>
> Can you forward us your dmesg output please?
>

NetBSD 1.5 (VPN) #0: Sun May  6 05:02:36 PDT 2001
    root@vpn2:/usr/src/sys/arch/i386/compile/VPN
cpu0: Intel Pentium (P54C) (586-class)
total memory = 24192 KB
avail memory = 17744 KB
using 328 buffers containing 1312 KB of memory
BIOS32 rev. 0 found at 0xf819d
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82437FX System Controller (TSC) (rev. 0x02)
rtk0 at pci0 dev 6 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 9
rtk0: Ethernet address 00:02:44:04:b8:16
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rtk1 at pci0 dev 7 function 0: RealTek 8139 10/100BaseTX
rtk1: interrupting at irq 11
rtk1: Ethernet address 00:00:21:d4:39:c8
ukphy1 at rtk1 phy 7: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000000, model 0x0000, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 13 function 0: S3 Trio32/64 (rev. 0x00)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 15 function 0
pcib0: Intel 82371FB PCI-to-ISA Bridge (PIIX) (rev. 0x02)
pciide0 at pci0 dev 15 function 1: Intel 82371FB IDE controller (PIIX) (rev.
0x0
2)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <WDC AC2420H>
wd0: drive supports 16-sector pio transfers, chs addressing
wd0: 405 MB, 989 cyl, 15 head, 56 sec, 512 bytes/sect x 830760 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 3
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 3
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask f565 netmask ff65 ttymask ffe7
IPsec: Initialized Security Association Processing.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0

This what it said.

David Kwok