I was wondering if the messages below indicate cardbus support is not
there for my machine (Dell Inspiron 7500) or if its a pilot error.

Thanks
-Dan



NetBSD 1.5_ALPHA2 (HEESENG1) #0: Fri Sep  1 15:07:48 EDT 2000
    root@HEESENG1:/var/build/sys/HEESENG1
cpu0: Intel Pentium III (E) (686-class)
total memory = 127 MB
avail memory = 113 MB
using 1658 buffers containing 6632 KB of memory
BIOS32 rev. 0 found at 0xfd890
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Mach64 LM (rev. 0x64)
wsdisplay0 at vga1: console (80x25, vt100 emulation)


cbb0 at pci0 dev 4 function 0: Texas Instruments PCI1225 PCI-CardBus Bridge (rev. 0x01)
cbb0: NOT USED because of unconfigured interrupt
cbb1 at pci0 dev 4 function 1: Texas Instruments PCI1225 PCI-CardBus Bridge (rev. 0x01)
cbb1: NOT USED because of unconfigured interrupt
pcib0 at pci0 dev 7 function 0

does the unconfigured interrupt mean I did something wrong?


pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHK2120AT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 11513 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 23579136 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-7002B, , 1005> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
ESS Technology Inc Maestro 2E PCI Audio Accelerator (audio multimedia, revision 0x10) at pci0 dev 8 function 0 not configured
AT&T Microelectronics LTMODEM (miscellaneous communications, revision 0x01) at pci0 dev 16 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask efed netmask efed ttymask ffef
pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..7..9..10
pcic0: using irq 3 for socket events
IPsec: Initialized Security Association Processing.
ums0 at uhub0 port 1 configuration 1 interface 0
ums0: Logitech USB-PS/2 Trackball, rev 1.00/2.10, addr 2, iclass 3/1
ums0: 2 buttons
wsmouse1 at ums0 mux 0


pcic_chip_socket_enable: status c
pcic_wait_ready: ready never happened, status = 0c

this ^ only happens when I have a 3COM 3CCFE575CT-D cardbus ethernet card
installed (the reason for wanting cardbus to work).  I have 
ex*     at cardbus? dev ? function ?    # 3Com 3C575TX
in my config file.  

ep0 at pcmcia1 function 0 port 0x400-0x40f: 3Com 3c589 10Mbps Ethernet
ep0: address 00:10:4b:ed:d4:f5, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia1: card irq 7