Hi
 I have a i386 running 1.5_ALPHA and i get the above message
when trying a netstat command

mallow# netstat -rn
netstat: no namelist

Should i not be concerned with this and just update to ALPHA2 or am i
doing something wrong

The machine in questions has two ethernet interfaces and uses the 
roaringpenguin pppoe to setup a net connection. So far, so good (that is
how i wrote this message)

ifconfig -a follows

ne0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu
1500
        address: 00:e0:29:35:f0:1b
        media: Ethernet autoselect (10baseT)
        inet6 fe80::2e0:29ff:fe35:f01b%ne0 prefixlen 64 scopeid 0x1
ne1: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu
1500
        address: 00:00:b4:36:02:d8
        media: Ethernet 10base2
        inet 192.197.120.206 netmask 0xffffff00 broadcast 192.197.120.255
        inet6 fe80::200:b4ff:fe36:2d8%ne1 prefixlen 64 scopeid 0x2
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33228
        inet 127.0.0.1 netmask 0xff000000
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
        inet6 ::1 prefixlen 128
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
        inet 216.209.201.216 -> 216.209.201.1 netmask 0xffffff00
        inet6 fe80::2e0:29ff:fe35:f01b%ppp0 -> :: prefixlen 64 scopeid 0x4
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
strip0: flags=0<> mtu 1100
strip1: flags=0<> mtu 1100
tun0: flags=10<POINTOPOINT> mtu 1500
tun1: flags=10<POINTOPOINT> mtu 1500
gre0: flags=8010<POINTOPOINT,MULTICAST> mtu 1450
gre1: flags=8010<POINTOPOINT,MULTICAST> mtu 1450
ipip0: flags=8010<POINTOPOINT,MULTICAST>
ipip1: flags=8010<POINTOPOINT,MULTICAST>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
mallow#


Thanks

Chris

ps, the other strange thing is that even though net.inet.ip.forwarding is
set to one, the machine does not route from the 192.197.120.x to the net.