----Next_Part(Fri_Aug_24_01:37:48_2001_234)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> I tried this iosiz setting and iosize 0x20000, but I have same problem.
> And ThinkPad 380D with Token Ring Card has same problem.
> The 535E and 380D have same pcic controller(Cirrus Logic PD6729),
> so I think these two note have sram allocation error.

I tried ThinkPad 600 with Token Ring Card. It works!
I think pcic is different between 535E and 600.
The 535E has Cirrus Logic PD6729, but the 600 has PCI1250 CardBus controller.
The 600's dmesg is attached.

uum, I want to use the 535E with Token Ring...

Thanks
Wada Keiji
----Next_Part(Fri_Aug_24_01:37:48_2001_234)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Description: dmesg ThinkPad 600
Content-Disposition: inline; filename="dmesg.600"

NetBSD 1.5X (CABBAGE) #0: Fri Aug 24 06:15:29 JST 2001
    root@cabbage:/home/ftp/pub/NetBSD/NetBSD-current/src/sys/arch/i386/compile/CABBAGE
cpu0: Intel Pentium/MMX (Tillamook) (586-class), 232.12 MHz
cpu0: features 8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8001bf<MMX>
total memory = 159 MB
avail memory = 141 MB
using 2066 buffers containing 8264 KB of memory
BIOS32 rev. 0 found at 0xfd820
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439TX System Controller (MTXC) (rev. 0x01)
pcib0 at pci0 dev 1 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x01)
pciide0 at pci0 dev 1 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DARA-212000>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 11513 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 23579136 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-ROM SR-8171, , 074B> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 1 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x01) at pci0 dev 1 function 3 not configured
Texas Instruments PCI1250 PCI-CardBus Bridge (CardBus bridge, revision 0x02) at pci0 dev 2 function 0 not configured
Texas Instruments PCI1250 PCI-CardBus Bridge (CardBus bridge, revision 0x02) at pci0 dev 2 function 1 not configured
vga1 at pci0 dev 3 function 0: Neomagic MagicGraph 128XD (rev. 0x01)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsiprobe: intellimode -> 6
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lptprobe: mask ff data 55 failed
lptprobe: mask ff data 55 failed
lpt2 at isa0 port 0x3bc-0x3bf: polled
seaprobe: board type unknown at address 0xc8000
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.02
audio0 at sb0: half duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
biomask efdd netmask efdd ttymask ffdf
pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..4..7..9..10
pcic0: using irq 3 for socket events
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying coda...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
tr2 at pcmcia0 function 0 port 0xa20-0xa27: IBM Token Ring 4/16
tr2: address 00:04:ac:56:a1:c9 ring speed 16 Mbps
pcmcia1: CIS checksum failed
ne2 at pcmcia1 function 0 port 0x400-0x40f port 0x410-0x41f
ne2: IBM InfoMover Ethernet
ne2: Ethernet address 00:04:ac:24:63:c8
pcmcia1: card irq 4
nfs server parsley:/home/ftp: not responding
nfs server parsley:/home/ftp: is alive again
tr2 detached
tr2 at pcmcia0 function 0 port 0xa20-0xa27: IBM Token Ring 4/16
tr2: address 08:00:5a:fa:8a:e9 ring speed 16 Mbps
tr2 detached

----Next_Part(Fri_Aug_24_01:37:48_2001_234)----