I'm trying to install a Lucent Wavelan PCI adapter in an AMD Athlon
desktop machine with a FIC SD11 motherboard and AMIBIOS version NC610
running NetBSD-current, with no success.  I get the following messages
at boot time:

  cbb0 at pci0 dev 3 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x01)
  cbb0: NOT USED because of unconfigured interrupt

I have tried enabling all the PCIBIOS related kernel options, but they
make no difference.  The PCIBIOSVERBOSE output is enclosed below.  Any
suggestions?
-- 
Andreas Gustafsson, gson@isc.org

BIOS32 rev. 0 found at 0xfdae0
PCI BIOS rev. 2.1 found at 0xfdb01
pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
PCI IRQ Routing Table rev. 1.0 found at 0xf82c0, size 144 bytes (7 entries)
PCI Interrupt Router at 000:07:0 (VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge)
PIR Entry 0:
	Bus: 1  Device: 5
		INTA: link 0x02 bitmap 0xdeb8
		INTB: link 0x03 bitmap 0xdeb8
		INTC: link 0x00 bitmap 0x0000
		INTD: link 0x00 bitmap 0x0000
PIR Entry 1:
	Bus: 0  Device: 7
		INTA: link 0xfe bitmap 0x4000
		INTB: link 0xff bitmap 0x8000
		INTC: link 0x03 bitmap 0xdeb8
		INTD: link 0x05 bitmap 0xdeb8
PIR Entry 2:
	Bus: 0  Device: 3
		INTA: link 0x05 bitmap 0xdeb8
		INTB: link 0x01 bitmap 0xdeb8
		INTC: link 0x02 bitmap 0xdeb8
		INTD: link 0x03 bitmap 0xdeb8
PIR Entry 3:
	Bus: 0  Device: 4
		INTA: link 0x01 bitmap 0xdeb8
		INTB: link 0x02 bitmap 0xdeb8
		INTC: link 0x03 bitmap 0xdeb8
		INTD: link 0x05 bitmap 0xdeb8
PIR Entry 4:
	Bus: 0  Device: 9
		INTA: link 0x02 bitmap 0xdeb8
		INTB: link 0x03 bitmap 0xdeb8
		INTC: link 0x05 bitmap 0xdeb8
		INTD: link 0x01 bitmap 0xdeb8
PIR Entry 5:
	Bus: 0  Device: 6
		INTA: link 0x03 bitmap 0xdeb8
		INTB: link 0x05 bitmap 0xdeb8
		INTC: link 0x01 bitmap 0xdeb8
		INTD: link 0x02 bitmap 0xdeb8
PIR Entry 6:
	Bus: 0  Device: 15
		INTA: link 0x05 bitmap 0xdeb8
		INTB: link 0x01 bitmap 0xdeb8
		INTC: link 0x02 bitmap 0xdeb8
		INTD: link 0x03 bitmap 0xdeb8
pciintr_link_alloc: bus 0 device 7: link 0xfe invalid
pciintr_link_alloc: bus 0 device 7: link 0xff invalid
pciintr_link_alloc: bus 0 device 7: link 0x05 invalid
pciintr_link_alloc: bus 0 device 3: link 0x05 invalid
pciintr_link_alloc: bus 0 device 4: link 0x05 invalid
pciintr_link_alloc: bus 0 device 9: link 0x05 invalid
pciintr_link_alloc: bus 0 device 6: link 0x05 invalid
pciintr_link_alloc: bus 0 device 15: link 0x05 invalid
pciintr_link_fixup: PIRQ 0x00 already connected to IRQ 11
pciintr_link_fixup: PIRQ 0x01 already connected to IRQ 11
pciintr_link_fixup: PIRQ 0x02 already connected to IRQ 11
pciintr_link_route: route of PIRQ 0x00 -> IRQ 11 preserved BIOS setting
pciintr_link_route: route of PIRQ 0x01 -> IRQ 11 preserved BIOS setting
pciintr_link_route: route of PIRQ 0x02 -> IRQ 11 preserved BIOS setting
------------------------------------------
  device vendor product pin PIRQ IRQ stage
------------------------------------------
pciintr_header_fixup: no entry for link 0x05 (0:3:0:A)
000:04:0 0x1274 0x5000   A  0x00  11  0    already assigned
000:06:0 0x1000 0x0001   A  0x02  11  0    already assigned
pciintr_header_fixup: no entry for link 0x05 (0:7:2:D)
001:05:0 0x102b 0x0521   A  0x01  11  0    already assigned
------------------------------------------
PCI fixup examining 1022:7006
PCI fixup examining 1022:7007
PCI fixup examining 102b:521
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 104c:ac50
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI fixup examining 1274:5000
PCI fixup examining 1000:01
PCI fixup examining 1106:686
PCI fixup examining 1106:571
PCI fixup examining 1106:3038
PCI fixup examining 1106:3057
PCI fixup examining 1011:24
PCI fixup examining 1011:09
PCI fixup examining 1011:09
PCI fixup examining 1011:09
PCI fixup examining 1011:09
PCI bridge 2: primary 0, secondary 3, subordinate 3
PCI bus #3 is the last bus
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Advanced Micro Devices AMD751 System Controller (rev. 0x23)
ppb0 at pci0 dev 1 function 0: Advanced Micro Devices AMD751 PCI-to-PCI Bridge (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: Matrox MGA G200 AGP (rev. 0x01)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
cbb0 at pci0 dev 3 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x01)
cbb0: NOT USED because of unconfigured interrupt