On Mon, Oct 30, 2000 at 03:32:19PM -0500, Bill Squier wrote:
> On Mon, Oct 30, 2000 at 06:10:53PM +0000, Patrick Welche wrote:
> > I am having trouble with a sony vaio pcg-z600re, which I think is labelled
> > 505 something in the US, and I think the reason is:
> > 
> > uhci0: interrupting at irq 9
> > fxp0: interrupting at irq 9
> > cbb0: interrupting at irq 9
> > 
> > they're all on irq 9. I have
> 
> You can share interrupts.  What trouble are you having?

Trust my luck: the first problem is no longer repeatable, but it was:

- boot up connected to network / dhclient
- connect USB floppy containing msdos disk
- cp file from floppy to hard disk

got a lot of

Oct 30 15:16:43  /netbsd: umass0: CBI reset failed, IOERROR
Oct 30 15:16:43  /netbsd: umass0: CBI bulk-in stall clear failed, IOERROR
Oct 30 15:16:43  /netbsd: umass0: CBI bulk-out stall clear failed, IOERROR

whereas booting without a network/dhclient was fine.

Problem which remains:

- boot up connected to network / dhclient
- ping neighbouring computer
- insert pcmcia/cd rom drive
- ping stops, in fact computer freezes completely
- remove pcmcia/cd rom drive
- wait a few seconds and all springs to life again / ping continues


In fact this is all sounding more like just a "the pcmcia cd rom bit doesn't
work" problem rather than a combination of devices.. So maybe the irq thing
is a red herring. Any other ideas?

Cheers,

Patrick

PS 1.5H with source from 23 Oct, and:

pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info:  , NinjaATA-, V1.0, AP00
pcmcia0: Manufacturer code 0xffffffff, product 0xffffffff
pcmcia0: function 0: unspecified, ccr addr 200 mask 3
pcmcia0: function 0, config table entry 33: I/O card; irq mask d068; iomask 10, iospace 180-187 386-387; memspace 0-fff; io8 io16 irqlevel
pcmcia0: function 0, config table entry 34: I/O card; irq mask d068; iomask 10, iospace 190-197 396-397; memspace 0-fff; io8 io16 irqlevel
pcmcia0: function 0, config table entry 35: I/O card; irq mask d068; iomask 10, iospace 1a0-1a7 3a6-3a7; memspace 0-fff; io8 io16 irqlevel
wdc2 at pcmcia0 function 0: TEAC IDE Card/II
wdc2 detached