On 2001.07.26 19:31, Chris Pinnock wrote:
> On Wed, Jul 25, 2001 at 11:08:01PM +0200, Christoph Kaegi wrote:
> > The generic kernel boots fine, but when I try to boot a
> > customizezed kernel, it just stops booting at the following
> > line: 
> [snip]
> 
> Can you send the full output of "dmesg" with a GENERIC kernel (or
> GENERIC_LAPTOP kernel if your machine is a laptop)?
> 

This is the output of the GENERIC Kernel:

--------------------------- 8< ---------------------------------

NetBSD 1.5.1 (GENERIC) #56: Mon Jul  2 15:54:23 CEST 2001
    he@nsa.uninett.no:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 807.24 MHz
total memory = 511 MB
avail memory = 468 MB
using 6573 buffers containing 26292 KB of memory
BIOS32 rev. 0 found at 0xf0f50
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0305 (rev. 0x02)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0x8305 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Matrox MGA Millennium II 2164WA-B AG (rev. 0x00)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x22)
pciide0 at pci0 dev 4 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA66 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 0: <PCRW804, 4VO2043DH07115, 2.0> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at irq 14
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 4 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x10)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 4 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x10)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 4 function 4
pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x30)
cmpci0 at pci0 dev 9 function 0: CMI8738 PCI Audio Device
cmpci0: interrupting at irq 5
audio0 at cmpci0: full duplex, mmap, independent
ep0 at pci0 dev 10 function 0: 3Com 3c590 Ethernet
ep0: interrupting at irq 15
ep0: address 00:a0:24:4a:ef:57, 32KB byte-wide FIFO, 1:1 Rx:Tx split
ep0: 10baseT, 10baseT-FDX, 10base5, 10base2 (default 10base2)
pciide1 at pci0 dev 17 function 0: Promise Ultra100/ATA Bus Master IDE Accelerator (rev. 0x02)
pciide1: bus-master DMA support present
pciide1: primary channel configured to native-PCI mode
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <IBM-DTLA-307030>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 29314 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 60036480 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (using DMA data transfers)
pciide1: secondary channel configured to native-PCI mode
wd1 at pciide1 channel 1 drive 0: <IBM-DTLA-307030>
wd1: drive supports 16-sector pio transfers, lba addressing
wd1: 29314 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 60036480 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 (using DMA data transfers)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 6f65 netmask ef65 ttymask ffe7
uhub2 at uhub1 port 2
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
--------------------------- 8< ---------------------------------

Regards

Chris
-- 
----------------------------------------------------------------------
Christoph Kaegi                                           kgc@zhwin.ch
----------------------------------------------------------------------