I restored  the 'vga0 at isa ?' line and everything works
(this is the version I put on the web).  Go figure :-)
I guess I had figured with AGP video, vga0 wasn't needed.
Doh.

Attached is my dmesg...  Off topic:  Any idea why my
SCSI hard drive won't run at 10MHz?

Thanks!

Brian

NetBSD 1.5E (BSD) #0: Tue Sep 12 19:01:53 EDT 2000
    root@bsd:/opt/src/sys/arch/i386/compile/BSD
cpu0: AMD K6-III (586-class)
cpu0: features 8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8021bf<PGE,MMX>
total memory = 127 MB
avail memory = 115 MB
using 1658 buffers containing 6632 KB of memory
BIOS32 rev. 0 found at 0xfb330
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C597 (Apollo VP3) Host-PCI Bridge (rev. 0x04)
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) PCI-AGP (rev. 0x00)
pci at ppb0 bus 1 not configured
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge (rev. 0x41)
pciide0 at pci0 dev 7 function 1: VIA Tech VT82C586A IDE Controller (rev. 0x06)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <ST34342A>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 4103 MB, 8894 cyl, 15 head, 63 sec, 512 bytes/sect x 8404830 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd1 at pciide0 channel 0 drive 1: <Maxtor 90720D5>
wd1: drive supports 16-sector pio transfers, lba addressing
wd1: 6869 MB, 13957 cyl, 16 head, 63 sec, 512 bytes/sect x 14068656 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 1: <FX240S, , j01> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:1): using PIO mode 3, DMA mode 1 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x02)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 7 function 3: VIA Technologies VT82C586 (Apollo VP) Power Management Controller (rev. 0x10)
ppb1: not configured by system firmware
isp0 at pci0 dev 8 function 0
isp0: Qlogic ISP Driver, NetBSD (pci) Platform Version 1.0 Core Version 2.0
isp0: interrupting at irq 11
isp0: Board Revision 1020, loaded F/W Revision 4.65.0
isp0: Last F/W revision was 1.27.0
isp0: 243 max I/O commands supported
isp0: driver initiated bus reset of bus 0
scsibus0 at isp0: 16 targets, 8 luns per target
tl0 at pci0 dev 10 function 0
tl0: Compaq Netelligent 10/100 TX
tl0: Ethernet address 00:08:c7:b1:8b:d4
tl0: interrupting at irq 4
nsphy0 at tl0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0 at tl0 phy 31: ThunderLAN 10baseT media interface, rev. 5
tlphy0: no media present
isa0 at pcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
lptprobe: mask ff data 55 failed
lpt1 at isa0 port 0x278-0x27b: polled
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
sb0 at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5
sb0: Creative SB16 PnP Audio: dsp v4.13
audio0 at sb0: full duplex, mmap, independent
mpu0 at sb0
midi0 at mpu0: SB MPU-401 MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
wdc2 at isapnp0 port 0x168/8,0x36e/2 irq 10
wdc2: Creative SB16 PnP IDE
isapnp0: <Creative SB16 PnP, PNPFFFF, , Reserved> port 0x100/1 not configured
isapnp0: <Creative SB16 PnP, CTL7001, PNPB02F, Game> port 0x200/8 not configured
biomask efc5 netmask efd5 ttymask ffd7
scsibus0: waiting 2 seconds for devices to settle...
isp0: Bus 0 Target 1 Async Mode 
sd0 at scsibus0 target 1 lun 0: <SEAGATE, ST32430N, 0346> SCSI2 0/direct fixed
isp0: Bus 0 Target 1 at 10MHz Max Offset 12, Tagged Queueing Enabled
isp0: bus reset destroyed command for 0.1.0
isp0: timeout initiated SCSI bus reset of bus 0

isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
sd0: 2047 MB, 3992 cyl, 9 head, 116 sec, 512 bytes/sect x 4194303 sectors
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
cd1 at scsibus0 target 4 lun 0: <, CRW620, 1.00> SCSI2 5/cdrom removable
isp0: Bus 0 Target 4 at 10MHz Max Offset 12 
isp0: Bus 0 Target 4 at 10MHz Max Offset 12 
isp0: Bus 0 Target 4 at 10MHz Max Offset 12 
isp0: Bus 0 Target 4 at 10MHz Max Offset 12 
isp0: Bus 0 Target 4 at 10MHz Max Offset 12 
isp0: Bus 0 Target 4 at 10MHz Max Offset 12 
isp0: Bus 0 Target 4 at 10MHz Max Offset 12 
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
boot device: wd0
root on wd0a dumps on wd0b
init: copying out path `/sbin/init' 11
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 6MHz Max Offset 12, Tagged Queueing Enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0