 for native-PCI interrupt
pciide1: disabling primary channel (no drives)
pciide1: secondary channel configured to native-PCI mode
pciide1: disabling secondary channel (no drives)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
biomask f765 netmask ff65 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 40.0MHz, offset = 0x3f
ahc1: target 0 using tagged queuing
sd0 at scsibus0 target 0 lun 0: <IBM, DDYS-T18350N, S96H> SCSI3 0/direct
fixed
sd0: 17501 MB, 15110 cyl, 6 head, 395 sec, 512 bytes/sect x 35843670
sectors
ahc1: target 2 using 16bit transfers
ahc1: target 2 synchronous at 40.0MHz, offset = 0x3f
ahc1: target 2 using tagged queuing
sd1 at scsibus0 target 2 lun 0: <IBM, DDYS-T18350N, S96H> SCSI3 0/direct
fixed
sd1: 17501 MB, 15110 cyl, 6 head, 395 sec, 512 bytes/sect x 35843670
sectors
ahc1: target 4 using 16bit transfers
ahc1: target 4 synchronous at 40.0MHz, offset = 0x3f
ahc1: target 4 using tagged queuing
sd2 at scsibus0 target 4 lun 0: <IBM, DDYS-T18350N, S96H> SCSI3 0/direct
fixed
sd2: 17501 MB, 15110 cyl, 6 head, 395 sec, 512 bytes/sect x 35843670
sectors
IPsec: Initialized Security Association Processing.
sd2: no disk label
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
sd2: no disk label
webtest#