Brian Chase writes:
> Yup, I've gotten some decent feedback from people "out of band" from the
> mailing list.  I guess there was a Slashdot article last week on the n|c.
> 
>   http://slashdot.org/article.pl?sid=00/11/08/0519206&mode=thread

I've had mine for months. :-) 

> And within that there's a link to a site which gives more details on the
> hardware and software setup of the boxes.
> 
>   http://www.geocities.com/bozolovesya2000/

See the dmesg below to see what NetBSD -current thinks about it all.

> We really should have NetBSD running on this little fellow.

Well, I forwarded some info to Jason, so hopefully he will figure out how
to fix it.  He is the ethernet master. :)

It works ok with USB ethernet (generates usb errors though) so it isn't
necessary to burn a new CDRW everytime you want to boot a test kernel.

A working PXEBOOT would be sweet though.  It is able to load a hacked up
binary I made which just prints a few lines, so I guess the BIOS PXE
support is working.

-Andrew


NetBSD 1.5I (GENERIC) #2: Mon Nov 13 18:26:00 EST 2000
    root@apollo.vaultron.com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Cyrix 6x86 (486-class)
total memory = 63100 KB
avail memory = 53288 KB
using 814 buffers containing 3256 KB of memory
BIOS32 rev. 0 found at 0xfb640
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System 5597/5598 host bridge (rev. 0x10)
pcib0 at pci0 dev 1 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0x01)
pciide0 at pci0 dev 1 function 1: Silicon Integrated System 5597/5598 IDE controller (rev. 0xd0)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 0: <ATAPI 24X CDROM, , VER-3.8> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0 at pciide0 channel 0 drive 1: <Feiya Micro Disk>
wd0: drive supports 1-sector pio transfers, lba addressing
wd0: 3968 KB, 124 cyl, 2 head, 32 sec, 512 bytes/sect x 7936 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4
pciide0: primary channel interrupting at irq 14
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
wd0(pciide0:0:1): using PIO mode 4
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (disabled)
ohci0 at pci0 dev 1 function 2: Silicon Integrated System 5597/5598 USB host controller (rev. 0x10)
ohci0: interrupting at irq 3
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
sip0 at pci0 dev 11 function 0: SiS 900 10/100 Ethernet
sip0: interrupting at irq 7
sip0: Ethernet address 00:e0:06:e7:f7:25
ukphy0 at sip0 phy 0: Generic IEEE 802.3u media interface
ukphy0: SiS 900 10/100 media interface (OUI 0x000760, model 0x0000), rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cmpci0 at pci0 dev 15 function 0: CMI8738 PCI Audio Device
cmpci0: interrupting at irq 11
audio0 at cmpci0: full duplex, mmap, independent
C-Media Electronics Inc HSP56 Audiomodem Riser (miscellaneous communications, revision 0x10) at pci0 dev 15 function 1 not configured
vga1 at pci0 dev 20 function 0: Silicon Integrated System 5597/5598 integrated VGA (rev. 0x68)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
biomask e77d netmask e7fd ttymask f7ff
aue0 at uhub0 port 1
aue0: SMC, Inc EZ USB/Ethernet Converter, rev 1.10/1.01, addr 2
aue0: Ethernet address 00:e0:29:59:e8:c2
ukphy1 at aue0 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000895, model 0x0021, rev. 11
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
boot device: wd0
root device (default wd0a): aue0
dump device: 
file system (default generic): 
root on aue0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP server: 192.168.44.1
nfs_boot: my_domain=vaultron.com
nfs_boot: my_addr=192.168.44.17
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.44.2
root on 192.168.44.1:/u1/iopener2
root file system type: nfs
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
aue0: 0 usb errors on intr: IOERROR
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR
aue0: 0 usb errors on intr: IOERROR