Hello !
  I got a muse card from Guillemot based on a cmi 8738 chip. It is detected
at boot without problems (please see joined dmes output). soundplay or xwave
execute flawlessly, they just fail to deliver any sound,both on /dev/audio0
and /dev/sound0. Any advice ?

                                                                   Thanks
for your help


Jean Francois Briel
Ps : i installed NetBsd from wasabi systems cd

NetBSD 1.5 (KERN1) #0: Thu Feb  1 22:48:44 GMT 2001
    root@:/usr/src/sys/arch/i386/compile/KERN1
cpu0: AMD K7 (Athlon) (686-class)
total memory = 127 MB
avail memory = 115 MB
using 1659 buffers containing 6636 KB of memory
BIOS32 rev. 0 found at 0xfb220
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0305 (rev. 0x02)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0x8305 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation RIVA TNT2 Model 64 (rev.
0x15)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x22)
pciide0 at pci0 dev 7 function 1: VIA Tech VT82C586A IDE Controller (rev.
0x10)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct08 13>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 12416 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 25429824 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 1: <Memorex  482E CD-ROM, MT1198 B Firmware, M2.0>
type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <ST34323A>
wd1: drive supports 32-sector pio transfers, lba addressing
wd1: 4112 MB, 8912 cyl, 15 head, 63 sec, 512 bytes/sect x 8421840 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel interrupting at irq 15
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller
(rev. 0x10)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller
(rev. 0x10)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 4
pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x30)
Rockwell Semiconductor Systems product 0x1005 (undefined subclass 0xff,
interface 0xff, revision 0x01) at pci0 dev 9 function 0 not configured
cmpci0 at pci0 dev 10 function 0: CMI8738 PCI Audio Device
cmpci0: interrupting at irq 5
audio0 at cmpci0: full duplex, mmap, independent
vr0 at pci0 dev 12 function 0: VIA VT3043 (Rhine) 10/100 Ethernet
vr0: interrupting at irq 11
vr0: Ethernet address: 00:50:ba:c7:ee:a3
OUI 0x00606e model 0x0000 rev 0 at vr0 phy 8 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2 (slowidle)
biomask e76d netmask ef6d ttymask ffef
wd1: no disk label
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0