Manuel Bouyer wrote:

> 
> Could you post the dmesg please ?
> 
> --
> Manuel Bouyer <bouyer@antioche.eu.org>
> --
> 
> Dear Manuel,

Here is the dmesg output:

NetBSD 1.5.1 (GENERIC) #56: Mon Jul  2 15:54:23 CEST 2001
    he@nsa.uninett.no:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Duron (686-class), 601.41 MHz
total memory = 127 MB
avail memory = 113 MB
using 1658 buffers containing 6632 KB of memory
BIOS32 rev. 0 found at 0xfdb50
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0305 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0x8305 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: S3 Savage4 (rev. 0x04)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x40)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA1
00 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <WDC WD136BA>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 13042 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 26712000 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <CR-48X5TE, 1C02NH0074, 1.8A> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
sd0 at atapibus0 drive 1: <IOMEGA  ZIP 100       ATAPI, , 03.H> type 0 direct re
movable
sd0: drive offline
sd0: 32-bit data port
sd0: drive supports PIO mode 3, DMA mode 1
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
sd0(pciide0:1:1): using PIO mode 3, DMA mode 1 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0
x16)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller (rev. 0
x16)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
VIA Technologies VT82C686A SMBus Controller (SMBus serial bus, revision 0x40) at
 pci0 dev 7 function 4 not configured
ex0 at pci0 dev 13 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0
x78)
ex0: interrupting at irq 12
ex0: MAC address 00:01:03:ce:9d:13
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
eap0 at pci0 dev 14 function 0: Ensoniq CT5880 (rev. 0x03)
eap0: interrupting at irq 9
eap0: SigmaTel STAC9708 codec; 18 bit DAC, 18 bit ADC, Rockwell 3D
audio0 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
eap1 at pci0 dev 15 function 0: Ensoniq CT5880 CT5880C (rev. 0x02)
eap1: interrupting at irq 10
eap1: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, Rockwell 3D
audio1 at eap1: full duplex, mmap, independent
midi1 at eap1: AudioPCI MIDI UART
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ed65 netmask fd65 ttymask fde7

pciide0:1:1: pio setting rejected, falling back to PIO mode 0
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
sd0(pciide0:1:1): using PIO mode 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

--Video Mike--