Subject: Re: This isn't very helpful on setting up a modem
To: None <tls@rek.tjls.com>
From: None <stripes@tigerlair.com>
List: port-i386
Date: 05/09/2001 09:35:22
Thor Lancelot Simon enscribed:
> On Tue, May 08, 2001 at 06:50:49PM -0500, Frederick Bruckman wrote:
> > 1) Create a file, "/etc/uucp/port", with the following lines:
> >
> > port modem
> > type modem
> > device /dev/tty03
> > speed 115200
> >
> > 2) As root, type "cu -p modem". If the modem is supported, you'll be
> > able to enter "AT" commands (try "at", "at&v", "ati11", "ati13",
> > "atli5"). Exit from "cu" by typing "~." (that's "tilde", then
> > "period", without the quotes).
>
> This won't quite work, if the modem really does fail to work at all without
> hardware flow control. It won't work because AFAIK there is no way to set
> hardware flow control from within 'cu'.
You're right. It didn't work last night. Neither did minicom (hardware flow
control was on, software off).
> After you start the 'cu', suspend it (^Z or <ret>~^Z depending how far it's
> gone since you ran it) and type "stty -f /dev/tty03 crtscts". Then you will
> be testing the documented behaviour.
I'll try it and see what happens.
> To get crtscts turned on all the time on that tty, add "rtscts" (NOT
> "crtscts") to the /dev/tty03 line in /etc/ttys and run ttyflags -a or
> reboot (which will run ttyflags -a for you). You could do that, then try
> the cu test, too.
Thanks for your help, I really do appreciate it.
-AC
--
For sincere personal advice (\`--/') _ _______ .-r-.
and the correct time: >.~.\ `` ` `,`,`. ,'_'~`.
phone any number (v_," ; `,-\ ; : ; \/,-~) \
at random at 3am. `--'_..),-/ ' ' '_.>-' )`.`.__.')
stripes at tigerlair dot com ((,((,__..'~~~~~~((,__..' `-..-'fL