Have you made sure the sound is turned up?  Grab one of the mixer utilities
to make sure.  It seems to me that the default sound level is very low (as
in down all the way).  You can also use sysctl's to change the settings, but
I don't have a machine that has audio built in, so I can't point you any
closer than that.

Dave

> -----Original Message-----
> From: port-i386-owner@netbsd.org [mailto:port-i386-owner@netbsd.org]On
> Behalf Of Jean françois Briel
> Sent: Tuesday, March 06, 2001 5:39 AM
> To: port-i386@netbsd.org
> Subject: no sound with muse card
>
>
> Hello !
>   I got a muse card from Guillemot based on a cmi 8738 chip. It
> is detected
> at boot without problems (please see joined dmes output).
> soundplay or xwave
> execute flawlessly, they just fail to deliver any sound,both on
> /dev/audio0
> and /dev/sound0. Any advice ?
>
>                                                                    Thanks
> for your help
>
>
> Jean Francois Briel
> Ps : i installed NetBsd from wasabi systems cd
>
> NetBSD 1.5 (KERN1) #0: Thu Feb  1 22:48:44 GMT 2001
>     root@:/usr/src/sys/arch/i386/compile/KERN1
> cpu0: AMD K7 (Athlon) (686-class)
> total memory = 127 MB
> avail memory = 115 MB
> using 1659 buffers containing 6636 KB of memory
> BIOS32 rev. 0 found at 0xfb220
> mainbus0 (root)
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled
> pchb0 at pci0 dev 0 function 0
> pchb0: VIA Technologies product 0x0305 (rev. 0x02)
> ppb0 at pci0 dev 1 function 0: VIA Technologies product 0x8305 (rev. 0x00)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> vga1 at pci1 dev 0 function 0: Nvidia Corporation RIVA TNT2 Model 64 (rev.
> 0x15)
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> pcib0 at pci0 dev 7 function 0
> pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge
> (rev. 0x22)
> pciide0 at pci0 dev 7 function 1: VIA Tech VT82C586A IDE Controller (rev.
> 0x10)
> pciide0: bus-master DMA support present
> pciide0: primary channel configured to compatibility mode
> wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct08 13>
> wd0: drive supports 16-sector pio transfers, lba addressing
> wd0: 12416 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x
> 25429824 sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
> pciide0: primary channel interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
> transfers)
> pciide0: secondary channel configured to compatibility mode
> atapibus0 at pciide0 channel 1
> cd0 at atapibus0 drive 1: <Memorex  482E CD-ROM, MT1198 B Firmware, M2.0>
> type 5 cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> wd1 at pciide0 channel 1 drive 0: <ST34323A>
> wd1: drive supports 32-sector pio transfers, lba addressing
> wd1: 4112 MB, 8912 cyl, 15 head, 63 sec, 512 bytes/sect x 8421840 sectors
> wd1: 32-bit data port
> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> pciide0: secondary channel interrupting at irq 15
> wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
> transfers)
> cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
> transfers)
> uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller
> (rev. 0x10)
> uhci0: interrupting at irq 5
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller
> (rev. 0x10)
> uhci1: interrupting at irq 5
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> pchb1 at pci0 dev 7 function 4
> pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x30)
> Rockwell Semiconductor Systems product 0x1005 (undefined subclass 0xff,
> interface 0xff, revision 0x01) at pci0 dev 9 function 0 not configured
> cmpci0 at pci0 dev 10 function 0: CMI8738 PCI Audio Device
> cmpci0: interrupting at irq 5
> audio0 at cmpci0: full duplex, mmap, independent
> vr0 at pci0 dev 12 function 0: VIA VT3043 (Rhine) 10/100 Ethernet
> vr0: interrupting at irq 11
> vr0: Ethernet address: 00:50:ba:c7:ee:a3
> OUI 0x00606e model 0x0000 rev 0 at vr0 phy 8 not configured
> isa0 at pcib0
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> pckbc0 at isa0 port 0x60-0x64
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> lpt0 at isa0 port 0x378-0x37b irq 7
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: PC speaker
> sysbeep0 at pcppi0
> isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
> npx0 at isa0 port 0xf0-0xff: using exception 16
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> isapnp0: no ISA Plug 'n Play devices found
> apm0 at mainbus0: Power Management spec V1.2 (slowidle)
> biomask e76d netmask ef6d ttymask ffef
> wd1: no disk label
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
> wsmux1: connecting to wsdisplay0
>
>