Subject: 1.4.2 fails on my new pIII system.
To: None <port-i386@netbsd.org>
From: Brian Buhrow <buhrow@lothlorien.nfbcal.org>
List: port-i386
Date: 10/06/2000 01:45:53
	I tried to run the installation floppies on my shiny new pIII machine.
After it asked me to insert the second floppy, it paniced with a trap in
supervisor mode. I then tried booting my trusty 1.2G installation floppy.
this worked flawlessly, and I was able to disklabel and newfs the hard
disk.  Of course, networking still didn't work, but I figured I'd put a
1.4.2 kernel on the system via a floppy disk, reboot, and voila! I'd have
networking, and all the device support I could imagine.
	Imagine what surprise I experienced when suddenly 1.4.2
GENERIC_TINY didn't recognize any pci bus, any pci-isa bridge, and then
paniced just after printing out the presence of the graphics adaptor.
Anyone have any idea what's going on here?  I've got the boot messages
below.
-thanks
-Brian

P.S.  I'm using the fairly new Pc Weasel card in this system, and the trace
looks like its bombing out in the pccons driver.  Anyone know if that's
changed significantly between 1.2 and 1.4?


Script started on Fri Oct  6 01:38:28 2000
%kermit
set C-Kermit 5A(190), 4 Oct 94, for NetBSD
 Copyright (C) 1985, 1994,
  Trustees of Columbia University in the City of New York.
Type ? or HELP for help.
C-Kermit>set line /dev/tty01
C-Kermit>set speed 9600
/dev/tty01, 9600 bps
C-Kermit>c
Connecting to /dev/tty01, speed 9600.
The escape character is Ctrl-\ (ASCII 28, FS)
Type the escape character followed by C to get back,
or followed by ? to see other options.
reboot

The operating system has halted.
Please press any key to reboot.

rebooting...

>> NetBSD/i386 BIOS Boot, Revision 2.2
>> (buhrow@moria.nfbcal.org, Wed Feb 25 06:07:06 PST 1998)
>> Memory: 640/129984 k
Use hd1a:netbsd to boot sd0 when wd0 is also installed
Press return to boot now, any other key for boot menu
booting wd0a:netbsd - starting in 543210
|/-\|1282048/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+53248-\|/-\+155996+[76284|/-\|/-\|/+87416]-\|/-\|/-\=0x1940d4
[ netbsd ELF symbol table not valid ]
[ preserving 163700 bytes of netbsd a.out symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4.2 (GENERIC_TINY) #1: Mon Mar 13 01:24:35 PST 2000
    toddpw@vader.toddpw.net:/usr/src/sys/arch/i386/compile/GENERIC_TINY
cpu0: family 6 model 8 step 3
cpu0: Intel Pentium Pro, II or III (686-class)
real mem  = 133758976
avail mem = 122236928
using 1658 buffers containing 6791168 bytes of memory
mainbus0 (root)
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <FUJITSU MPF3102AT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 9773MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 20015856 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus0 at wdc1 channel 0
cd0 at atapibus0 drive 0: <CD-ROM 50X L, , 15> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
lpt0 at isa0 port 0x378-0x37b irq 7
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1kernel: page fault trap, code=0
Stopped in  at  _fillw+0x19:    repe stosl      %es:(%edi)
db> trae ce
_fillw(0,c023a114,c0297d70,c0142487,c0526f80) at _fillw+0x19
_pcattach(c0526f80,c0526e00,c0297d98,c0526e00,c0297d98) at _pcattach+0x19
_config_attach(c0526f80,c023a0bc,c0297d98,c02159b0) at _config_attach+0x2b7
_isasearch(c0526f80,c023a0bc,0,c0239a60,c023a0d0) at _isasearch+0x8f
_mapply(c0297e08,c023a0bc) at _mapply+0x1b
_config_search(c0215a64,c0526f80,0,0,c023a114) at _config_search+0x75
_isaattach(c0526fc0,c0526f80,c0297ed4,c0526f80,c0297ed4) at _isaattach+0x5c
_config_attach(c0526fc0,c0239e8c,c0297ed4,c0215898,c0526fc0) at _config_attach+
0x2b7
_config_found_sm(c0526fc0,c0297ed4,c0215898,0,0) at _config_found_sm+0x29
_mainbus_attach(0,c0526fc0,0,c0526fc0,0) at _mainbus_attach+0xa6
_config_attach(0,c0239e70,0,0,c0295010) at _config_attach+0x2b7
_config_rootfound(c01f4b9b,0) at _config_rootfound+0x37
_configure(c0135448,c023b688,c0295010,295000,29c000) at _configure+0x14
_main(0,0,0,0,0) at _main+0x5a
db> 
C-Kermit>
C-Kermit>quit
%exit
Script done on Fri Oct  6 01:40:54 2000