hello,
I have an i386 NetBSD in 1.4.2, and after an update it persists
alot of little problems; there is the two first.

first problem:
==============
X is not starting cause of the mouse not configure, there is the 
output of the startx process:
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0,
vendor release 6300)
Release Date: December 20 1999
	If the server is older
than 6-12 months, or if your card is newer
	than the above date, look for a
newer version before reporting
	problems.  (see
http://www.XFree86.Org/FAQ)
Operating System: NetBSD/i386 1.5 [ELF] The
NetBSD Foundation, Inc.
Configured drivers:
  SVGA: server for SVGA
graphics adaptors (Patchlevel 1):
      NV1, STG2000, RIVA 128, RIVA TNT,
RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA
INTEGRATED, GeForce 256,
      GeForce DDR, Quadro, ET4000, ET4000W32,
ET4000W32i, ET4000W32i_rev_b,
      ET4000W32i_rev_c, ET4000W32p,
ET4000W32p_rev_a, ET4000W32p_rev_b,
      ET4000W32p_rev_c,
ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
      wd90c00, wd90c10,
wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
      sis86c201,
sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
      sis5598,
sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,

tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,

tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,

 tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,

tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,

cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,

clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,

clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,

clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,

clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,

 mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,

 oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,

ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,

 ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D,

s3_savage, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,

ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,

ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,

ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,

 Voodoo Banshee, Voodoo3, smi, generic
Using pcvt driver (version
3.32)
XF86Config: /root/XF86Config
(**) stands for supplied, (--) stands
for probed/default values
(**) XKB: keymap: "xfree86(fr)" (overrides other
XKB settings)
(**) Mouse: type: Busmouse, device: /dev/pms0, buttons:
3
(**) SVGA: Graphics device ID: "Generic VGA"
(**) SVGA: Monitor ID: "My
Monitor"
(--) SVGA: Mode "640x480" needs vert refresh rate of 100.02 Hz.
Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 100.03 Hz.
Deleted.
(--) SVGA: Mode "1024x768" needs vert refresh rate of 100.01 Hz.
Deleted.
(--) SVGA: Mode "1152x864" needs vert refresh rate of 99.35 Hz.
Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz.
Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz.
Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz.
Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz.
Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/l
ib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/
X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X
11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: S3
Trio32/64 rev 84, Memory @ 0xf4000000
RENDITION: vendor 0x8086 chip
0x1237
RENDITION: vendor 0x8086 chip 0x7000
RENDITION: vendor 0x8086 chip
0x7010
RENDITION: vendor 0x1011 chip 0x21
RENDITION: vendor 0x5333 chip
0x8811
RENDITION: vendor 0x10b7 chip 0x9050
RENDITION: vendor 0x9004 chip
0x8178
(**) SVGA: chipset:  generic
(--) SVGA: videoram: 64k
(--) SVGA:
clocks:  25.18
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--)
SVGA: Using builtin driver modes
(--) SVGA: Builtin Mode: 320x200
(--)
SVGA: Virtual resolution set to 320x204
(--) SVGA: SpeedUp code selection
modified because virtualX != 1024
System: `/usr/X11R6/lib/X11/xkb/xkbcomp
-w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m fr -em1 "The XKEYBOARD keymap
compiler (xkbcomp) reports:" -emp "> " -eml "Errors from xkbcomp are not
fatal to the X server" keymap/xfree86 compiled/xfree86.xkm'

Fatal server
error:
Cannot open mouse (Device not configured)


When reporting a problem
related to a server crash, please send
the full server output, not just the
last messages

X connection to :0.0 broken (explicit kill or server shutdown).


#####################################################################

second problem:
===============
I have a problm with he pseudo terminals, fonts are not founded;
there is the the dmsg file:

NetBSD 1.5 (GENERIC) #1: Sun Nov 19 21:42:11 MET 2000

fvdl@sushi:/work/trees/netbsd-1-5/sys/arch/i386/compile/GENERIC
cpu0: Intel
Pentium Pro (686-class)
total memory = 65148 KB
avail memory = 55268
KB
using 839 buffers containing 3356 KB of memory
BIOS32 rev. 0 found at
0xffe90
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0:
i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel
82441FX PCI and Memory Controller (PMC) (rev. 0x02)
pcib0 at pci0 dev 13
function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev.
0x01)
pciide0 at pci0 dev 13 function 1: Intel 82371SB IDE Interface
(PIIX3) (rev. 0x00)
pciide0: bus-master DMA support present
pciide0:
primary channel wired to compatibility mode
pciide0: disabling primary
channel (no drives)
pciide0: secondary channel wired to compatibility
mode
pciide0: secondary channel ignored (disabled)
ppb0 at pci0 dev 14
function 0: Digital Equipment DECchip 21052 PCI-PCI Bridge (rev. 0x01)
pci1
at ppb0 bus 1
pci1: i/o space, memory space enabled
ex0 at pci1 dev 8
function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
ex0: interrupting at
irq 11
ex0: MAC address 00:c0:4f:b6:5b:e0
nsphy0 at ex0 phy 24: DP83840
10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
ahc1 at pci1 dev 11 function 0
ahc1: interrupting at
irq 10
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at
ahc1 channel 0: 16 targets, 8 luns per target
vga1 at pci0 dev 16 function
0: S3 Trio32/64 (rev. 0x54)
wsdisplay0 at vga1: console (80x25, vt100
emulation)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a,
working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working
fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0:
using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using
wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux
slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
sb0 at isa0
port 0x220-0x237 irq 5 drq 1 drq2 5: dsp v4.13
audio0 at sb0: full duplex,
mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1
at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC
speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play
device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0
port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head,
18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask e745 netmask ef45
ttymask ffc7
scsibus0: waiting 2 seconds for devices to settle...
ahc1:
target 0 using 8bit transfers
ahc1: target 0 synchronous at 10.0MHz, offset
= 0xf
ahc1: target 0 using tagged queuing
sd0 at scsibus0 target 0 lun 0:
<SEAGATE, ST32550N, 0019> SCSI2 0/direct fixed
sd0: 2047 MB, 3511 cyl, 11
head, 108 sec, 512 bytes/sect x 4194058 sectors
ahc1: target 1 using 8bit
transfers
ahc1: target 1 synchronous at 10.0MHz, offset = 0xf
ahc1: target
1 using tagged queuing
sd1 at scsibus0 target 1 lun 0: <QUANTUM, FIREBALL
SE8.4S, PJ0A> SCSI2 0/direct fixed
sd1: 8191 MB, 7637 cyl, 8 head, 274 sec,
512 bytes/sect x 16777215 sectors
ahc1: target 5 using 8bit transfers
ahc1:
target 5 synchronous at 10.0MHz, offset = 0xf
cd0 at scsibus0 target 5 lun
0: <NEC, CD-ROM DRIVE:462, 1.14> SCSI2 5/cdrom removable
sd0: no disk
label
boot device: sd1
root on sd1a dumps on sd1b
root file system type:
ffs
vga_init_screen: no font
wsdisplay0: screen 1 added (80x50, vt100
emulation)
vga_init_screen: no font
wsdisplay0: screen 2 added (80x50,
vt100 emulation)
vga_init_screen: no font
wsdisplay0: screen 3 added
(80x50, vt100 emulation)
vga_init_screen: no font
wsdisplay0: screen 4
added (80x50, vt100 emulation)
wsmux1: connecting to wsdisplay0
fdcresult:
timeout
fd0: timeout (st0 20<seek_cmplt> cyl 0)
fdcresult: timeout
fd0:
timeout (st0 20<seek_cmplt> cyl 0)
fdcresult: timeout
fd0: timeout (st0
20<seek_cmplt> cyl 0)
fdcresult: timeout
fd0: timeout (st0 20<seek_cmplt>
cyl 0)
fdcresult: timeout
fd0: timeout (st0 20<seek_cmplt> cyl
0)
fdcresult: timeout
fd0: timeout (st0 20<seek_cmplt> cyl 0)
fd0a: hard
error reading fsbn 0 (st0 20<seek_cmplt> st1 0 st2 0 cyl 0 head 0 sec
0)
sd0: no disk label

###########################################################################
I think those are minor problems.
Bye.
R.