Hi...

I'm a bit worried about what's wrong with my wd0 in these messages in
"dmesg |grep wd". As you can see I have one 30.7GB drive and on 4.3GB
drive both Fujitsu.

-----------
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPG3307AT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 29319 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 60046560
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
wd1 at pciide0 channel 0 drive 1: <FUJITSU MPA3043ATU>
wd1: drive supports 32-sector pio transfers, lba addressing
wd1: 4172 MB, 9042 cyl, 15 head, 63 sec, 512 bytes/sect x 8544940 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
wd1: no disk label
boot device: wd0
root on wd0a dumps on wd0b
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1 (using DMA data
transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
wd0a: aborted command, interface CRC error writing fsbn 16 of 16-31 (wd0
bn 79; cn 0 tn 1 sn 16), retrying
wd0: soft error (corrected)
/dev/wd0e: file system not clean (fs_flags=20); please fsck(8)

	/Roine

=======================Astrakan==========================
E-Mail: roine@thunberg.net              ICQ-UIN: 3586115
=========================================================