I have a compaq deskpro xe 466.  Have installed 1.4.2 with floppies and
can't seem to make the nic card work.

I think I have two issues, but my main objective is to get my nic card to
work.

1.) I have a ne1 and an ne2 but only one nic card installed! The dmesg.boot
has both listed with the same
mac address. The ne2 is at isapnp0.
2.) The ne1 and wss both have irq 10

I get ''ne1: device time out" when I try to ping out to my network.

I have tried booting in debug and issuing the commands listed in the i386
faq (http://www.netbsd.org/Ports/i386/faq.html#ne200-device-timeout) which
describe this error but I am either doing it wrong and/or leaving something,
but what?

My dmesg.boot follows ...

NetBSD 1.4.2 (GENERIC) #3: Wed Mar 15 23:41:54 PST 2000
    toddpw@vader.toddpw.net:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: family 4 model 3 step 5
cpu0: Intel 486DX2 (486-class)
real mem  = 16384000
avail mem = 11587584
using 225 buffers containing 921600 bytes of memory
mainbus0 (root)
isa0 at mainbus0
ne1 at isa0 port 0x300-0x31f irq 10
ne1: NE2000 (RTL8019) Ethernet
ne1: 10base2, 10baseT, 10baseT-FDX, auto, default auto
ne1: Ethernet address 00:e0:29:79:4a:7b
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <Maxtor 7541 AP>
wd0: drive supports 32-sector pio transfers, lba addressing
wd0: 518MB, 1052 cyl, 16 head, 63 sec, 512 bytes/sect x 1061390 sectors
wd0: drive supports PIO mode 4, DMA mode 2
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0: console (80x25, vt100 emulation)
lpt1 at isa0 port 0x278-0x27b: polled
wss0 at isa0 port 0x530-0x537 irq 10 drq 0: AD1848K
audio0 at wss0: half duplex
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
ne2 at isapnp0 port 0x200/32 irq 3
ne2: NE2000 (RTL8019) Ethernet
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default auto
ne2: Ethernet address 00:e0:29:79:4a:7b
biomask 4040 netmask 4448 ttymask 544a
wscons: wskbd0 glued to wsdisplay0 (console)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs





Bill Warrick
bwarrick2@earthlink.net