On Fri, 27 Jul 2001 Manuel Bouyer wrote:
>
> On Sun, Jul 22, 2001 at 02:33:34PM -0700, Gerald C. Simmons wrote:
> > O.K.  Here it is (from booting boot1.fs then boot2.fs of NetBSD-1.5.1):
> > 
> > (null)(c0821d40,c05a9d14,c02ac68e,1,c05a9d24) at 0xc024e108
> > (null)(1) at 0xc02ac6d7
> > (null)(c0821d40,c058f0a0,c05a9d2c,c0101030,c081ee00) at 0xc02ac68e
> > (null)(c081ee00) at 0xc02ab769
> > (null)(0,0,10,10,c058f0a0) at 0xc0101030
> > (null)(c081ee44,c0365524,0,306370,0) at          0
> > 
> > Hope you know what it means!!
> 
> Just had some time to look at it, sorry.
> Well, it's not really interesting, unfortunably. What we have here is the stack
> since the keyboard interrupt. Before that we have 0 which isn't a valid
> function address :(
> 
> However, one thing you can do it boot this floppy set with '-d', and at 
> db promt:
> write c0365a48 ff
> c
> 
> Now the aic driver should tell what's he's doing.
> 

I also compiled a custom kernel with makeoptions DEBUG="-g", and got a very complete trace.
Just ask if you want it. 

Here are the boot messages:

NetBSD 1.5.1 (INSTALL)
cpu0: Intel Pentium (P54C) (586-class), 199.44 MHz
total mem  = 127 MB
avail mem = 115 MB
using 1659 buffers containing 6795264 bytes of memory
BIOS32 rev. 0 found at 0xfb330
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439HX System Controller (TXC) (rev. 0x02)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
pciide0 at pci0 dev 7 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <WDC WD43AA>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 4112MB, 8355 cyl, 16 head, 63 sec, 512 bytes/sect x 8421840 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: disabling secondary channel (no drives)
ep1 at pci0 dev 18 function 0: 3Com 3c590 Ethernet
ep1: interrupting at irq 10
ep1: address 00:a0:24:4a:d5:0a, 32KB byte-wide FIFO, 1:1 Rx:Tx split
ep1: 10baseT, 10baseT-FDX, 10base5, 10base2 (default 10baseT)
vga1 at pci0 dev 19 function 0: ATI Technologies product 0x5245 (rev. 0x00)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
isa0 at pcib0
aic: probing for aic-chip
AIC found ID: (C)1991ADAPTECAIC6360		chip revision 1
aic0 at isa0 port 0x340-0x35f irq 11
aic: probing for aic-chip
AIC found ID: (C)1991ADAPTECAIC6360		chip revision 1
aicattach scsibus0 at aic0: 8 targets, 8 luns per target
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa 0 port 0x60-0x6f irq 1 : color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: 1.2MB, 80 cyl, 2 head, 15 sec
isapnp0: no ISA Plug 'n Play devices found
biomask fbe5 netmask ffe5 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle ...
aic_scsi_cmd[0x0,6]->0 selecting 0:0