I do not see any jumper on it. The modem has FCC registration number:
CNTTAI-31396-M5-E.
I could not find any technical details from Compaq's web site, I'll try to
see if I can find information from other  web sites.

----- Original Message -----
From: Roman Shakin <rshakin@unixfreak.org>
To: Adam Glass <adamg@Exchange.Microsoft.com>
Cc: Dave Burgess <burgess@cynjut.neonramp.com>; <bouyer@antioche.lip6.fr>;
<wqiu@webcombo.net>; <port-i386@netbsd.org>; <netbsd-help@netbsd.org>
Sent: Thursday, July 20, 2000 10:43 AM
Subject: RE: Can't detect internal Modem


> I remember that i got a isapnp modem running on my 1.4.2 and it was fine,
> but it did have jumpers, but i had it in pnp mode.
> --Roman
>
> -----------------------------------------
> Roman Shakin
> rshakin@unixfreak.org - email
> (949) 651-7563 - pager
> (949) 655-3000 ext. 1812 - voicemail/fax
>
>
> On Thu, 20 Jul 2000, Adam Glass wrote:
>
> >
> > This is likely a ISAPNP or PNPBIOS enumerated modem with the device id
> > of CPQB024 or CPQB025.
> >
> > -----Original Message-----
> > From: Dave Burgess [mailto:burgess@cynjut.neonramp.com]
> > Sent: Wednesday, July 19, 2000 9:36 PM
> > To: rshakin@unixfreak.org
> > Cc: bouyer@antioche.lip6.fr; wqiu@webcombo.net; port-i386@netbsd.org;
> > netbsd-help@netbsd.org
> > Subject: Re: Can't detect internal Modem
> >
> >
> > > I would like to see the output of the pnpdump, that is if you have it.
> > >
> >
> > I went out to the 56k.com website to see if I could ascertain the modem
> > type from the description below.
> >
> > No such luck - Compaq doesn't even list a 336 model number in their
> > inventory anymore.  With more information, a definitive identification
> > would be possible.  There are several pointers to identifying modems
> > on their site.  Perhaps you could try a couple of those and see if you
> > can
> > get a better handle on the problems.
> >
> > >
> > > On Tue, 18 Jul 2000, Manuel Bouyer wrote:
> > >
> > > > On Fri, Jul 14, 2000 at 01:14:43PM -0600, Wenning Qiu wrote:
> > > > > I've installed NetBSD 1.4.2 on my Compaq Presario 4504 and it can
> > not detect the internal modem. Win95 shows the modem configuration as:
> > > > >
> > > > >     Compaq Presario 336-DF 56K upgradable, interrupt 03, 02F8-02FF
> > > > >
> > > > > The modem works perfectly under Windows 95.
> > > > >
> > > > > NetBSD only detects com0 for serial port 1 at boot time, please
> > see the dmesg out put at the end of this message.
> > > > >
> > > > > I also tried to rebuild the kernel and made sure I included
> > line"com1 at isa? port 0x2firq 3" in the conf file, but I got the same
> > result.
> > > >
> > > > i guess you mean 0x2f8 here.
> > > > It's possible that this is a "winmodem"; in which case it doesn't
> > have an
> > > > UART and NetBSD can't use it.
> > > >
> > >
> >
>