NetBSD 1.4ZD (SUN) #0: Thu Jun 15 20:09:45 PDT 2000
    jmcneill@sun.invisible.ca:/usr/src/sys/arch/i386/compile/SUN
cpu0: family 6 model 0 step 0
cpu0: Cyrix 6x86MX (686-class)
total memory = 65152 KB
avail memory = 58608 KB
using 840 buffers containing 3360 KB of memory
BIOS32 rev. 0 found at 0xfb1b0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0597 (rev. 0x04)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0x8598 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0028 (rev. 0x11)
wsdisplay0 at vga0: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x1106 product 0x0586 (rev. 0x47)
pciide0 at pci0 dev 7 function 1: VIA Tech VT82C586A IDE Controller (rev. 0x06)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 1: <10X, , 1.3E> type 5 cdrom removable
cd0: 32-bit data port
wd0 at pciide0 channel 0 drive 0: <FUJITSU M1623TAU>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 1623 MB, 3298 cyl, 16 head, 63 sec, 512 bytes/sect x 3324996 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
cd0(pciide0:0:1): using PIO mode 3
pciide0: secondary channel configured to compatibility mode
atapibus1 at pciide0 channel 1
cd1 at atapibus1 drive 1: <CR-4804TE, , 2.2C> type 5 cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 3, DMA mode 1
wd1 at pciide0 channel 1 drive 0: <QUANTUM FIREBALL1280A>
wd1: drive supports 8-sector pio transfers, lba addressing
wd1: 1222 MB, 2484 cyl, 16 head, 63 sec, 512 bytes/sect x 2503872 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
wd1(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
cd1(pciide0:1:1): using PIO mode 3, DMA mode 1 (using DMA data transfers)
vendor 0x1106 product 0x3040 (miscellaneous bridge, revision 0x10) at pci0 dev 7 function 3 not configured
ne0 at pci0 dev 13 function 0: RealTek 8029 Ethernet
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne0: Ethernet address 00:80:c8:de:b6:d1
ne0: interrupting at irq 10
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns8250 or ns16450, no fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
wss0 at isapnp0 port 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0
wss0: Crystal Codec WSS/SB: CS4236B compatible
audio0 at wss0: full duplex, mmap
opl0 at wss0: model OPL3
midi1 at opl0: WSS Yamaha OPL3
joy0 at isapnp0 port 0x200/8
joy0: Crystal Codec GAME
joy0: joystick not connected
isapnp0: <Crystal Codec, CSC0010, , CTRL> port 0x120/8 not configured
isapnp0: <Crystal Codec, CSC0003, , MPU> port 0x330/2 irq 9 not configured
biomask fb45 netmask ff45 ttymask ffc7
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
XFree86 aperture driver version 2.0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0

On Sun, 18 Jun 2000, Manuel Bouyer wrote:

> Date: Sun, 18 Jun 2000 23:59:20 +0200
> From: Manuel Bouyer <bouyer@antioche.lip6.fr>
> To: port-i386@netbsd.org
> Subject: need APOLLO pciide data
> 
> Hi,
> could those of you who have APOLLO chipsets (the ones for which the pciide
> controller attaches as "VIA Tech VT82C586A IDE Controller") send me the
> dmesg of the machine, especially if they have any Ultra/DMA capable drive
> attached ?
> It seems that early revs of this controller doesn't support UltraDMA,
> I'd like to make sure that no rev < 6 supports it.
> 
> --
> Manuel Bouyer <bouyer@antioche.eu.org>
> --
> 
>