I have my notebook setup for serial console, because I am debugging some X
stuff.
  I can't type on the keyboard.... In fact, looking at the boot messages,
I just realized why, it never says:


wskbd0 at pckbd0: console keyboard, using wsdisplay0

  Not surprising, as this isn't the console.
  Can I force this from wscons.conf somehow?

NetBSD 1.5_ALPHA2 (XTERM) #3: Sun Oct  1 12:42:01 EDT 2000
    mcr@marajade:/mara/mcr/corp/network/kernels/compile-current/XTERM
cpu0: Intel Pentium III (E) (686-class)
total memory = 127 MB
avail memory = 114 MB
using 1657 buffers containing 6628 KB of memory
BIOS32 rev. 0 found at 0xfe0db
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: S3 Savage/IX+MV (rev. 0x11)
wsdisplay0 at vga1
wsdisplay0: screen 0-6 added (80x25, vt100 emulation)
pcib0 at pci0 dev 5 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 5 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1214GAP>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 11513 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 23579136 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-C2402, 7000007474, 1317> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 5 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x03) at pci0 dev 5 function 3 not configured
cbb0 at pci0 dev 11 function 0: Toshiba America Info Systems ToPIC95B CardBus-PCI Bridge (rev. 0x07)
cbb1 at pci0 dev 11 function 1: Toshiba America Info Systems ToPIC95B CardBus-PCI Bridge (rev. 0x07)
ESS Technology Inc Maestro 2E PCI Audio Accelerator (audio multimedia, revision 0x10) at pci0 dev 12 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0
opms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
cbb0: interrupting at irq 11
cbb0: cacheline 0x0 lattimer 0x0
cbb0: bhlc 0x824000 lscp 0x141400
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 20 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cbb1: cacheline 0x0 lattimer 0x0
cbb1: bhlc 0x824000 lscp 0x151500
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 21 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
apm0 at mainbus0: Power Management spec V1.2
biomask ef6d netmask ef6d ttymask ffef
IPsec: Initialized Security Association Processing.
ep0 at pcmcia0 function 0: 3Com 3c589 10Mbps Ethernet
ep0: address 00:a0:24:ac:5c:52, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs